Autoclavable Caps

Compare Tool

Select up to 3 products

Autoclavable Caps
1 - 32 of 585
Sort
View
Show
  • …Screw Caps are low profile caps fitted with ethylene propylene sealing o-rings. Screw Cap II is manufactured from polypropylene and fitted with a silicon o-ring. Tether (loop) Caps are low profile caps with a molded tether and a ethylene/propylene sealing o-ring. Tether (loop) Cap II…

  • Black Phenolic Screw Caps

    DWK Life Sciences (Wheaton)

    These autoclavable caps are designed to ensure the ultimate in product safety. The liners are white styrene-butadiene faced with Teflon.

  • Cryogenic Vials and Caps

    NEST Scientific USA

    …Manufactured in clean room Autoclave at 121? /15 Ib Clear graduations and white marking area Sterilized by E-Beam Non-pyrogenic, DNase/RNase free External -Thread Cryogenic Vials Used for storage in the gas phase of liquid nitrogen. Special screw cap designed without silicone…

  • Caps

    TriForest

    cap is an ingenious combination of our TriForest septum Cap and vented DuoCAPs™. It provides an additional layer of protection to the standard septum caps. Port Cap Kit (3-Port and 4-Port) Given the multiple port needs of our customers, we have designed the port cap in autoclavable

  • Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance to moisture vapor. The closures provide consistent adherence to close dimensional tolerance.

  • White Polypropylene Screw Caps

    DWK Life Sciences (Wheaton)

    Bonded Teflon®-faced silicone liners White, autoclavable caps have a bonded Teflon-Faced Silicone Liner making them suitable for storage and containment of volatile solvents, sensitive compounds and corrosive chemicals.  The liners consist of 0.055” of Silicone and 0.005”…

  • These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

  • Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance to moisture vapor. The closures provide consistent adherence to close dimensional tolerance.

  • Black Phenolic Screw Caps

    DWK Life Sciences (Wheaton)

    Tefon®-faced (14B) rubber liners Autoclavable caps are designed to ensure the ultimate in product safety. The liners are made of a nontoxic white styrene-butadiene rubber and are faced with Teflon® which offers excellent chemical resistance. They are available in convenient lab pack quantities as…

  • Polypropylene Open-Top Screw Caps

    DWK Life Sciences (Wheaton)

    Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…

  • Diamond Culture Tube Caps

    Globe Scientific

    …The caps are molded from durable, autoclavable polypropylene (PP). They are available in a full range of five sizes and five colors for easy sample identification and organization. Recommended tube diameter is indicated on each cap. Polypropylene (PP) Autoclavable Ridges inside cap

  • …(PP) Cap: High Density Polyethylene (HDPE) Technical Information: - Sterile tubes are Rnase/Dnase free, non-pyrogenic and non-cytotoxic. - Autoclavable (without screwcap). - Spin rate: 5,000 rpm (6,160 x g) Temperature Range: Tube: -196°C to +121°C Cap: -50°C…

  • Black Phenolic Rubber Lined Caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance to moisture vapor. The closures provide consistent adherence to close dimensional tolerance.

  • …Screw Cap Microcentrifuge Tube Caps feature o-rings to form a secure seal. Optimized for secure short term storage in low temperatures, these autoclavable screw caps are available in a variety of colors, and adapt to your scientific experiments.  Screw Cap Microcentrifuge Tube Caps Design…

  • Teflon Squeeze-Type Wash Bottles

    Thermo Scientific Nalgene

    Leakproof closure Made of transparent Teflon® FEP with one-piece stem and closure of Tefzel® ETFE Usable for trace metal work; autoclavable Sizes 125/250 mL = cap No. 24; 500/1,000 mL = cap No. 38

  • Black Plastic Caps

    MilliporeSigma

    These autoclavable caps are designed to ensure the ultimate in product safety.

  • Posi-Click™ Small Cap Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    …identification Small cap allows tubes to be spaced closely together in racks and storage boxes Frosted Cap and writing panel allows for an extra writing room and is resistant to smearing. Ultra-clear resin makes visualizing samples easy. Rated to 20,000xG Autoclavable Certified…

  • Posi-Click™ Microcentrifuge Tubes Without Caps

    labForce (a Thomas Scientific Brand)

    …samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear resin makes visualizing samples easy. Rated to 20,000xG Autoclavable Certified…

  • Posi-Click™ 1.7 mL Large Cap Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    1.7mL Posi-Click™ Graduated Microcentrifuge tubes feature a large easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Frosted Large Cap and writing panel allows for an extra writing room and is resistant to smearing. Boilproof…

  • …of the cap to rotate independently preventing tubes from tangling when caps are removed or attached. Caps are constructed of PTFE body and PP collar* and are autoclavable. Caps with threaded port have ports angled at 10° tilt for more accessible tubing connections. Select caps with stainless…

  • Individual tubes with and without caps Dome caps RNase/DNase and Pyrogen Free Not autoclavable

  • Colors permit easy identification and sorting Polypropylene caps fit all 1743E10 series PYREX ® bottles ranging from 100 mL to 10 L Autoclavable to 140°C One-piece cap eliminates liners Plug seal ensures leak-free closure Case contains 20 caps

  • Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps

  • Caps and Seals

    DWK Life Sciences (Wheaton)

    1230K91 - 1230K96: Black phenolic screw caps With 14B rubber liner Autoclavable Ideal for culture work 1230L89 - 1230L94: Tear-off unlined aluminum seals This seal can be completely removed and contents readily poured from bottle

  • White Unlined Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. Unlined polypropylene closures are also available in black. These caps are autoclavable and are suitable for many dry products.

  • …with hazardous or valuable materials. O-rings are made from silicone to insure a leakproof seal and caps accept color coding inserts. Sterile tubes are gamma irradiated are packed 50 in a bag and 10 bags in a pack. Tubes and O-ring caps are autoclavable. Tubes can be centrifuged to 20,000 RCF.

  • Kim-Kap Test Tube Caps

    DWK Life Sciences (Kimble)

    Polypropylene closure Autoclavable Natural For use with the KIM-RAK or other disposable culture tubes.

  • BioClean Clearview™ Autoclavable Panoramic Goggles have a super-soft thermoplastic rubber frame featuring an indirect ventilation system to provide comfort and reduce the risk of contamination entering the controlled environment. With extra depth and width for increased field of vision they…

  • These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.

  • …glass, providing exceptional resistance to heat shock and chemical leaching. Attached black phenolic (thermoset) rubber lined caps are autoclavable. The Liner is compliant with FDA 21 CFR 177.2600 Rubber Articles Intended for Repeated Use. The liner exhibit good resiliency and resistance…

  • These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

  • Dome cap or flat cap RNase/DNase and Pyrogen Free Not autoclavable These clear reaction tubes have uniformly thin walls (0.0085 inch) to enhance thermal transfer and reduce cycling times. Despite minimal wall thickness, they tolerate boiling, freezing and cycling. Flat top cap is…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.