Barbed Fittings

Compare Tool

Select up to 3 products

Barbed Fittings
1 - 32 of 94
Sort
View
Show
  • Barbed Bulkhead Fittings

    Thermo Scientific Nalgene

    For retrofitting closures for liquid transfer (non-vented) Nalge 6149 1/4 or 1/2 inch tubing choice Each fitting kit includes 2 polypropylene fittings, acetal nuts, silicone gaskets and TPE port caps. Autoclavable. Cap not included.

  • Quick Connect Closures, Hose Barb Fittings

    Thermo Scientific Nalgene

    Hose barb fitting to quick connect adapters Nalge 2159 series Provides multiple connection to the quick filling closure ports Ultimate in versatility and adaptability in creating vacuum trap type systems. Available in straight or elbow design to fit 1/4” or 3/8” tubing…

  • Closures With Barbed Bulkhead Fittings

    Thermo Scientific Nalgene

    …culture vessel with ports Nalgene ® 2167 For fluid transfers on Nalgene containers with 38-430 closures Closures and fittings are autoclavable Unassembled 38-430 white polypropylene closures are pre-drilled for a 1/4” or 1/2” barbed bulkhead fitting.

  • Male Barb CTFE Fitting for Peripump Union for NexION 2000/1000

    PerkinElmer

    Four Male Peripump Union barb fittings are included in the NexION 2000 ICP-MS Base Configuration's Consumable Kit (N8150054), Core Configuration's Consumable Kit (N8150055), Productivity Configuration's Consumable Kit (N8150056), and Semi Configuration's Consumable Kit (N8150057).

  • Female Barb CTFE Fitting for Peripump Union for NexION 2000/1000

    PerkinElmer

    Four Female Peripump Union barb fittings are included in the NexION 2000 ICP-MS Base Configuration's Consumable Kit (N8150054), Core Configuration's Consumable Kit (N8150055), Productivity Configuration's Consumable Kit (N8150056), and Semi Configuration's Consumable Kit (N8150057).

  • Fitting Sanitary Adapter 3/4" Mini PP 1/2" Hose Barb

    Thermo Scientific Nalgene

  • Valved Barbed Quick Disconnects

    Thermo Scientific Nalgene

    …Scientific™ Nalgene™ Valved Barbed Quick Disconnects. The barbed fitting on each end and internal valve in the middle, which seals when the fittings are removed, are ideal for use in developing in-house fluid transfer systems. Fluid flow stops when fitting halves are separated …

  • EZwaste® Replacement Fittings

    Foxx Life Sciences

    …MNPT fitting, Straight Filter Fitting Pack is the replacement fittings for EZwaste® Solvent Waste System's fittings. It includes (10) 1/4" MNPT fitting, Straight Filter Fitting. 1170A83 The 1/4" MNPT fitting, Straight Filter Fitting Pack is the replacement fittings for…

  • Sanitary Hose Barb Connector

    Thermo Scientific Nalgene

    Thermo Scientific™ Nalgene Sanitary 1 in. Hose Barb connector supports connections between 1 ″ sanitary fitting to flexible tubing with inner diameter of 0.5".

  • CTFE Liquid Fitting - female

    PerkinElmer

    CTFE Liquid fitting - female with barb end

  • Whatman Polycap GW

    GE Healthcare

    …ground water sampling filter capsules are a polyethersulfone (PES) filter that can be used as a convenient in-line filter unit. Stepped hose barb fittings allow for connection directly to outlet of a sampling pump with various size tubing Effective filtration surface area of 600 cm² to ensure…

  • CTFE Liquid Fitting - male

    PerkinElmer

    CTFE Liquid fitting - male with barb end

  • Fitting Kit for ASXPRESS PLUS

    PerkinElmer

    It includes: 2 ea. green flangeless connectors, CTFE 2 ea. blue flangeless connectors, CTFE 2 ea. white flangeless connectors, CTFE 2 ea. natural flangeless connectors, CTFE 10 ea. CTFE ferrules for 1/16 inch (1.58 mm) tubing 1 ea. 6.4 mm to 3.2 mm (¼-28 UNF to 1/8") barbed fitting - ETFE

  • Nebulizer Liquid Fitting with ETFE capillary tubing

    PerkinElmer

    Nebulizer liquid fitting with ETFE capillary tubing - 4 length by 0. 020 ID x 0. 062 OD flanged onto female CTFE fitting Includes one male barb CTFE fitting.

  • Polycap™ HD (Heavy-Duty) Capsule Filters

    GE Healthcare

    …with all bonds fused and no extraneous materials such as glues, adhesives, metals, mold release agents or surfactants are used. Stepped barb inlet and outlet fittings take 1/4" to 3/8" (6 to 12 mm) tubing. Typical applications include: general fine filtration, prefiltration, clear air/gas,…

  • Quick Couplings for Plastic Tubing

    Konstance Pneumatics

    …Acetal Hose barb fitting Coupling Body, Panel Mount (9580X26, X30, X32) With shutoff valve Delrin® Acetal Hose barb fitting Coupling Body, In Line (9580X50, X54, X56) With shutoff valve Delrin® Acetal Hose barb fittings Coupling…

  • Whatman Polydisc In-Line Filters, Aqueous Solution

    GE Healthcare

    …prefilter removes heavy particulates, increasing membrane longevity Radiation sterilized, so there are no ethylene oxide (EtO) residuals Barbed hose connections fit multiple tubing sizes Integrity-testable with the bubble point method Lightweight design prevents tubing collapse Whatman filters…

  • IWT Ionxchangers, Wall Brackets

    Evoqua Water Technologies

    Two types available Can be used in either single or duplex cartridge operation mode Model 3923D40 has a faucet adapter, 3 ft. hose and barb fittings. Model 3923D50 has 1/4in. tube threaded fittings for more permanent connection to a water line. Recommended line input pressure is 30 psi.

  • Polycap TF PTFE Membrane Capsule Filters

    GE Healthcare

    …surfactants are used. Available in two sizes, 500 or 1000 cm 2 . Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB) or 1/4" Male National Pipe Thread (MNPT) inlet fittings as noted below. Filters are sold individually. *@ 1.0 bar (14.5 psi) …

  • Sciencware® Stopcocks

    Bel-Art Products

    …Connections This polypropylene stopcock has a detachable, watertight and inert Teflon® PTFE plug that contacts any fluid being dispensed. The barbed fitting end accepts 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing. Three-way models allow connection of two or three arms. Pressure rating is 240 KPa (35…

  • Polycap As Nylon Membrane Capsule Filters

    GE Healthcare

    …into a bottle, flask or other container. Inlet and outlet fittings are 1/2" (3/8" to 1/2" tubing) or 1/4" (1/4" to 3/8" tubing) step barb (SB), except 4651B03, B17 and B21 which have 1/4" Male National Pipe Thread (MNPT) inlet fittings. Filters are sold individually. *Typical values @ 1.0 bar…

  • Tubing Sinker Set

    Bel-Art Products

    …tube sinkers for efficient emptying of containers by pumps or dispensers Weighted ends are open in the center Feature a tapered, barbed fitting that easily inserts into the I.D. of the tubing Sinker keeps the attached tubing submerged in the liquid Teflon® construction means…

  • Polycap™ TC Polyethersulfone Capsule Filters

    GE Healthcare

    …are used. Available in three sizes, with and without filling bell. Inlet and outlet fittings are 1/4" (for 1/4" to 3/8" tubing) or 1/2" (for 3/8" to 1/2" tubing) step barb (SB). Typical uses include pharmaceutical aqueous solutions, tissue culture media, virus…

  • YSI Conductivity Cells

    YSI

    … Precision cells contain platinized platinum-iridium electrodes Accurately calibrated to ±1% of cell constant Connector is spade lug type 3240D35 microcell can be used in test tubes with 5 mL sample Handle flows up to 7 gallons per minute Standard barb fitting

  • Vent Filter for PE Tank (Type 3 Water)

    MilliporeSigma

    Prevents contamination of RiOs™ water stored in 30/60/100 PE storage tanks. Fitting Outlet: Hose barb

  • Carrier Solution Tee Assembly, Aqueous Applications, for ASXPRESS PLUS

    PerkinElmer

    The tubing, made of PFA, has an inner diameter of 0.8 mm and an outer diameter of 1.6 mm. Its length is 91.5 cm. The assembly includes a barbed tee fitting and a 1.6 mm fangless connector.>/p>

  • White Premium Food Grade Silicone Vacuum Tubing

    Across International

    …odors and maintains its flexibility over time. Use with water, air, and food and beverage. Tubing is made from FDA-compliant resins. Material meets ASTM D2000. Tubing can be sterilized with steam (autoclaving) and radiation. Temperature Range: -94°F to 392°F Use with barbed fittings

  • Stainless Steel Vacuum Manifold

    Thermo Scientific Nalgene

    …securely holds a No. 8 stopper and the stem filter funnel without interference Autoclavable Easy manipulation of individual funnels due to spacing of outlets. Teflon stopcock on each valve shuts off flow when fewer than three outlets are used. Barbed fitting accepts 3/8” i.d. tubing.

  • Glass Cyclonic Spray Chamber and Adapter Assembly for Optima 2x00/4x00/5x00/7x00…

    PerkinElmer

    …Spray Chamber Mount Ring (N0776003) 20 mm M4 Cap Screw (09919167) 6 mm M3 Cap Screw (09919052) 3.2 mm M4 Hex Nut (09919035) Round #8 Thumb Screw Knob (09908517) Polyproylene Nipple Barb Fitting (09903730) Viton ® O-Ring 1.78 mm I.D. (09902234) 3.175 mm I.D. Tygon ® Tubing (02506516)

  • Organics Spares Kit for Optima 2x00/4x00/5x00/7x00 DV

    PerkinElmer

    … 2.0 mm I.D. Quartz Injector, Qty. 1 (N0775014) 1.6 mm I.D. Quartz Injector, Qty. 1 (N0775223) Injector Support Adapter, Qty. 1 (N0770603) Barb Fitting Nipple for 3.175 mm & 1.66 mm Tubing, Qty. 3 (09903730) Yellow Solvent Flex Tubing 2.79 mm I.D., 4.88 cm Length, Qty. 1 (09985735)

  • MiniVac Waste Collection System

    Argos Technologies

    …polypropylene cap with barbed fittings and tubing. Clear PETG plastic safety reservoir collects liquid in case flask cracks or leaks Use as stand-alone waste collection system or overflow vessel Polypropylene barbed cap fittings eliminate risk of broken glass rod fittings Use with…

  • Consumables Kit for NexION 2000 Semiconductor Configuration

    PerkinElmer

    …(feet) qty.6 (02506495) Sample Uptake Tubing qty.12 (WE024375) Sample Introduction Line for PFA-ST Nebulizer qty. 1 (N8152455) Female Barb CTFE Fitting qty.4 (N8152388) Male Barb CTFE Fitting qty.4 (N8152453) Instrument Filter (Left) qty. 2 (N8152167) Instrument Filter (Right) qty.2 (N8152136)

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.