Benchtop Cooler

Compare Tool

Select up to 3 products

Benchtop Cooler
1 - 17 of 17
  • …LP Benchtop Cooler has a capacity of 32 x 1.5 mL tubes and weighs 1.2 kg. The StrataCooler provides protection for your enzymes in the freezer or on the benchtop. It maintains -15 °C for at least 2 hours on the benchtop. The StrataCooler cryo preservation module is offered with the benchtop

  • Benchtop Bottle Coolers

    Diversified Biotech

  • Mini Coolers & Chillers

    Globe Scientific

    …non-skid feet to prevent sliding on the benchtop. The new Globe Scientific Cryogenic Cooler provides controlled cooling for cryogenic preservation and recovery of cells. When filled with 100% isopropyl alcohol and placed in a mechanical freezer, the cooler maintains the 1°C per minute…

  • …ideal for benchtop use All polycarbonate cooler body cleans easily Use to protect samples in freezers with defrost cycle and fluctuating temperatures Use this cooler to contain 15ml centrifuge tubes up to 125 mm tall. A non-toxic freezing gel is isolated within the walls of the cooler, ensuring…

  • -20°C Labtop Cooler

    Thermo Scientific Nunc

    Stackable Locking handle Maintains freezer temperature Break-resistant polycarbonate Holds twenty 1.5 or 2.0 mL microcentrifuge tubes or Cryotube™ vials. Inserts are included to accommodate 0.2 to 0.5 mL tubes. Protects enzymes, cells, reagents and solutions by maintaining freezer…

  • Labtop Cooler Jr.

    Thermo Scientific Nalgene

    -20°C Labtop coolers for microtubes or cryovials Enclosed, 32 and 12-place microtube coolers Accomodates 0.5 and 2.0 mL microtubes or cryovials 5152M16 maintains temperature below -15°C for two hours and 5152M18 maintains it for one hour. Blue polycarbonate lower section is…

  • Labtop Test Tube Coolers

    Thermo Scientific Nalgene

    …bench top. Coolers have a gridded and keyed lid to help maintain proper orientation and inventory on tubes. Coolers accommodate tube height up to 125 mm when lid is closed. Each is break-resistant, stackable and has non-skid feet to keep coolers from sliding on bench surface. Coolers have a green…

  • … Can be used as a freezer, refrigerator or incubator. Supplied with two 2 1/8” x 3 1/4” blocks for holding 14 x 1.5 mL tubes. Standard Size Cooler Blocks (5152M65 and M70) Blocks are 3” x 3 3/4” x 2” and include self-contained sample extractor. Blocks can be accommodated by Boekel Hot Block…

  • …Circulating Bath Coliform Bath General Purpose Water Baths Chillers & Coolers BENCHTOP CHILLERS LM Series Benchtop LS Series Benchtop MM Series Benchtop 6000 Series Chiller NON REFRIGERATED COOLERS 3370 Liquid-to-Air Cooler 4100 Liquid-to-Liquid Cooler

  • … 75L Refrigerated Circulating Bath Histology Products Chillers & Coolers BENCHTOP CHILLERS LM Series Benchtop LS Series Benchtop MM Series Benchtop 6000 Series Chiller NON REFRIGERATED COOLERS 3370 Liquid-to-Air Cooler 4100 Liquid-to-Liquid Cooler  

  • Easy to use compact benchtop immersion cooler in combination with water bath. Performance and functions Cools down water bath immediately by dipping cooling coil into fluid Improved safety by adopting overcurrent circuit breaker Spiral tube of BE201 changed from copper to chrome…

  • 64-Place Step Chamber

    Diversified Biotech

    Description: Anodized aluminum block sized to fit 64 1.5ml microtubes (16 holes per 'step') for easy viewing of samples when in the freezer, on the bench-top or in an ice pan or ice bucket.

  • …unbreakable, open easily when frozen, and are not cold to the touch when frozen - no "frosty" fingers. Holds 6 or 12 injectable vials. Vial fill volume: 1 mL per vial. Includes the XT Starter benchtop Cooler and CoolCell SV2/SV10 cell freezing container for 12/6 injectable vials.

  • Chill, freeze or heat and run unattended temperature profiles automatically Precise, digital control Energy efficient Peltier design Control at ambient Temperature ramping at exact rates Built-in data logger Applications include unattended restriction digestions or…

  • XT Starter Kits


    …a -20°C cooler until frozen. When ready to use, rest the XT Cooling Core on the bench until the Temperature Indicator registers 1°C (approximately 10 minutes). Then insert the XT Cooling Core into the XT Holder and place the CoolRack PCR module on top. The XT Starter cooler can be used…

  • XT Starter


    Low profile, open platform ice-free cooler XT Starter is an open platform cooler that keeps samples at a uniform 2°C for over 4 hours - without ice, batteries or electricity. XT Starter accommodates most CoolRack and CoolSink sample modules, making it a versatile and flexible tool for a…

  • …chemical resistance. The surface is easy to clean and the thermal properties allow very high plate temperatures while ensuring the edges stay cooler, reducing the chance of accidental burns. The white surface ensures good visibility of colour changes. Model US152 has a robust…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.