Barbed Tubing Connector

Compare Tool

Select up to 3 products

Barbed Tubing Connector
1 - 32 of 33
Sort
View
Show
  • Quick Couplings for Plastic Tubing

    Konstance Pneumatics

    …flexible tubing 1/16” to 3/8” id Reliable leak free plastic tubing connections Adds convenience to any fluid or gas handling system Simple one-hand operation Valve or straight through flow Use standard Delrin® acetal for mild chemicals. Use hose barbs for…

  • Valved Barbed Quick Disconnects

    Thermo Scientific Nalgene

    …The barbed fitting on each end and internal valve in the middle, which seals when the fittings are removed, are ideal for use in developing in-house fluid transfer systems. Fluid flow stops when fitting halves are separated Designed for one-handed quick disconnect with flexible tubing

  • EVA Collection Bags with 3/8" Connectors

    Corning cellgro

    …resistant, heat sealable flexible tubing, Male MPC connector with 3/8" barb, female MPC cap Port 2: 3/8" connector, 12" length 3/8" I.D. x 5/8" O.D. chemically resistant, heat sealable flexible tubing, Female MPC connector with 3/8" barb, Male MPC plug Port 3:…

  • Y Connector Tubing Adapters

    Foxx Life Sciences

    Foxx Life Sciences Y connectors are available in a variety of standard sizes. They are guaranteed to provide a secure, watertight and airtight connection. Made from Polypropylene Non-corrosive Durable

  • Scienceware® Quick Connectors

    Bel-Art Products

    Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…

  • Scienceware® Wye (Y) Tubing Connectors

    Bel-Art Products

    Use these fittings to ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Multiple barbs per arm provide additional contact between the fitting and the tubing for extra gripping power Chemical-resistant polypropylene plastic for use with a…

  • Spinner Flask

    Corning

    …pore PVDF membrane and a barbed fitting The liquid transfer port has an internal end with a rigid polypropylene dip tube angled to reach the bottom of the flask and on the external side a 1/8 inch ID (3.2 mm), 1/4 inch OD C-Flex tubing ending in a male luer lock (MLL) connector closed with a female…

  • Vacuum Tubing Kit

    Labconco

    …Kit includes 1/4" ID and 1/2" ID vacuum tubing, each 48" long, two each 1/4" and 1/2" tubing clamps; 1/4" to 1/2" barbed reducer Kit allows connection of the Desiccator's 1/4" diameter brass needle valve to an accessory pump with 1/2" connector

  • Scienceware® “T” Shaped Tubing Connectors

    Bel-Art Products

    Connectors have multiple barbs per arm providing additional contact between the fitting and the tubing for extra gripping power. Ensures a tight, secure connection between lengths of tubing having the same inner diameter (I.D.) Chemical-resistant polypropylene for use with a wide range of…

  • Graduated Filtering Flasks with Quick-Release Hose Barb Connectors

    DWK Life Sciences (Kimble)

    connector designed as a safety feature Hose barb accommodates 1/4 inch ID tubing Tubing can remain permanently attached since the opposite end is designed to be easily assembled via a positive threaded seal Proper positioning of the connector provides greater flask stability, as tubing

  • Reducer Tubing Adapters

    Foxx Life Sciences

    Foxx Life Sciences connectors are available in a variety of standard sizes. They provide a secure, watertight connection. These connectors make it possible to connect two hoses, securely and efficiently. Made from polyethylene.

  • T Connector Tubing Adapters

    Foxx Life Sciences

    Foxx Life Sciences T connectors are available in a variety of standard sizes. Our NPT threaded and barbed tees offer strength and durability. Made from Polyethylene.

  • Riteflow® Aluminum Mounted Flowmeters

    Bel-Art Products

    …for easy reading of flow measurements. Tubing connectors are rear mounted for attachment to an instrument when used as a bench stand. A Leveling Base (optional) assures that the meter is vertical, eliminating error caused by friction between the float and tube. Mounted Flowmeters with Aluminum…

  • Bottle Reservoir 2L

    DWK Life Sciences (Kimble)

    …an 8 mm valve which can be used with 1/4" flexible tubing (not supplied) attached to the quick-release hose barb connector. It may also be used with rigid 1/4" O.D. PTFE tubing with the o-ring and cap supplied on the quick-release connector. Glass conforms to ASTM E438, Type I, Class A.

  • Sanitary Hose Barb Connector

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Sanitary 1 in. Hose Barb connector supports connections between 1 ″ sanitary fitting to flexible tubing with inner diameter of 0.5".

  • Metal Quick Disconnect Couplings

    Bel-Art Products

    …connections, and automatic shut off when disconnected. Ideal for liquid and gas connectors in biomedical instrumentation and general industrial applications Hose barb ends accept flexible tubing Chrome plated valves provide dependable operation Operate at temperatures to 82°C…

  • E-Cube Culture System

    Corning

    … E-Cube Fittings Kit contains 3/16” Norprene™ pump tubing (18”); 6 tubing ratchet clamps; 2 barbed T-fittings; 1 barbed reducing connector; 20 4 wire ties; 1 barbed Y-connector; 5 each male and female barbed luer fittings; 2 male luer plugs; 2 interlink injection sites; 1 sleeve…

  • Condenser, Allihn, With Ace-Thred Connectors

    Ace Glass

    Bulb type, approximately one bulb per 50 mm, with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred and Ace-Safe PTFE hose connections on inlet and outlet with barb for 1/4" I.D. tubing. For replacement connectors, see 5853.

  • Condenser, Liebig, with Ace-Thred Connectors

    Ace Glass

    No Hold Up condenser with standard taper 24/40 inner and outer joint at bottom and top, #7 Ace-Thred inlet/outlet for connecting Ace-Safe hose connections with barb for 1/4" I.D. tubing. For replacement hose connections, see 5853. Complete item include

  • EVA Collection Bags with MPC Connectors & Vinyl Cap

    Corning cellgro

    … Available in 10L and 20L sizes Film type: EVA Port 1:  Female MPC connector with 1/4" barb + plug, Slide clamp Port 2:  Male MPC connector with 1/4" barb + cap, Slide clamp Port 3:  Vinyl cap, Swabbable valve, Female luer with barb

  • EVA Collection Bags with Male Luer & Male MPC Connectors

    Corning cellgro

    …luer connector with 1/8" barb + cap, 2' length 1/8" I.D. x 1/4" O.D. chemically resistant, heat sealable flexible tubing, slide clamp Port 2:  Male MPC connector with 3/8" barb + cap, 6" length 3/8" I.D. x 5/8" O.D. PCMGS tubing, Slide…

  • Bottle Reservoir 20L

    DWK Life Sciences (Kimble)

    …1/4” flexible tubing attached to the quick-release hose barb connector and with rigid 1/4” OD PTFE tubing with the o-ring and cap supplied on the quick-release connector ·     Bottle supplied with valve, cap, hose barb connector and o-ring …

  • Scienceware® Table-top Buchner Funnels

    Bel-Art Products

    …quickly Polyethylene funnels, available is either Fritware® or Perforated filter plate. Contains a removable hose barbed connector that accepts 12.7mm (1/2") I.D. tube and threads into 3/4" NPT bung on the funnel. Fritware® Porous Filter Plates Fixed or Removeable High-density…

  • Connector, Ace-Safe, Tubing, PTFE

    Ace Glass

    Ace Safe threaded tubing connectors used to connect flexible tubing to #7,#11 or #15 Ace-Threds. Allows for easier connect-disconnect of tubing. A much safer design than glass hose barbs. All PTFE construction for lower extractables and higher temperature capability than the standard…

  • Fitting Kit for ASXPRESS PLUS

    PerkinElmer

    It includes: 2 ea. green flangeless connectors, CTFE 2 ea. blue flangeless connectors, CTFE 2 ea. white flangeless connectors, CTFE 2 ea. natural flangeless connectors, CTFE 10 ea. CTFE ferrules for 1/16 inch (1.58 mm) tubing 1 ea. 6.4 mm to 3.2 mm (¼-28 UNF to 1/8") barbed fitting - ETFE

  • Carrier Solution Tee Assembly, Aqueous Applications, for ASXPRESS PLUS

    PerkinElmer

    The tubing, made of PFA, has an inner diameter of 0.8 mm and an outer diameter of 1.6 mm. Its length is 91.5 cm. The assembly includes a barbed tee fitting and a 1.6 mm fangless connector.>/p>

  • YSI Conductivity Cells

    YSI

    … Precision cells contain platinized platinum-iridium electrodes Accurately calibrated to ±1% of cell constant Connector is spade lug type 3240D35 microcell can be used in test tubes with 5 mL sample Handle flows up to 7 gallons per minute Standard barb fitting

  • Jacketed Double Sidearm Celstir® Spinner Flasks

    DWK Life Sciences (Wheaton)

    …with water jacket allows precise temperature control of its contents when operated with a recirculating water bath. The hose connectors accept 1/4 in (6.35 mm) ID tubing. This unit is made from Wheaton 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E-438 Type I, Class…

  • E-Vac Aspiration System

    Argos Technologies

    …equipped with quick-release tubing connectors for safe and convenient tubing connections; and level detection sensor that automatically shuts the pump off when the bottle is full. Polypropylene bottles are also available with lid fitted with standard barbed tube fittings. Compact,…

  • Standard Aqueous 50 mL Glass Twister Spray Chamber Assembly for Optima 2x00/4x00…

    PerkinElmer

    …Mount Sleeve (N0776004) Cyclonic Spray Chamber Mount Ring (N0776003) 1.78 I.D. Viton ® O-Ring (09902234) Nipple 1/8 Barb Fitting (09903730) Thumb Screw #8 Knob (09908517) M4 Hex Nut (09919035) M3 Cap Screw (09919052) M4 Cap Screw (09919167) 2.8 mm I.D. PVC Solvent Flex Tubing (09985735)

  • WaterPro® BT™ Water Purification System

    Labconco

    …warranty. Power cord and plug. Miscellaneous accessories: 10' (3 m) clear tubing and 3/8" ID hose barb for the Type I dispensing valve; 8 x 8 mm elbow connector and 3' (1 m) of 8 mm tubing with ball valve for the tank outlet; and two each 1 micron Air Vent Filters. UL* listing.…

  • Condenser, Coiled

    Ace Glass

    Coiled condensing tube, with 24/40 inner and outer joint at bottom and top. Available in various lengths with hose barbs or Ace-Safe connectors.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.