Astm Type Ii Water

Meets ASTM Type II specifications for distilled water. Suitable for most laboratory applications.

General Composition: Demineralized, distilled water containing less than 20ppm total solids and less than 0.3ppm iron. Equivalent to Type II reagent grade water. Formula: H₂O Formula Weight: 18.02  

… ASTM Type II Reagent Grade Water (D1193-99e1) (ASTM2) Applications Type II laboratory grade water is an essential part of creating chemical reagents, microbiological buffers and media that are consistently pure. It is also an excellent source of water for glassware…

CAS Number: 7732-18-5 Shelf Life (Months): 60

Formula: H₂O Formula Weight: 18.02 CAS Number: 7732-18-5 Description: Packaged in plastic containers

Azer Scientific's Deionized Water meets or exceeds the specifications for CAP Type I, CAP Type II, ASTM, NCCLS and USP water.

Ricca ACS Reagent Grade Water is manufactured by a continuous process that has been validated to produce high purity Water meeting, as a minimum, the specifications below at the time of packaging. This water is specially purified by conventional water softening, prefiltration, activated carbon…

Synonyms: Water Molecular Formula: H2O Molecular Weight: 18.02 Linear Structural Formula: H2O MDL Number: MFCD00011332 Melting Point: 0 C (lit.) Density: 1.000 g/mL at 3.98 C (lit.) Refractive Index: n20/D 1.34 (lit.) Application: Distilled, ASTM Type II

Formula: H₂O Formula Weight: 18.02 CAS Number: 7732-18-5

…according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried, and assembled in a contaminate-free environment. The exterior of each case is labeled with a lot number. Each case contains…

…Water  Applications HPLC water is used for: Liquid chromatography (LC) High performance liquid chromatography (HPLC) Ultra high performance liquid chromatography (UHPLC) Quality This water produced and tested to meet or exceed ASTM Type I standards.  The water…

…operation and ultra high flexibility for producing laboratory-grade purified water. * Water exceeds ASTM, NCCLS, ISO and USP reagent water standards. arium® pro UV wall-mounted unit for producing ultrapure water for chromatgographic applications with front bottom-mounted display dispenser…

…deliver Type I water for a wide range of demanding lab applications. Ideal for atomic absorption spectrophotometry, ion chromatography and ICP-MS. Water conforms to BS 3978 (1987) grade I water for lab use, ASTM Type 1, CAP Type 1, NCCLS Type 1 and ICMC 'IDEAL' specifications. UHQ II incorporates…

…producing ASTM Type 1 ultrapure water and Type 3 pure water. This system features the latest reverse osmosis technology and a unique filter cartridge to deliver water of the highest reproducible quality. The arium® comfort I consistently delivers reagent-grade ultrapure water at rates of…

Used to determine the water content in petroleum and bituminous material. Similar to ASTM Type, except supplied with joints and stopcock to empty measuring tube during the determination. The 10 mL size is subdivided in 0.1mL from 0-1mL, 0.2mL from 1-10mL; 20mL size in 0.1mL from 0-1mL, 0.2mL from…

…system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water. Lasting economy: Water purification progresses through…

…water purification system with 20L tank capacity. It is equipped with a pre-treatment cartridge to increase the life span of all consumables. In addition, it displays alerts for consumable replacements and keeps track of replacement history. The WG205 produces ASTM type 1 deionized water and type 2…

…DI is a highly efficient water treatment system and the ultrapure water quality exceeds the ASTM Type 1 quality standard. Water is purified by a three-stage process. In the first two stages, both organic and inorganic components are removed reliably from the feed water by using the specially…

…according to EPA recommended wash procedures. Washed with laboratory grade biodegradable, non-phosphate detergent, rinsed with ASTM Type I De-ionized water, oven dried, and assembled in a contaminate-free environment. The exterior of each case is labeled with a lot number. Each case contains…

…for installation in arium® water purification systems to produce high ultrapure water beyond ASTM type 1 standard. H2O-A-PACK (1213R35) Analytical Kit, cartridge set for arium® VF & UV ultrapure water systems. The set including 2 water purification cartridges: 1…

…touch display with self-explanatory navigation Direct access to all available dispensing options (direct/volume/favorite) Produce ASTM Type 1 ultrapure (18.2 MOhm) Volume dispense from 50 ml Delivers a flow rate of 1 liter per minute The system is equipped with a high-resolution,…

…ultrapure water. As a result, this filter makes the arium® pro UF ideal for use in cell cultivation, electrophoresis, and many other related applications. Supported by the top-down flow technology incorporated into Biological Kit cartridges, the system produces ASTM Type 1 ultrapure water…

…ultrapure water that exceeds the ASTM Type 1 quality standard. High performance capacity thanks to efficient ion exchange resins Fast and effective adsorption of impurities through high-grade activated carbon Best ion removal delivers ultrapure water that exceeds the ASTM Type 1…

Similar to 7745 but with overflow line to allow excess solvent to return to boiling flask. Used to determine the water content in petroleum and bituminous material. Similar to ASTM Type, except supplied with joints and stopcock to empty measuring tube during the determination. The 10mL size is…

Sterile, Molecular Biology, LC/MS, HPLC, ACS Reagent Grade, as well as ASTM Type I, II, III, IV, and USP, EP, and JP Purified Water available. Several packaging sizes available.

… Water system validated under cGMP ISO 9001:2008 compliant FDA Class I Medical Device registered Tested to latest USP/ EP requirements Low microbial/ Non-sterile Pharmaceutical testing labs Sterile, Molecular Biology, LC/MS, HPLC, ACS Reagent Grade, as well as ASTM Type I, II,…

Consistent water quality Type 2 laboratory water meets ASTM Type II, CSLS-CLRW and ISO 3696 international standards The LabTower is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity Compact mobile design …

Angled two neck round bottom flask. Two-neck heavy wall flask with 24/40 Standard Taper outer joints Side neck is angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

…and inorganic constituents. The set was designed specifically to match the unit and delivers ultrapure water that even exceeds the ASTM type 1 quality standard. Such consistently high water quality is a guarantee for optimal reproduceability of your results. Optimized filling materials, such…

…inner drip joint at the bottom 283000 does not have a drip joint Two hose connectors at the top for water inlet and outlet Ref: ASTM Method D94, D95 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

The Barnstead LabTower EDI system delivers up to 200L/day of Type 1 ultrapure water (18.2 megohm) or Type 2 pure water (10-15 megohm) from a tap feed water supply. Water product quality exceeds international standards ASTM Type 1 with a resistivity of 18.2 megohm and TOC 1-5ppb with optional…

…control of 0.01°C within the range of 20° to 100°C, providing the temperature sensitivity required by ASTM D 445 for kinematic viscosity measurements. A cooling coil, when connected to tap water or a cooling system, permits operation below or slightly above ambient temperature. Temperature…