Autoclavable Polypropylene Bags

Compare Tool

Select up to 3 products

Autoclavable Polypropylene Bags
1 - 32 of 65
Sort
View
Show
  • Clavies® Autoclavable Bags

    Bel-Art Products

    bag is filled with used labware such as petri dishes, membrane filters, culture plates, pipettes, etc., then autoclaved and discarded. The three largest sizes hold 65, 200 and 240 standard petri dishes respectively. Steam autoclavable at 135º C (275º F). 100 per box. Bags made of polypropylene,

  • Autoclavable Specimen Bags

    Dynalon

    Disposable, polypropylene bags, 1.5 mil thick Translucent bags also usable for storing Sold in packs of 100. Available in ten sizes. Sizes given in listings below.

  • Clavies® Autoclavable Bags

    Bel-Art Products

    …convenient biohazard disposal 0.05 mm, 2 mil polypropylene Autoclavable at 121°C Transparent For maximum protection and convenience when disposing of biohazardous waste. Three sizes hold 65, 200 or 240 standard petri dishes. Ideal for autoclaving discarded membrane filters, culture plates and…

  • Autoclavable Biohazardous Waste Bags

    Medegen Medical Products

    Polypropylene Film w/ Indicator, Flat Pack, Twist Ties.

  • Scienceware® Autoclave Bags

    Bel-Art Products

    Economical solution for autoclaving and safe disposal of biohazard wastes. Transparent polypropylene; 0.03mm (1.5 mil) thick Pass ASTM 1709 Dart Impact and ASTM 1922 Tear Resistance Tests High temperature autoclavable at a maximum of 135°C (275°F) Sterilization patch darkens…

  • Microcentrifuge Tubes in Self-Standing Bags

    Globe Scientific

    …reagents and can be autoclaved at 121°C. Each tube is molded with precise graduation marks for accurate measurements. The ultra-clear polypropylene won't hinder spectrophotometer reading. These microcentrifuge tubes are offered in resealable, tamper evident self-standing bags. Features:…

  • Autoclave Bags

    Heathrow

    Clear bags imprinted with blue biohazard labeling designed for safe disposal. Constructed of 2.0-mil thick polypropylene, allowing for repeated autoclaving. Strong side seams for securely holding items. Front write-on panel. Autoclavable at 250°F (121°C). 4 inner packs of 50 bags, sold as a…

  • Autoclavable Biohazard Bags, 2mil

    TufPak

    …the use of autoclaves. Such sterile waste is then allowed in a landfill. The bags must clearly show that the bag of hazardous material has been autoclaved. Tufpak accomplishes this at no added cost by imprinting a message of compliance, which is not readable until proper autoclaving has been…

  • Autoclave & Biohazard Bags

    MTC Bio

    …temperature autoclavable bags are manufactured from heavy gauge polypropylene material that is not only more puncture-resistant than polyethylene, but also withstands autoclaving at temperatures up to 136°C (250°F). Their ability to contain is completely unaffected at standard autoclave

  • Biohazard Bags

    Propper Manufacturing

    Orange biohazard bags are suitable for the decontamination and disposal of laboratory waste. The color scheme readily identifies the contents to all hospital personnel.  Made of super strength polypropylene, t he Propper bags are capable of withstanding autoclave temperatures as high as…

  • Disposal Bags

    Greiner Bio-One

    Ideal for the hygienic disposal of contaminated laboratory items Made of polypropylene foil for sterilisation in the steam autoclave

  • Scienceware® Biohazard Disposal Bags with Indicator

    Bel-Art Products

    Bright red polypropylene bags include black biohazard symbol and precautionary procedures printed in four languages (English, Spanish, French, German) for added safety. Sterilization patch darkens when subjected to steam sterilization Hgh temperature steam autoclavable to 135°C…

  • Biohazard Disposal Bags

    Heathrow

    bags printed with biohazard warning symbol and precautions in English, Spanish, and French Polypropylene Thickness: 1.57 mil Includes an indicator patch that darkens when autoclaved Autoclavable to 250°F (121°C) Disposable Epoxy coated steel wire holder available for bags

  • Autoclave Bags, Red

    Action Health

    Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read…

  • Autoclave Bags, Clear

    Action Health

    Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275F (135C). Imprinted with the standard biohazard symbol. Welded seams increase durability and protection. Bags feature an indicator that changes to read…

  • Standard Pipette Tips

    Globe Scientific

    …Produced from medical grade virgin polypropylene (PP) All tips are graduated for accurate measurements Universal fit design provides an airtight fit on most brands of pipettors Available in bags, racks and reloading stacks Bags Each bag features a tamper-evident seal and…

  • Autoclave Bags, Orange

    Action Health

    Econo-Guard polypropylene autoclave bags are ideal for processing hazardous materials. Polypropylene bags can withstand higher temperatures of 275°F (135°C) Imprinted with the standard biohazard symbol Welded seams increase durability and protection Bags feature an indicator…

  • Low Retention Pipette Tips

    Globe Scientific

    …DNase,RNase, Pyrogens and PCR Inhibitors Available non-sterile in bags, and sterile in racks and reloading stacks Bags Each bag features a tamper-evident seal and is recloseable to keep out dust and particles All bags are self-standing and provide easy access and convenience.…

  • Filter Pipette Tips

    Globe Scientific

    …sterile in racks Bags Each bag features a tamper-evident seal and is recloseable to keep out dust and particles All bags are self-standing and provide easy access and convenience. This special design helps to prevent bulk tips from spilling out of the bag when left on the bench…

  • Cell Spreaders, Polypropylene

    Argos Technologies

    …L-shape allows application on the entire petri dish or plate surface. Smooth spreading surface with slight upward return reduces the risk of damaging agar sample. Spreaders are manufactured of polypropylene and pre-sterilized, eliminating the need for flaming or autoclaving. Packaged in bags of 10.

  • Polypropylene Utility Trays

    Thermo Scientific Nalgene

    Used to carry test tube racks, blood bags, saline bags, etc. Autoclavable Excellent for use in clean room environment where everything needs to be sterilized Molded-in center division with handle; overall L 14 7/8” x W 9 1/2” x H 4 1/2”. Meets OSHA Standard 29 CFR Part…

  • 1.5mL SuperSpin™ Polypropylene Microcentrifuge Tubes

    …in 1.5mL sizes that fit all standard and high capacity rotors. Tubes have flat pierceable caps and a side writing surface. Autoclavable and freezeable. In resealable bags. Graduated. The ability to extract DNA from samples and then amplify that DNA with reliable results is an important part of…

  • Scienceware® Poxygrid® Bench-Top Biohazard Bag Holder Kit

    Bel-Art Products

    …holds a polyethylene bag 22 x 28cm (8-1/2 x 11");  coated in easy to clean, durable, orange color epoxy Snug fitting polypropylene plastic cover helps hold the bag securely in place Reusable; can be cleaned by hand or in automated dish washers; autoclavable. Cover provides…

  • Locking Centrifuge Tubes

    Globe Scientific

    …medical grade polypropylene Certified – Manufactured in a class 100,000 clean room and are certfied to be free from RNase and DNase, Human DNA, Pyrogens, PCR Inhibitors, and ATP Ease of Use – Tubes feature graduations, writing area, pierceable cap, are autoclavable, and are…

  • Tips And Reservoirs

    DWK Life Sciences (Wheaton)

    … Packed in an autoclavable box in an 8 x 12 row configuration 7730G50 are 5-200 mL virgin polypropylene tips, free from trace metals. 77730G60 Tips are the same as 7730G50, but are bulk-packed in bags of 1,000. Of virgin polypropylene Autoclavable Permit maximum recovery…

  • 12 Channel Reagent Reservoirs

    Lee Plastic Company

    …for complete sample withdrawal Reservoir has tabs on the bottom to ensure secure stackability and is supplied with a fitted lid The rigid design of this product assures consistency in an automated environment Made from polypropylene, and is autoclavable Packaged 10 per bag, nonsterile

  • Benchtop Biohazard Disposal Can with Motion Sensor Lid

    Bel-Art Products

    …free use; closes automatically and securely for a more sanitary environment Holds a 25 x 25cm (10 x 10") autoclavable biohazard disposal bag (H13182-0000) Includes a polypropylene liner with handle for easy emptying of contents Aesthetic and durable; stainless steel body and chrome lid…

  • Reservoir, Reagent, 12 Channel

    Bel-Art Products

    …chemical-resistant polypropylene construction can be used with single, 8 and 12 channel pipettors. A wide profile provides added stability and measures 5" L x 2.25" W. Autoclavable at 121°C (250°F). Individually sealed and sterilized (8 per bag, 6 bags per case). V-Shaped…

  • FoilPAK Pouch

    Ampac Flexibles

    Foil & Polypropylene Three-Side-Seal Barrier Pouch Ampac's FoilPAK is a 3ply laminated structure consisting of polyester, foil and polypropylene (PET/Foil/PP). Foil pouches are ideal for light sensitive objects requiring a nontransparent packaging solution. These pouches provide the…

  • Costar® 0.65 mL Snap Cap Microcentrifuge Tubes, Rainbow Colors

    Corning

    …Costar® 0.65mL microcentrifuge tubes are made of colored polypropylene and are certified RNase-/DNase-free. Rainbow pack includes one bag each of blue, green, yellow, red and orange tubes. Supplied nonsterile and are autoclavable. External graduations and frosted writing spot for easy sample…

  • Clips for Beakers and Pitchers

    Bel-Art Products

    Autoclavable 0209X21: Dialysis Bag Clip Holders Suspend dialysis bags in large beakers or pitchers up to 0.63cm (1/4") thick with these strong clips. Bags slide easily into the slot and then the holder can be clipped onto the container’s edge Smooth polypropylene

  • OctaPool™Solution Reservoirs, 25ml disposable, sterile, five per bag, Qty: 200

    OctaPool™

    …a removable hinged lid to reduce contamination and store solutions without refilling. The large (100ml) size and small (50ml and 25ml) sizes are thin walled polystyrene and are meant to be disposable. The large (175ml) size is thin walled polypropylene and may be subjected to a few autoclavings.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.