Autoclave Bags

Compare Tool

Select up to 3 products

Autoclave Bags
1 - 32 of 257
Sort
View
Show


  • …membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri dishes respectively. Steam autoclavable at 135º C (275º F). 100 per box. Bags made of polypropylene, 05 mm (.002") thick. Transparent, autoclave bags

  • Autoclave Bags

    Heathrow Scientific

    Clear bags imprinted with blue biohazard labeling designed for safe disposal. Constructed of 2.0-mil thick polypropylene, allowing for repeated autoclaving. Strong side seams for securely holding items. Front write-on panel. Autoclavable at 250°F (121°C). 4 inner packs of 50 bags, sold as a…

  • …the use of autoclaves. Such sterile waste is then allowed in a landfill. The bags must clearly show that the bag of hazardous material has been autoclaved. Tufpak accomplishes this at no added cost by imprinting a message of compliance, which is not readable until proper autoclaving has been…

  • …Cradle To Grave requirements 40 CFR 262. All Biohazard bags have a Temperature Indicator Patch that actually spells out “CONTENTS HAVE BEEN AUTOCLAVED” after exposure to wet steam heat and autoclave pressure to visually show bag has been processed. Compliant with California Health…

  • Autoclave Bags, Red

    Action Health

    autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read "AUTOCLAVED"

  • …Standard BA6041 & BA6141 Stomacher® Bags, Seward Bag Clips allow fast and easy securing of the Stomacher® bags. Eliminates any leakage during storage or incubation Provides a reusable alternative to closure bags Easily cleaned with most lab disinfectants (not autoclavable)

  • Autoclave Indicator Tapes

    Globe Scientific

    This adhesive tape is used to seal autoclave bags and pouches and changes color when the contents have passed through a sterilization cycle. Each roll is 165 feet (50m) long. 1181C23 is used when using autoclave sterilization (20 ft. at +121°C, 10 ft. at +125°C and 5 ft. at…

  • …biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture plates and pipettes.

  • Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

  • …reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements. The ultra-clear polypropylene won't hinder spectrophotometer reading. These microcentrifuge tubes are offered in resealable, tamper evident self-standing bags. Features:…

  • O.K.® Sterilizer Bags

    Propper Manufacturing

    …or user error. Propper recommends O.K.® Sterilizer Bags for use within wrapped sets or containment devices as a better alternative to paper-plastic pouches. All-paper bags due to steam penetration through all sides of the bag allow for adequate air removal, steam contact, and drying. For…

  • Autoclavable Bags

    Corning® Gosselin™

    The safe way to autoclave your contaminated products Wide range of volumes Each bag is 40 µm thick

  • Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch darkens…

  • Disposal Bags

    Greiner Bio-One

    Ideal for the hygienic disposal of contaminated laboratory items Made of polypropylene foil for sterilisation in the steam autoclave

  • Autoclavable Biohazardous Waste Bags

    Medegen Medical Products

    HDPE Film w/ Indicator, Flat Pack, Twist Ties.

  • …desktop laser printers. The plastic waterproof labels are specifically designed to permanently adhere to vials, glass tubes, freezer boxes, plastic bags and other containers that will undergo long-term deep-freeze storage. The cryogenic labels are ideal for long term storage and biopreservation…

  • Standard Pipette Tips

    Globe Scientific

    …in bags, racks and reloading stacks Bags Each bag features a tamper-evident seal and is recloseable to keep out dust and particles All bags are self-standing and provide easy access and convenience. This special design helps to prevent bulk tips from spilling out of the bag when…

  • These 500uL (0.5mL) Beckman® Type microcentrifuge tubes with attached cap are non-graduated. The tubes are made from polyethylene and are not autoclavable. The tubes are sold in bags of 1000.

  • Autoclave Bags

    Bioscience International

    Indicator strip confirms sterilization Autoclavable to 160°C Indicator strip turns black after correct steam processing Suitable for sterilization of pathogenic material The bags have been developed to meet all various laboratory demands concerning capacity and…

  • Abdos Autoclave Bags

    Foxx Life Sciences

    Transparent Autoclave bags are made of two-millimeter-thick Polypropylene (PP) and are used for steam cleaning used petri dishes, membrane filters, cell culture flasks, pipettes, culture plates and other autoclavable products.

  • Autoclavable Biohazardous Waste Bags

    Medegen Medical Products

    Polypropylene Film w/ Indicator, Flat Pack, Twist Ties.

  • …red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C (275°F)…

  • Autoclavable bags have one long flap to facilitate easy opening. When picking up individual pieces of waste that need to be discarded, the bag is turned inside out, over the hand, then turned right side out with waste safely inside the bag. Measures 22 x 28cm (8 1/2 x 11"). 100 per pack. …

  • Autoclaving bags for MBS I funnels Autoclaving bags for MBS I funnels

  • …temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard autoclave

  • Biohazard Disposal Bags

    Heathrow Scientific

    bags printed with biohazard warning symbol and precautions in English, Spanish, and French Polypropylene Thickness: 1.57 mil Includes an indicator patch that darkens when autoclaved Autoclavable to 250°F (121°C) Disposable Epoxy coated steel wire holder available for bags

  • …polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get Eclipse™ tips in resealable zip style bags, in Eclipse™…

  • …irradiation, packaged in its own protective bag with a polypropylene, 38 mm, dual purpose cap. The cap works both as a leak-proof closure and a vented closure with a PTFE membrane, 0.22 um pore size for sterile air exchange. The polycarbonate is autoclavable which makes for repeated reuse of…

  • Fits Eppendorf™, Benchmate, Labpette (10µl)

  • …indicator area that changes color after autoclaving, for foolproof verification of sterility. Bags are clearly marked with biohazard symbols and includes a large white marking area for custom identification. BowTie™ Bags are made of HDPE and are suitable for autoclaving at 121°C cycles.

  • Self-sealing edges, need no additional closing devices Bags are constructed of paper Have a useable size of 10" x 2.5" x 1.5" for instruments.

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.