Automatic Dispenser

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

…Volume dispense from 50 ml Delivers a flow rate of 1 liter per minute The system is equipped with a high-resolution, touch-activated color display. Easy-to-understand icons guide the user intuitively through the menu. The Favorites function automatically stores the volume last dispensed.…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

…intuitive menu. The “Favorites” function automatically saves the volume you dispensed last. This increases your efficiency and prevents errors when repeatedly dispensing the same volumes. Likewise, the volume-controlled dispensing function from 50 ml to 5 l (in 50-ml-increments) helps…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

…procedure, metal ions are typically in the low PPB or even PPT range. The platinum-iridium model is also suitable for the dispensing of hydrofluoric acid. The dispensing cartridge is replaceable Instruments feature a sliding pointer, well suited for rapid volume changes from one end of the range…

The new Dispensette® S builds on a half century of BRAND® bottletop dispenser experience. It features a floating piston design with even lower operating forces, a new safety discharge system, and an improved sealing system, eliminating sealing washers for even better reliability. Designed to…

Fills and pours automatically, rapidly. One head for all capacities, all volumes. Short tipping angle, interchangeable volumetric bulbs give reproducable volumes. Bulb joint is 14/20, head and flask 29/42. Complete apparatus consists of head, flask, volumetric bulb, clip, two 19mm (3/4-in) springs,…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

…seripettor® pro is a bottletop dispenser designed to handle a wider range of liquids than the regular seripettor® for customers who do not require all of the features of the Dispensette®. Like the regular seripettor®, it features an easily-replaceable wiping seal dispensing cartridge, making it…

…Its pulse-free dispensing technique allows the desired volumes to be dispensed continuously, thus making titration simpler and safer, with precision values well within required limits. The volume is dispensed by simply rotating the wheels: Model M features a dispensing rate of 2,500 µl…

…from displayed table set dispense volume set dispense flow rate Easy to read bright, backlight display Dispense volume displayed and has automatic shutoff at completion Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size Last…

…and total dispensed volume User configurable multi-step operation Dispenses in forward or reverse direction Adjustable flow rate while pump is running Stackable sealed remote pump drive with ip 32 rating Selectable tubing table Automatic tubing break-in Automatic calibration…

The Automatic Sanitizer Dispenser is a touch-less, battery-operated hand sanitizer dispenser that can be mounted on a wall (wall-mounting tools and drip tray included). It has a 1200mL universal, refillable reservoir that works with most Liquid/Gel Hand Sanitizers. The station is ADA Compliant…

…dispensing, or single volume positive displacement pipetting, with the ability to save favorites.  The HandyStep® touch S adds advanced features like multi-aspiriation, multi-dispensing, and titration. Both models automatically recognize the size of BRAND® PD-Tip™ II dispenser…

…liquid can be dispensed up to 100 times without refilling the tip. An Eppendorf Combitip advanced, in the required size, is simply attached and automatically recognized via a sensor in the Repeater M4. The volume is set using the selection dial and is automatically shown in the display.…

…dispensing, or single volume positive displacement pipetting, with the ability to save favorites.  The HandyStep® touch S adds advanced features like multi-aspiriation, multi-dispensing, and titration. Both models automatically recognize the size of BRAND® PD-Tip™ II dispenser…

…laboratories. It precisely dispenses a wide variety of liquids. Optional accessories, such as the flexible discharge tube, are available to increase productivity and convenience. Low Cost Reliable Dispensing Popular as a buffer dispenser, the seripettor precisely dispenses measured volumes…

…delivery in speed ranges from 0.2 to 100 revolutions per minute rotarus® volume 50 is a comfortable, precise dispensing pump with control options for velocity, flow rate, dispensing duration and total volume. Variable cycles and graduated pump speeds can be controlled reliably and precisely.…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

…edge and/or grid, respectively. Sterile membranes are individually, packaged and are optionally available in pleated bands for use in filter dispensers such as the Microsart® e.motion. High Flow membranes provide 30% higher flow rates than standard 0.45µm filters. Features Detection and…

…dispense volumes accessed using the scroll wheel. Access to a variety of Wizards that simplify the process Guided Pipetting — Used for frequently executed protocols to ensure consistency from run to run. Preprogrammed pipetting steps ensure reproducibility Automatic…

An economical way to dispense automatically diluted solutions into spray bottles, buckets or other containers at the touch of a button. Control dilution accurately for one product.

Automatic Slide Dispenser holds approximately 50 standard 3” x 1” (76 x 26mm) slides in transparent, dust-free container. By turning either side knob, the slides are ejected one at a time. Dimensions: 4 1/4” x 5” x 5 1/2” high

…up to 10-5 with increased accuracy. It is a very user-friendly tool: one button touch for the routine serial dilutions and automatic plating. It then enables automatic standardized plating of 30 to 1 trillion countable CFU/mL on 1 single Petri dish. Discover the amazing patented circle mode,…

…from displayed table set dispense volume set dispense flow rate Easy to read bright, backlight display Dispense volume displayed and has automatic shutoff at completion Volume and flow rate units (µl/hr or ml/hr) are selected automatically based on syringe size Last…