Bench Mats

…resistant, wet or dry Smooth white surface can be written on with ink or pencil and lies flat Suitable for saturation with disinfectant to protect benches where pathogens and other bacteria are present Use polyethylene side up to collect deposits without absorption Paper side quickly absorbs…

The Porvair Sciences Mat Capper is an easy application of re-usable cap mat. Perfect for laboratories having to seal medium numbers of microplates, the Mat Capper offers an affordable solution. Compact and portable, the Mat Capper is easy to use requiring only one operation of the system to produce…

Disposable bench and drawer liner Facilitates clean-up and protects work surfaces from stains, spills and wear Cuts easily to desired size with scissors or the Scienceware Safety Cutter Non-skid plastic backing stops most solutions from soaking through, while the highly absorbent upper…

The Slide Drying Bench aids in the preparation of microscope slides at the specimen mounting stage. It complements both the Paraffin Wax Dispenser and the Paraffin Wax Mounting Bath to provide a complete set of paraffin wax sampling equipment for the modern laboratory. Accepting up to 50 slides,…

…trays, boxes and other flat vessels. BioRocker 3D Rockers are supplied with autoclavable flat mats and are ideal for blot washes and gel staining/destaining. Models have been designed to conserve bench space. The BioRocker 3D is supplied with a 12 x 12 inch platform that expands the useable work…

…boxes and other flat vessels. BioRocker 3D Mini Rockers are supplied with autoclavable flat mats and are ideal for blot washes and gel staining/destaining. Models have been designed to conserve bench space. The Mini Rocker is supplied with a 10.5 x 7.5 inch platform. The BioRocker 3D Mini…

…Mini is designed to provide the ideal speed and tilt angle (24 rpm / 30°) for agitation of sample tubes. The grooved design of the included rubber mat properly secures all tube sizes ranging from 1.5 to 50ml, without the use of added straps or bands. There are no complicated controls, no settings…

…is designed to provide the ideal speed and tilt angle (24 rpm / 30°) for agitation of sample tubes. The grooved design of the included rubber mat properly secures all tube sizes ranging from 1.5 to 50ml, without the use of added straps or bands. There are no complicated controls, no settings…

Inert to most chemicals Non-stick and easy to clean Easily cut and mounted Use to resurface bench tops and line fume hoods Bytac ® is a laminate consisting of FEP film that is bonded to an aluminum support backing. The backing is coated with a pressure-sensitive, acrylic adhesive. Bytac ® …

Inert to most chemicals Non-stick and easy to clean Easily cut and mounted Use to resurface bench tops and line fume hoods Bytac ® is a laminate consisting of FEP film that is bonded to a vinyl support backing. The backing is coated with a pressure-sensitive, acrylic adhesive. Bytac ® …

Chemware® PTFE Laboratory Matting resists stains and adhesion of a wide range of materials and it is easy to clean. It can be used on benches, sinks, drain boards and shelves to reduce breakage of glassware. The laboratory matting has a diamond-shaped PTFE mesh and is 1/16" (1.6mm) thick…

Clear, ribbed matting for lining laboratory tables, shelves and trays In rolls 760 mm wide x 15 meters long Thickness 0.25 mm; with 0.76 mm thick ribs Easily cut with scissors

BenchGuard™ roll dispenser. BenchGuard and BenchGuard  Extra have highly absorbent upper surfaces that contain  spills and a tough polycoated base to protect your  work surface. Standard BenchGuard absorbs up to 400ml  per square meter, the competition absorbs 274ml or…

Polyethylene Foam For lining benches, shelves and drawers Closed-cell, cross-linked, polyethylene foam, 1/8-inch thick, produces a resilient, protective, nonabsorbent work surface Matte-white finish Both sides usable 50-foot rolls can be cut to size Can be stapled, tacked…

Spilfyter® Soakers provide absorption protection against spills and cushioning to minimize breakage. Soakers are made with multiple layers of 100% recycled tissue and a plastic poly backing for diaper-like characteristics. Heavy duty models feature durable fabric top.

…(750 mL ) or super (1,050 mL ) absorbencies. Soft, non-abrasive, skid-resistant material will not scratch delicate surfaces or equipment. Strong enough to be used as a floor soaker, the durable cloth-like top layer will not fall apart, even when wet. Available in rolls, dispenser packs or mats.

Surface protector for chemical cabinets, laboratory benches and hoods Pure cellulose paper with an impermeable polyethylene coating on one side Tear resistant, wet or dry Smooth white base paper side may be marked with ink or pencil Cost effective Polyshield Fluid Barrier…

Bio-Screen® Products protect against soak through of blood-borne pathogens, body fluids and chemicals; and limit cross-contamination from gloves to phones, pens, keyboards... Orange Barrier Side: Blocks soak through of blood, body fluids and chemicals to gloves and counters. Inhibits…

…the touch of the wrist Low profile and small footprint minimizes bench space Accommodates a variety of blood tubes, centrifuge tubes, glass vials, or plates Includes two white mats, one dimpled and one flat Rubber mats can be cleaned with soap and water and can be autoclaved 2-year…

…boxes and other flat vessels. The BlotBoy series comes standard with autoclavable flat mats and are ideal for blot washes and gel staining/destaining. Both models have been designed to conserve bench space. The Mini BlotBoy is supplied with a 10.5 x 7.5 inch platform while the BlotBoy’s…

…and low profile design. Lightweight and easy to carry, it can be easily transported from the lab bench to a cold room or incubator. The large load capacity (7 lbs.), optional dimpled mat for centrifuge tubes and multiple platform tie-down points make this rocker suitable for a wide variety…

…tilt angle (30°) Lightweight and easy to carry, it can be easily transported from the lab bench to a cold room or incubator. The large load capacity (7 lbs.), optional dimpled mat for centrifuge tubes and multiple platform tie-down points make this rocker suitable for a wide variety…

…The unique, sliding attachment allows for quick and easy changing of tube holders. For rocking applications, a platform with a non-slip rubber mat is available. Once attached, simply select the "PP" mode to turn the rotator into a platform rocker. Features Advanced…

…flexibility. The 222DS lab incubator lid has a low pivot point which provides a compact lab friendly shaking incubator sure to fit on the lab bench and under your shelves. The large assortment of accessories allows users the flexibility to use for many molecular biology applications. The included…

…(8.9cm) above lower tray. Includes hardware and a rubber mat. Dimpled Mat 11.75 x 8.75" (29.9 x 22.2cm) Designed to hold centrifuge tubes, vials, culture tubes, and micro tubes securely in place. Mat can be easily removed for cleaning and transporting of tubes from bench to tray

… Accessories: Talboys Dimpled Mat for Mini Shaker (Thomas No. 1217Q86 ) Designed to hold centrifuge tubes, vials, culture tubes, and micro-tubes securely in place. Mat can easily be removed for cleaning and transporting of tubes from bench to tray. Talboys Universal Harness …

These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to any…

These compact rockers are ideal where gentle mixing is required, either on the bench or in incubators. Choice of two models: Model SSM3 provides a 3D gyratory motion, ideal for low foaming agitation, DNA extractions, staining and de-staining procedures etc. The angle of tilt can be moved to any…

…variety of environmental conditions. Rocker is supplied with an 14 x 11" (35.6 x 27.9cm) non-skid rubber mat. Operating Features : Low Profile Design : Takes up less bench space and fits in most hoods and incubators. Two-tier option increases the capacity with the same footprint…

…and bottles up to 2 liter. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation.

…hematology, and blotting techniques. Accessories: Talboys dimpled mat 10 x 7.5" (25.4 x 19.1cm) Designed to hold centrifuge tubes, vials, culture tubes, and micro tubes securely in place. Mat can be easily removed for cleaning and transporting of tubes from bench to tray.

…maintenance free and helps lower the cost of ownership The modern low-profile design is compact and has a small footprint for labs with limited bench space and limited height that ultimately helps reduced clutter in the lab An easy to use back-lit digital control panel for time, speed and…