Autoclavable Polypropylene Bags

Compare Tool

Select up to 3 products

Autoclavable Polypropylene Bags
1 - 32 of 143

Crystal Technologies

  • bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri dishes respectively. Steam autoclavable at 135º C (275º F). 100 per box. Bags made of polypropylene,

  • Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

  • …convenient biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture plates and…

  • Autoclavable Biohazardous Waste Bags

    Medegen Medical Products

    Polypropylene Film w/ Indicator, Flat Pack, Twist Ties.

  • …the use of autoclaves. Such sterile waste is then allowed in a landfill. The bags must clearly show that the bag of hazardous material has been autoclaved. Tufpak accomplishes this at no added cost by imprinting a message of compliance, which is not readable until proper autoclaving has been…

  • …reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements. The ultra-clear polypropylene won't hinder spectrophotometer reading. These microcentrifuge tubes are offered in resealable, tamper evident self-standing bags. Features:…

  • Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch darkens…

  • Autoclave Bags

    Heathrow Scientific

    Clear bags imprinted with blue biohazard labeling designed for safe disposal. Constructed of 2.0-mil thick polypropylene, allowing for repeated autoclaving. Strong side seams for securely holding items. Front write-on panel. Autoclavable at 250°F (121°C). 4 inner packs of 50 bags, sold as a…

  • Abdos Autoclave Bags

    Foxx Life Sciences

    Transparent Autoclave bags are made of two-millimeter-thick Polypropylene (PP) and are used for steam cleaning used petri dishes, membrane filters, cell culture flasks, pipettes, culture plates and other autoclavable products.

  • …temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard autoclave

  • Disposal Bags

    Greiner Bio-One

    Ideal for the hygienic disposal of contaminated laboratory items Made of polypropylene foil for sterilisation in the steam autoclave

  • Bright red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C…

  • Biohazard Disposal Bags

    Heathrow Scientific

    bags printed with biohazard warning symbol and precautions in English, Spanish, and French Polypropylene Thickness: 1.57 mil Includes an indicator patch that darkens when autoclaved Autoclavable to 250°F (121°C) Disposable Epoxy coated steel wire holder available for bags

  • Autoclave Bags, Red

    Action Health

    Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read…

  • Polypropylene Utility Trays

    Thermo Scientific Nalgene

    Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

  • Cell Spreaders, Polypropylene

    Argos Technologies

    …L-shape allows application on the entire petri dish or plate surface. Smooth spreading surface with slight upward return reduces the risk of damaging agar sample. Spreaders are manufactured of polypropylene and pre-sterilized, eliminating the need for flaming or autoclaving. Packaged in bags of 10.

  • …BetaWipe™ is ideal for cleaning sensitive surfaces Features • Polypropylene and cellulose composite • High fabric loft • Unique thermally bonded composite construction • Autoclavable • Solvent-safe Bag-Within-A-Bag cleanroom packaging • Statistical…

  • …holds a polyethylene bag 22 x 28cm (8-1/2 x 11");  coated in easy to clean, durable, orange color epoxy Snug fitting polypropylene plastic cover helps hold the bag securely in place Reusable; can be cleaned by hand or in automated dish washers; autoclavable. Cover provides…

  • Cap Opener for 0.5, 0.65, 1.5, 1.7 and 2.0mL snap cap microcentrifuge tubes. Autoclavable (122°C) Polypropylene. 5 per bag/10 bags per case Made in USA

  • Tips And Reservoirs

    DWK Life Sciences (Wheaton)

    … Packed in an autoclavable box in an 8 x 12 row configuration 7730G50 are 5-200 mL virgin polypropylene tips, free from trace metals. 77730G60 Tips are the same as 7730G50, but are bulk-packed in bags of 1,000. Of virgin polypropylene Autoclavable Permit maximum recovery…

  • …caps are autoclavable. Tubes can be centrifuged to 20,000 RCF. Screw cap tubes for SuperClear® microcentrifuge tubes With ethylene propylene O-ring Endotoxin Free (non-pyrogenic) Polyethylene USP Class VI resin Polypropylene Autoclavable 500 per bag/10 bags per case …

  • Standard Pipette Tips

    Globe Scientific

    …Produced from medical grade virgin polypropylene (PP) All tips are graduated for accurate measurements Universal fit design provides an airtight fit on most brands of pipettors Available in bags, racks and reloading stacks Bags Each bag features a tamper-evident seal and…

  • …application. Excellent for frozen storage or when working with hazardous or valuable materials. Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes can be centrifuged to 20,000 RCF. Available in 0.5mL, 1.5mL, and 2.0ml sizes in both conical and freestanding…

  • Low Retention Pipette Tips

    Globe Scientific

    …DNase,RNase, Pyrogens and PCR Inhibitors Available non-sterile in bags, and sterile in racks and reloading stacks Bags Each bag features a tamper-evident seal and is recloseable to keep out dust and particles All bags are self-standing and provide easy access and convenience.…

  • 12 Channel Reagent Reservoirs

    Lee Plastic Company

    …for complete sample withdrawal Reservoir has tabs on the bottom to ensure secure stackability and is supplied with a fitted lid The rigid design of this product assures consistency in an automated environment Made from polypropylene, and is autoclavable Packaged 10 per bag, nonsterile

  • …closes automatically and securely for a more sanitary environment Holds a 25 x 25cm (10x10") autoclavable biohazard disposal bag (F13166-0000 or H13182-1010) Includes a polypropylene liner with handle for easy emptying of contents Aesthetic and durable; stainless steel body and chrome…

  • …is necessary. Unibody polypropylene construction enables autoclaving if desired. Manufactured from polypropylene Overall length is 15 cm Tip length is 5.5 cm Tip sides taper from 0.3 cm to 0.9 cm wide Maximum jaw opening is 4.5 cm Non-sterilized Packed 100 pieces per bag

  • …are made of polypropylene and are autoclavable repeatedly. They have sturdy latch hinges that won't come apart like lesser quality tip racks and a special snap lock designed so that it will not catch on your gloves. You can also get Eclipse™ tips in resealable zip style bags, in refills…

  • Filter Pipette Tips

    Globe Scientific

    …sterile in racks Bags Each bag features a tamper-evident seal and is recloseable to keep out dust and particles All bags are self-standing and provide easy access and convenience. This special design helps to prevent bulk tips from spilling out of the bag when left on the bench…

  • …chemical-resistant polypropylene construction can be used with single, 8 and 12 channel pipettors. A wide profile provides added stability and measures 5" L x 2.25" W. Autoclavable at 121°C (250°F). Individually sealed and sterilized (8 per bag, 6 bags per case). V-Shaped…

  • … Includes side graduations, and frosted writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin High centrifuging to 20,000 x G Freezable to -80C Autoclavable Capacity: 1.7 mL 500 per resealable bag, 10 bags per case Made in USA

  • …frosted writing surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin High centrifuging to 35,000 x G Freezable to -80°C Autoclavable Natural color Capacity: 0.5 mL 1000 per resealable bag, 10 bags per case Made in USA

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.