Blowdown

The MiniVap® Gemini Sample Concentrator is a two-position nitrogen blowdown concentrator and evaporator for high throughput laboratories. The nitrogen blowdown process is ideal for lower boiling point organic solvents such as methanol, dichloromethane, hexane and acetonitrile. The robust design of…

The 15 position MICROVAP evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes. It offers an effective and compact evaporation solution for samples in life science and pharmaceutical laboratories. Each MICROVAP uses minimal…

The Automatic 20 Position N-EVAP® is an advanced blowdown evaporator combining classic blowdown technology with timed automation. The unit can run in automatic or manual mode due to the integration of a unique pneumatic system. The automatic mode removes samples from the heating medium when the…

…(condensed) phosphate, and organic phosphate. Phosphates enter water supplies from soil runoff, cleaning operations, water treatment, boiler blowdown, and sewage. Although necessary for biological growth, too much phosphate causes excessive growth of aquatic plants and eutrophication. Industrial…

…mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed system. Centrifugal force protects samples fromloss and cross-contamination,…

Ultravap® Levante - a automation-ready blowdown evaporator.  Robot-compatible Color touch screen display   Store up to five evaporation programs  *  Remote control from PC  Reversible screen for integration at side of robot  Built-in fume…

UltraVap® Mistral - a automation compatitble blowdown evaporator.  Fully liquid handling robot-compatible dry down station  Plate shutttle sends/retrieves plates from robot deck  Adjustable shuttle position and height  Touch screen display  Store up to…

The MiniVap® is designed for low usage R&D departments where low numbers of individual plates or vials need drying. The MiniVap® is easy to operate and maintain. Can be used with any ANSI/SLAS 96-well plate. Compact footprint - fits all standard fume cupboards.

The triple plate MICROVAP® microplate evaporator combines three 96 needle manifolds and three heat blocks into a single platform. This allows for simultaneous evaporation of up to three 96 well plates. The triple plate MICROVAP’s solid aluminum heating units provide consistent temperature…

The 24 position MICROVAP evaporator is intended for concentrating small volume, small batch samples, such as concentrations of groups of samples in microcentrifuge tubes and GC vials. It offers an effective and compact solution to evaporation of samples for life sciences and pharmaceutical…

The 6 position N-EVAP’s ability to expand the sample size range with an optional large sample holder makes it an ideal instrument for laboratories that will be evaporating up to 6 samples at once and are using a wide range of sample flask outside diameters. The standard instrument fits samples…

The single plate MICROVAP microplate evaporator is one of the most compact sample concentrators available, and it continues to meet the needs of the life science and pharmaceutical industries. This microplate concentrator is ideal for laboratories needing efficient solutions for the gentle…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

…absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative impact on…

…absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative impact on…

…absence of a Rotavapor the Stand-alone Setup provides a comprehensive, sophisticated and independent evaporation system. In contrast to nitrogen blow-down evaporators, evaporation under vacuum is in accordance with the regulations of ISO 14000 that guarantees the smallest possible negative impact on…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The MULTIVAP® blowdown evaporator is ideal for concentrating large batches of samples, and can be used in numerous sample preparation methodologies. These instruments contain a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to…

The 45 Position N-EVAP® nitrogen evaporator offers the largest number of sample positions in the N-EVAP line. The sample holder has dual circular rings. The outer ring has 30 positions and can accommodate samples with an outside diameter of 10-19 mm. The inner ring has 15 positions and can…

The 34 Position N-EVAP® nitrogen evaporator offers a large number of sample positions, without compromising any of the classic N-EVAP features. This time-tested, durable system provides one of the least expensive prices per position of the N-EVAP line. The evaporative system, along with the…

The 24 Position N-EVAP® is Organomation’s most adaptable evaporator. The basic model offers all of the standard features from our N-EVAP line. Additionally, the 24 position N-EVAP offers the most customizable options for your sample preparation needs. The standard sample holder can…

The 12 Position N-EVAP® nitrogen evaporator is a compact unit that allows for up to 12 samples to be evaporated simultaneously. At each individual sample position the gas flow can be controlled via a precision needle valve. This is ideal for the simultaneous evaporation of samples with varying…

UltraVap® Mistral - a automation compatitble blowdown evaporator.  Fully liquid handling robot-compatible dry down station. Plate shutttle sends/retrieves plates from robot deck  Adjustable shuttle position and height  Touch screen display  Store up to 15…

Nitrogen gas generator for general lab purposes such as nitrogen blowdown evaporation. The generator produces 95-99% purity nitrogen gas at up to 80 L/min. Membrane technology separates nitrogen from other gases in a compressed air stream. The generator must be used with an oil-less air compressor…

Blunt end (90° cut) stainless steel needles with a luer lock fitting, used for nitrogen gas blowdown. Available with chrome plated or polypropylene hubs. Optional FEP coating protects against corrosive solvents. 4 inches long 16 or 19 gauge

…mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed system. Centrifugal force protects samples fromloss and cross-contamination,…

…mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed system. Centrifugal force protects samples fromloss and cross-contamination,…

…scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed system. Centrifugal force protects samples fromloss and cross-contamination,…

…mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed system. Centrifugal force protects samples fromloss and cross-contamination,…