Autoclavable Caps

These autoclavable caps are designed to ensure the ultimate in product safety.

…cap is an ingenious combination of our TriForest septum Cap and vented DuoCAPs™. It provides an additional layer of protection to the standard septum caps. Port Cap Kit (3-Port and 4-Port) Given the multiple port needs of our customers, we have designed the port cap in autoclavable…

Autoclavable, leakproof Nalge 2405 Made of contact-clear polypropylene copolymer with polypropylene screw cap and stem Stem and cap are molded in one-piece 9765N80 wash bottle takes cap number 28. 9765N90 wash bottle takes cap number 38.

BioClean Clearview™ Autoclavable Panoramic Goggles have a super-soft thermoplastic rubber frame featuring an indirect ventilation system to provide comfort and reduce the risk of contamination entering the controlled environment. With extra depth and width for increased field of vision they…

…autoclaved full with cap off spout. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Fine, steady stream when squeezed for dependable delivery Autoclavable when full, with tips uncapped Captive, blue polypropylene spout cap…

…autoclaved full with cap off spout. Tethered spout cap snaps securely into place and won't pop off or leak when the closed bottle is squeezed. Fine, steady stream when squeezed for dependable delivery Autoclavable when full, with tips uncapped Captive, blue polypropylene spout cap…

These autoclavable caps are designed to ensure the ultimate in product safety. The liners are white styrene-butadiene faced with Teflon.

These autoclavable caps are designed to ensure the ultimate in product safety.

These autoclavable caps are designed to ensure the ultimate in product safety.

…Screw Cap Microcentrifuge Tube Caps feature o-rings to form a secure seal. Optimized for secure short term storage in low temperatures, these autoclavable screw caps are available in a variety of colors, and adapt to your scientific experiments.  Screw Cap Microcentrifuge Tube Caps Design…

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel…

Natural polypropylene Use end caps to securely close off 3/4" or 3" sanitary port Groove on underside of end cap accepts standard sanitary gasket Autoclavable end caps meet USP VI requirements and comply with 21CFR177.1520 for food use

Tefon®-faced (14B) rubber liners Autoclavable caps are designed to ensure the ultimate in product safety. The liners are made of a nontoxic white styrene-butadiene rubber and are faced with Teflon® which offers excellent chemical resistance. They are available in convenient lab pack quantities as…

Bonded Teflon®-faced silicone liners White, autoclavable caps have a bonded Teflon-Faced Silicone Liner making them suitable for storage and containment of volatile solvents, sensitive compounds and corrosive chemicals.  The liners consist of 0.055” of Silicone and 0.005”…

…Caps Closure Material: Virgin Class VI Medical Grade Polypropylene with Molded-in thermoplastic elastomer gasket Type: ScrewTop 2D Barcode Volume (Metric): 1.0mL Closure: Yes Description: V-Bottom ScrewTop Tubes Closure Color: Blue Autoclavable: Autoclavable (with cap…

Polypropylene closure Autoclavable Natural For use with the KIM-RAK or other disposable culture tubes.

PTFE-lined Film/foam backing for broad chemical resistance Not autoclavable

Blue polypropylene vented cap has a 0.22µm PTFE hydrophobic membrane to allow gas exchange while preventing contamination. They are autoclavable at 121°C. Must be used with our 70mm silicone gasket

Bonded Teflon®-Faced Silicone Liners White autoclavable open-top caps have a bonded Teflon-Faced Silicone Liner making them ideal for storage and retrieval of volatile solvents, sensitive compounds and corrosive chemicals. The liners consist of 0.055” of Silicone and 0.005” of…

These reusable Corning® caps are fabricated specially formulated phenolic resin to resist the effects of temperature and steam in autoclaving. Caps are provided with a glued-in white rubber liner.

Colors permit easy identification and sorting Polypropylene caps fit all 1743E10 series PYREX ® bottles ranging from 100 mL to 10 L Autoclavable to 140°C One-piece cap eliminates liners Plug seal ensures leak-free closure Case contains 20 caps

These PYREX® culture tubes are supplied with phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a Polytetrafluorethylene (PTFE) interface firmly…

White Unlined Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. Unlined polypropylene closures are also available in black. These caps are autoclavable and are suitable for many dry products.

Black Unlined Polypropylene Caps are known for good impact strength, cost effectiveness, and pliability. Unlined polypropylene closures are also available in white. These caps are autoclavable and are suitable for many dry products.

…of the cap to rotate independently preventing tubes from tangling when caps are removed or attached. Caps are constructed of PTFE body and PP collar* and are autoclavable. Caps with threaded port have ports angled at 10° tilt for more accessible tubing connections. Select caps with stainless…

Caps fit Corning media bottles, Erlenmeyer flasks and spinner flasks with standard GL threads. Standard Plug Seal Caps are autoclavable and use a linerless plug seal design for efficient sealing. Pouring Rings fit on the lips of bottles for drip-free pouring. Autoclavable Vented Caps…

1230K91 - 1230K96: Black phenolic screw caps With 14B rubber liner Autoclavable Ideal for culture work 1230L89 - 1230L94: Tear-off unlined aluminum seals This seal can be completely removed and contents readily poured from bottle

1230K91 - 1230K96: Black phenolic screw caps With 14B rubber liner Autoclavable Ideal for culture work 1230L89 - 1230L94: Tear-off unlined aluminum seals This seal can be completely removed and contents readily poured from bottle

These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C. Caps are provided with a white rubber liner.

Tubes with round bottoms are manufactured from ASTM E438 Type 1 Class A Borosilicate 3.3 glass. Includes polypropylene autoclavable screw cap with PTFE liner.

… With flat screw caps with integral elastomeric seal Cap includes soft griping surface ATP, RNase/DNase and Endotoxin Free (non-pyrogenic) Polypropylene USP Class VI resin Centrifuging to 20,000 x G Freezable to -80C Autoclavable Natural color caps Made in USA

…volatile solvents, corrosive chemicals and sensitive compounds Liner is ultrasonically welded to the cap to eliminate the possibility of glue contamination and bond failure common with autoclaving Available in convenient Lab Pack quantities as well as larger Case Packs Low-compression-set…