Astm Centrifuge Tubes

… Oil Centrifuge Tube (2623Q33) In accordance with ASTM D 96 Capacity 125 mL Graduations: from 5 to 10 in 1 from 10 to 25 in 5 at 50 and 100 per ASTM Standard D 96 Fits Thomas number 2525C07 Carrier and 2525C05 Rotor in IEC Centrifuges.

…with ASTM D 91, D 96; API Standard 2500 Capacity 100 mL Calibrated "to contain" Graduations:  from 0 to 1/2 in 0.05  from 1/2 to 2 in 1/10  from 2 to 3 in 1/5  from 3 to 5 in 1/2  from 5 to 10 in 1  from 10 to 25 in 5  at 50 to 100 per ASTM…

Designed for use in ASTM D-2273 and ASTM D-2709, this borosilicate glass capillary tipped long form centrifuge tube is 200mm in length.

…cap for 1215F92 is 45066C 1215F92 is a large-capacity, 100mL tube with screw thread closure Manufactured to the specifications found in ASTM 2158 Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

…rotor for tubes & bottles ranging from 1.5 mL to 290 mL and specialty rotors for spinning ASTM tubes, Chrome Bath tubes, Babcock tubes and Schlenk tubes. Five (5) year warranty. Features: Temperature control optional +20 °C to +90 °C (46H) Universal swing-out rotor for tubes & bottles…

Can be used in the determination of residues in liquified petroleum (LP) gases, ASTM Method D 2158 Calibrated "to contain" Capacity 100 mL Graduations: 0 to 1 in 0.05 mL Dimensions: 37 mm o.d. x 203 mm L.

This long form 100mL capacity oil centrifuge tube has a capillary tip that makes it ideal for use when only small amounts of solids are present. Made of borosilicate glass, its approximate widest O.D. is 38mm and approximate length is 200mm. Reference No. ASTM D 2709

Graduations etched in glass with broad red front In accordance with ASTM D 91, D96, D 893, D 1796; API Standard S01, S20, S27, 2500; ANSI Method Z11.8, Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2…

…contain" (TC), this borosilicate glass long oil centrifuge tube is used for determinations of water and sediment in petroleum and its products, including fuel oils and lubricating oils. See ASTM Methods D 96, D 1796 and D 91 and also API Code 2500. Reference No. ASTM D 96, D 1796, and D 91

…"to contain" (TC), this Goetz-type borosilicate glass bulb oil centrifuge tube is a pear shaped tube, similar to LG-4420, but it has a lower stem calibrated to hold 1.5mL. Specified in ASTM Method D 96 as suitable for a number of tests on petroleum products. Reference No. ASTM D 96

These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

KIMAX® conical bottom centrifuge tube is used for testing of petroleum products according to ASTM D91, D893 and D1796. Tube has a permanent red stripe under the white enamel graduations for easy reading of results Scale and legend are durable white ceramic enamel Top is tooled to…

…walled tubing to withstand higher centrifugation speed Top has a screw thread finish Autoclavable cap with rubber liner is included but not attached Replacement cap is 45066B Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type…

…and legend are durable white ceramic enamel Rings coincide with specific volumes of liquid Supplied in a matched set of 6 Graduated ring scale of any of the six tubes will not vary by more than 3 mm from that of any other tube within the set *Do not centrifuge with stopper in tube.

…with D96 Thomas No. 1209Q02 - Centrifuge Tube, Short Tube is 6" Marked in 200 parts and can be used with our Portable Centrifuge; Oil Test Centrifuge with Short Cone Rotor in conformance with D96 Thomas No. 1209Q03 - Cork Stopper This cork stopper is used with all Koehler centrifuge tubes

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. Tubes are plastic shrink…

Tubes are made from borosilicate glass in compliance with ASTM Specification E438, Type I, Class A or B glass requirements. With conical shaped bottoms on the 5, 10, and 15 mL sizes and a bullet-nosed shape on the 50 mL size to withstand centrifugation up to 2980 RCF. The 5, 10, and 15 mL sizes have…

ASTM compliant for petroleum testing Swing out rotor for pear shaped or conical ASTM tubes LCD display, control speed in rpm or rcf 230V only The OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place…

Solid pennyhead stopper for volumetric flasks, centrifuge tubes, etc. Meets ASTM Standard E 694.

Closure of one-piece construction with a seal achieved due to a unique inner sealing ring. Intended for use with 73750, 73760 and 73770 disposable culture tubes and 73785 disposable centrifuge tubes. Natural polypropylene Autoclavable Designed from ASTM Specification E982

…in determination of volume of precipitate formed by centrifuging definite quantities of steam cylinder stocks and black oils and other lubricating oils (ASTM D91 and D128); in tests for water-insoluble solids in methylcellulose (ASTM D1347); and in testing for acidity of distillation residues…

…I and ASTM E438, Type I, Class A requirements Components for the Bitterness Test Kit (2) Class A Volumetric Pipets, 5mL (2) Class A Volumetric Pipets, 10mL (2) Class A Volumetric Pipets, 1mL (2) Class A Volumetric Pipets, 20mL (6) Heavy-Duty Centrifuge Tube with Screw…

…Multiple Tubes Sizes Temperature Remains Uniform Across the Block Can be Used with Dry Ice or CLS-2991 Lab Armor Beads Rack can be Placed on Hot Plate for Heating Solid aluminum metal chamber for micro centrifuge tubes. Ideal way to keep micro centrifuge tubes cold by placing…