Aseptic Transfer Caps

Corning® Erlenmeyer Flask Aseptic Transfer Caps are sterile (10 -6 SAL), individually double bagged and fit the 2L Corning® Polycarbonate Erlenmeyer flasks. These aseptic transfer caps can also be used on Corning 850 and 1700cm 2 plastic disposable roller bottles. Venting port ends…

…Medical Grade USP Class VI resins to meet requirements of most laboratories. When combined with the matching Aseptic Transfer Caps, Heavy Duty Vacuum Bottles can be used for safe, sterile transfer of reagents, media and solutions required in biotechnology, cell culture and other laboratories.

…with vessels to help transfer liquid aseptically. The internal end is a rigid polypropylene dip tube designed to reach the bottom of the flask. The venting port ends in a 50mm diameter vent filter with a 0.2 µm pore PVDF membrane and a barbed fitting. The liquid transfer port uses a 1/4"…

…The preassembled transfer caps have two ports. One port ends in a 0.2µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a Male Luer Lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling…

…sampling process and ensure the aseptic sampling. The liquid inlet tubing is provided with a PTFE needle filter, which solves the issue of liquid remaining in the tubing during the feeding process. Bi-Directional Transfer Cap The bi-directional transfer cap is used along with a 2L, 3L or 5L…

Corning Spinner Flask Aseptic Transfer Caps will enhance the productivity of your cell culture operations when adding or removing medium and cells. Aseptic Transfer Caps are sterile (10?6 SAL), individually double bagged and fit the side arms on 3L Corning Disposable Spinner Flasks (Cat. No. 3563). …

FlowLinX conical tube caps are ideal for use with conical sampling tubes for aseptic fluid sampling applications used in cell culture, fermentation, chromatography, sterile bulk and transfer.  The caps are available in 50mL and 15mL size with 1/8" hose barbs

…materials Optional Vented Caps (Cat. No 3567) and Aseptic Transfer Caps (Cat. No. 3562) are available Aseptic Transfer Caps are sterile (10-6 SAL), individually double bagged and fit the side arms on 1L Corning® Disposable Spinner Flasks (Cat. No. 3561) Cap is made of high density…

For aseptic liquid transfer to Nalge containers Nalge 2162 83 mm polypropylene cap with fittings Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters.…

…121°C and will hold vacuum up to 24 hours at 20°C  White polypropylene (PP) caps have TPE gasket for leakproof sealing Aseptic Transfer Cap Features: Provide aseptic transfer of reagents, media, and solutions to and from Heavy Duty Vacuum Bottles Made from…

Vented Overcap and Solid Overcap can be used directly on the adaptor caps to block dust and bacteria. Vented Overcap is equipped with a 0.22 μm hydrophobic breathable membrane to achieve aseptic ventilation during liquid transfer.

…silicone tubing. This assembly provides a 83B cap with flexible two-port filling and venting system, allowing for extractable free, aseptic gas and liquid transfer as required for pharmaceutical, biotechnology, and laboratory fluid transfer applications. These high-quality carboy assemblies…

…silicone tubing. This assembly provides a 83B cap with flexible two-port filling and venting system, allowing for extractable free, aseptic gas and liquid transfer as required for pharmaceutical, biotechnology, and laboratory fluid transfer applications. These high-quality carboy assemblies…

…silicone tubing. This assembly provides a 83B cap with flexible two-port filling and venting system, allowing for extractable free, aseptic gas and liquid transfer as required for pharmaceutical, biotechnology, and laboratory fluid transfer applications. These high-quality carboy assemblies…

…silicone tubing. This assembly provides a 83B cap with flexible two-port filling and venting system, allowing for extractable free, aseptic gas and liquid transfer as required for pharmaceutical, biotechnology, and laboratory fluid transfer applications. These high-quality carboy assemblies…

…liquid transfer applications. For use with Nalgene bottles and carboys with 53B closures, including pre-mounted lengths of platinum-cured silicone tubing for easy customization of bottles and carboys. Ready to accept additional fluid transfer components such as aseptic connectors…

…liquid transfer applications. For use with Nalgene bottles and carboys with 83B closures, including pre-mounted lengths of platinum-cured silicone tubing for easy customization of bottles and carboys. Ready to accept additional fluid transfer components such as aseptic connectors…

Perform biopharmaceutical aseptic fluid transfer or sampling applications with the tri-clover flange of Thermo Scientific™ Nalgene™ PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these…

…silicone tubing. This assembly provides a 83B cap with flexible two-port filling and venting system, allowing for extractable free, aseptic gas and liquid transfer as required for pharmaceutical, biotechnology, and laboratory fluid transfer applications. These high-quality carboy assemblies…

…silicone tubing. This assembly provides a 83B cap with flexible two-port filling and venting system, allowing for extractable free, aseptic gas and liquid transfer as required for pharmaceutical, biotechnology, and laboratory fluid transfer applications. These high-quality carboy assemblies…

…The preassembled transfer caps have two ports. One port ends in a 0.2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer lock. The dip tube reaches all the way to the bottom of the flask for easy aseptic transfer of your liquid handling…

…is always a possibility when blood specimens are sent to the laboratory from a distance, the clot should be transferred directly to a tube of sterile ox bile and disintegrated with aseptic precautions. After overnight incubation the bile culture is examined for enteric organism in the usual manner.…

…for false positives associated with post-exposure transfer. Reduced incubation time of 24 hours Visually distinct results Chemical Indicator on label provides instant indication of exposure Saves time by eliminating aseptic culturing required with traditional spore strips …

…angled sidearm fittings can be used for aseptically transferring medium into or out of angled sidearm spinner flasks or for sparging the medium with gases. Fittings are comprised of a PET insert with a fluorocarbon O-Ring and a polypropylene sealing cap. Two 316 stainless steel tubes, which…

…Streptococcus agalactiae ). Incubate tubes with loosened caps for 48 hours at 35 ± 2°C in an aerobic atmosphere. Following incubation, centrifuge all cloudy cultures and use the supernatant fluid in the test. Aseptically transfer a specific aliquot of culture (or its supernatant) to a…