Aspirator Flask

The aspirator with trap flask FTA-1 with a 1L trap flask is designed for the aspiration or removal of any remaining alcohol or buffer from microtest tube walls during DNA / RNA purification and other macromolecule re-precipitation techniques. An ideal personal tool for independent operation…

The FTA-2i aspirator with 2L trap flask is designed for removal of alcohol, buffer and liquid from reaction vessels eg during DNA / RNA purification and other macromolecule re-precipitation techniques. All in one system with integrated pump 2L autoclavable polypropylene trap flask Fitted…

…Vacuum Bottle Trap is a useful tool for easy and continuous liquid aspiration with vacuum when aspirating tissue culture media, wash solutions, supernatant fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the attached…

…conveniently aspirate and collect fluids using a vacuum source Holds 3200ml (108oz) and the included trap prevents fluid flow into the vacuum source Use to aspirate media, waste chemicals, cell washing solutions, and more Ideal for use with dishes, plates, flasks and tubes All…

The QuikSip™ is a convenient bottletop aspirator that removes supernatants, cell culture media, and other liquids from dishes, flasks, culture bottles, centrifugation tubes, multiwell plates, and more. It is small, portable, and doesn’t require an external vacuum or power source. No…

Aspirating pipettes are sterile, individually wrapped plastic serological pipettes that are supplied without filter plugs and graduations for vacuum aspirating applications. They are very useful in tissue culture applications when aspirating larger volumes from dishes, flasks, or roller bottles.

… NEW – 300cm2 Tissue Culture Flask now available with plug seal cap (Part No. 229360) Available in 7 sizes: 12.5, 25, 75, 182, 225, 300 and NEW 182cm2 Deep Volume Flask (229381) NEW – 182cm2 Deep Volume Flask (Weekend Flask) – Extra depth allows for more media…

…Flask, Vacuum Pump, Porcelain Buchner Funnell, 9cm filter paper, connection tubing, and a rubber stopper. The stopper hole is specially cut to hold the Buchner funnel. The Vacuum Pump is simplifies the process of vacuum filtration, eliminating the need for a water source and vacuum aspirator. It is…

…the products. Suspension culture flasks are non-treated. Surfaces are flat and free from striation to provide improved transparency. Flasks are available in four different sizes; 25ml (12.5cm 2 ), 50ml (25cm 2 ), 250ml (75cm 2 ) and 600ml (182cm 2 ). Flasks are provided with vent caps that…

…allows to pour or aspirate/recover cells using a pipet Consistent surface treatment for predictable scale-up Lot number printed on each flask for traceability Manufactured in compliance to cGMP standards Disclaimer: This product is not intended to mitigate the presence of…

…Ovation couldn't be easier. Download the Form in the Additional Info Tab to receive your free trial pipettes. Allows aspiration from tubes, flasks and bottles Uses convenient, disposable tips Relaxed grip design, low weight and electronic operations make repetitive…

In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

…REACH™ eliminates the discomfort and fatigue normally associated with aspirating and dispensing under a hood. It dramatically reduces the amount of arm lift required to aspirate and dispense in bottles, flasks and dishes. This takes pressure off of the shoulder, elbow and wrist while…

…contamination of filtrate. The 300mL graduated funnel mounts on the 1L flask by way of a 40/35 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum…

…filtrate. The 15mL filtration funnel mounts on the 250mL filter flask using a 19/22 ground glass joint. The outlet tube of the support base is positioned below the the side arm connection of the the flask to prevent aspiration of the sample into the vacuum line. The anodized aluminum clamp secures…

…the same aspirating precision of glass, and the safety and benefits of plastic. Plastic construction allows the long flexible stem to be bent to draw liquid from narrow or small volume tubes. These pipets can be used with aspirating bulbs or vacuum applications to remove liquid waste from flasks,…

The BAKER SPE-12G is compatible with a large variety of glassware, including standard test tubes, volumetric flasks and autosampler vials. Samples are aspirated through disposable, prepacked extraction columns which selectively remove compounds from solution. Extracted compounds are then eluted…

Borosil® Reagent Bottles are perfect for storing media, solvents, and other materials. Sturdy ground glass necks for long-term durability. Solid glass flat-head stoppers, easy-to-read graduations and capacities, marking spots for labeling. Mechanically strong, chemically…

…bench or laminar hood. It has been designed to accommodate a variety of collection vessels including bottle top aspirating filter units, plastic vacuum bottles, glass Erlenmeyer flasks, or any device that accepts vacuum. The rechargeable lithium ion battery allows for use where an inline vacuum…

…Water Wash Bottles Analytical Balance(s) (0.001g resolution or better) Drying Oven Vacuum filtration setups (aspirators or small vacuum pumps, 250mL Buchner funnels, 250mL Erlenmeyer flasks w/sidearm, ring stands w/ laboratory clamps, rubber tubing, glass tubing, #6 two-hole rubber stoppers, #6…

In collaboration with Borosil® Glass Works, India, Foxx Life Sciences is proud to bring the outstanding quality of Borosil®’s USP Type 1 Borosilicate glassware to North America for the first time. Manufactured from the same low-expansion, chemically resistant Borosilicate glass North…

…nitrogen determination of one or two samples up to five grams. Unit is portable and can be placed on any bench top. Requires connection to a water aspirator pump for operation. Inlet and outlet water connections are 3/8" NPT. Frame is constructed of epoxy-coated steel. Features: two 600-watt…

…Unit is supplied with one gasket, a tube washer, an Erlenmeyer flask and a 3/8” hose connection ·         Operates efficiently with a conventional sink aspirator ·         Recommended…

…with six ports and serrated tip which is for connection to any simple water aspirator (not supplied). Complete with glass manifold, cabinetry, electrical controls, heaters, 3 wire cord and plug and six 100 mL flasks. Dimensions: 22 9/16” x 9” x 14” high; shipping weight 17 lbs.

…lines and scientists alike, Vactrap safely contains waste from supernatant removal, chemical separation, and cell or tissue culture media aspiration. Best of all, Vactrap comes ready to use--simply attach to your vacuum and begin your work. The full Vactrap system includes two shatterproof…

…plug. Includes fill valve for filling the boiling flask, rear cooling water connections through the back of the housing, adjustable height shelf to support the receiving flask, water bottle for introducing distilled water to the boiling flask via the fill valve, and one large "U" clamp…

…vacuum source, a Supelco SPE Vacuum Pump Trap collects all liquids that are aspirated through the SPE tubes, preventing contamination of the vacuum pump. The easily assembled kit contains a polypropylene filtering flask, a one-hole rubber stopper, 4 in. (10 cm) of polypropylene tubing and 5 ft. (1.5…

…solution. Use 5 mL volume for 6-cm plates and 10 mL volume for 10-cm plates and T75 flasks.4. Allow cell culture vessel to sit at room temperature overnight.5. Aspirate the Poly-L-Lysine solution the following day and rinse vessel with sterile water followed by coating with desired ECM protein.

…for a water source or vacuum aspirator. It is more economical than an electric vacuum pump. The pumping rate is 15ml per stroke and will displace up to 725ml of air. The pump is fitted with a valve to release the vacuum. Includes: 1 Borosilicate Filtering Flask, 500ml 1 Vacuum Pump 1…

…(or approximately 2–5 x 107 suspension cells in flask) and incubate at 4° C for 10 minutes. For suspension cells, add the RIPA buffer to washed cell pellet in a 15 ml conical centrifuge tube. Disrupt cells by repeated aspiration through a 21 gauge needle and transfer to a 15 ml conical…

…monolayer (or approximately 2–5 x 107 suspension cells in flask) and incubate at 4° C for 10 minutes. For suspension cells, add the RIPA buffer to washed cell pellet in a 15 ml conical centrifuge tube. Disrupt cells by repeated aspiration through a 21 gauge needle and transfer to a 15 ml conical…