Autoclavable Plastic Tubes

Compare Tool

Select up to 3 products

Autoclavable Plastic Tubes
1 - 32 of 136
Sort
View
Show
  • …up to 30,000 x g prevents sample loss due to tube breakage and provides extra safety when working with hazardous samples Manufactured without the use of slip agents, plasticizers, and biocides – substances that have been shown to leach from plastic consumables into the sample and negatively…

  • Thistle Tubes

    Bel-Art - SP Scienceware

    Make additions to burettes and narrow neck containers easily with this flared top thistle tube. Polypropylene plastic; chemical resistant, unbreakable, safe Steam autoclavable at 121°C (250°F) Dimensions: 27mm (1-1/16") I.D. top with a 41mm (1-5/8") O.D. flare …

  • 2602F40 is translucent Usable to 50,000 x g in refrigerated or non-refrigerated centrifuges *2610D22 and D30 with lip

  • …odorless, non-cytotoxic and non-hemolytic Contains no phthalate plasticizers or peroxides that can leach out into transported fluid Low binding suface to minimize absorption of proteins and food products Autoclavable; also can be sterilized by gamma radiation, EtO and chemical procedures…

  • …Conical microcentrifuge tubes are made from a crystal clear resin that allows users to easily view samples. Polypropylene tubes are suitable for vapor phase liquid nitrogen storage, boiling and autoclaving. External ribs on the free standing tubes position and lock the tubes into place in racks…

  • 15 mL Centrifuge Test Tubes

    Globe Scientific

    …solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 17 x 120mm (15mL capacity) test tube with conical bottom, graduated.…

  • KIMAX Test Tubes With Marking Spot

    DWK Life Sciences (Kimble)

    With marking spot and deep form, black phenolic plastic caps with cemented rubber liners Caps are autoclavable; see 9210R18 series for conditions (unattached) Listings indicate tube length x o.d. in mm

  • …for Plastic Centrifuge Tubes from the centrifuge with a convenient pull tab. These autoclavable closures are designed to fit Nalgene™ round and conical centrifuge tubes. They may not be liquid-tight during high-speed centrifugation. 2602C55 stoppers fit non-lipped 50mL centrifuge tubes

  • Globe Scientific's plastic culture tubes are produced in polystyrene (PS) or polypropylene (PP). The polystyrene tubes can withstand 1500 RPM during centrifugation. polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Tubes with dual position snap caps (LDPE)…

  • PCR Tubes

    BrandTech®

    … These PCR tubes have thin, uniform walls to ensure consistent, precise thermal transfer for excellent results. BRAND PCR tubes are autoclavable and RNase-, DNase-, and DNA-free. BRAND PCR tubes are compatible with most thermal cyclers. BRAND PCR tubes are supplied with…

  • Microtiter tube systems are available pre-racked in an 8 x 12 format and can be autoclaved, sealed and frozen for storage. Tubes offer additional volume capacity for sample dilution and/or mixing prior to a range of procedures including HTLV-III testing, RIA, EIA, PCR, pharmaceutical quality…

  • Autoclavable Graduated Non-sterile Certified RNase and DNase free Frosted writing area on tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to…

  • … External graduations and frosted writing spot for easy sample identification Flat cap surface for convenient labeling Withstands maximum RCF of 17,000 x g Costar microcentrifuge tubes are certified RNase-/DNase-free and are autoclavable. The tubes are made of polypropylene.

  • 180 Clear Plastic PVC Tubing

    Thermo Scientific Nalgene

    …and special plasticizers, this tubing is available in 50, 100, 250 and 500' cases. Meets Food Additives Amendment of the Federal Food, Drug, and Cosmetic Act; also USDA and U.S. Pharmacopeia Class VI requirements for plastic materials. Lab-grade, autoclavable clear tubing sets the…

  • …PerformR® Tubes. No recycled plastics or commodity grade resins. PerformR® Centrifuge Tubes are autoclavable with a standard 122°C plasticware process for 15 minutes. PerformR® tubes are printed using UV fixed inks that won't rub off like screen printed tubes from other…

  • Perfect for 50mL Centrifuge Tubes. Dimensions: 300 x 112 x 85mm Racks are shipped flat for easy storage Easy to assemble: simply fold and snap together securely Racks are Autoclavable at 121°C for 20 minutes Can be used dry, wet or in water baths and will not float …

  • …in natural and five additional colors. All Microcentrifuge tubes are certified RNase/DNase-Free, Human DNA/PCR Inhibitor-Free, and non-pyrogenic. Superior Clarity RCF rating of 24,000 x g Temperature rating from -80°C to +121°C Fit all standard rotors Autoclavable

  • Multi-Purpose Test Tubes

    Stockwell Scientific

    …the tubes are plastic (polystyrene, polypropylene or polypropylene-copolymer), thus preventing the problem of broken glass. Polypropylene is chemically resistant, autoclavable and virtually unbreakable. Polystyrene is clear like glass. Note that caps are ordered separately. These tubes

  • …characteristics are ensured by a flat top plastic screw cap with an inner sealing lip. Tubes are made of translucent polypropylene or optically clear polystyrene with molded graduations from 2.5 to 50 ml. Polypropylene tubes can be autoclaved and will resist temperatures up to 121 °C;…

  • Scienceware® Vacuum Aspirator Bottle

    Bel-Art - SP Scienceware

    …source from accidental fluid backflow. A flexible collection tube reaches from the bottle and accepts disposable 1 mL pipet tips, glass Pasteur or 2 mL pipets for work with Petri dishes, microtiter plates, flasks and centrifugal tubes. The small footprint of the epoxy coated steel wire cage supports…

  • …surface on the side of the tube. G-Tubes are made of a tough, transparent and specially formulated polypropylene for better sample viewing and overall strength. These tubes are designed with thicker walls to withstand extreme stress, high spinning speeds, autoclaving, boiling, freezing and…

  • … Specialty microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open.  Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes and are freezable to -80°C. Low-Density Polyethylene (LDPE) tubes are non-autoclavable. LDPE is…

  • Pre-cut, peel-off, labels sized to fit microcentrifuge tubes Tubes with tags slide easily in and out of rotors Chemically inert polyester Will not dry up or fall off Easy to write on Smear resistant Microcentrifuge Tube Tough-Tags withstand steam-autoclaving, boiling…

  • Abdos Plastic Test Tube

    Foxx Life Sciences

    …the blood) without the need to use a bioassay. Polystyrene (PS) tubes are transparent and can withstand 1400 RCF during centrifugation, and are suitable for mild bases, weak acids but not organic solvents. Abdos Plastic Test Tube Cap (13MM). These hydrophobic caps are made of high-quality,…

  • Detachable autoclavable plastic sidearm designed to accept 5/16" ID flexible tubing (US Patent 3,268,300) Sidearm has two ears to provide a finger grip for easy insertion into a neoprene grommet by turning the plastic piece Opening in the sidearm is larger at the flask end to hold a…

  • …for autoclaving. Designed for easy-on, easy-off use, due to the exclusive Dual Thumb Tab. Cap removal is simple and quick. VACUCAP™ closure is ideal for recapping most 13 mm and 16mm O.D. evacuated glass blood collection tubes. 13 mm style can also be used on most 12 mm plastic test tubes.

  • …“pop-up” tubes or “floaters”, while pressing the legs of the rack on the bench will raise tubes and allow for easy removal Made of durable, corrosion resistant white polypropylene plastic End handles allow easy transport and stacking Steam autoclavable at 121°C…

  • No-Wire Test Tube Grip Racks

    Bel-Art - SP Scienceware

    …lettered rows for tube identification • Fold up sides lock firmly into the grip decks; assembly takes only seconds • Unloaded racks are stackable • Tube size indicated is for grip function; smaller tubes may fit for storage purposes • Steam autoclavable at 121ºC…

  • …lightweight cordless pipetting controller, which allows aspiration from bottles and tubes without the arm and hand elevations required with serological or volumetric pipettes. It fits all commonly used glass or plastic pipettes, but can also be used with Sartorius 5 ml and 10 ml disposable tips. The…

  • …the flat surface closure and the side of the tube for convenient sample identification. Features a positive click closure so you know the lid is securely in place and fully closed. Tube interior is highly polished for maximum sample recovery. Non wetting polypropylene. Autoclavable at 121°C.

  • Microcentrifuge Tubes and Racks

    United Scientific Supplies

    Clear plastic micro centrifuge tubes with attached thumb caps. Tubes are graduated and autoclavable. Racks are made of polypropylene and feature removable lids.

  • tubing for laboratory applications Outstanding chemical resistance; non-oxidizing and non-contaminating Lot-to-lot consistency for reproducible results Smooth, polished inner wall The Only Choice for Phthalate-free Tubing Contains no phthalate or BPA Non-DEHP bio-based plasticizer

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.