Aluminum Heating Blocks

Compare Tool

Select up to 3 products

Aluminum Heating Blocks
1 - 32 of 75
Sort
View
Show
  • …offer capacity for up to four blocks. The cavities within the high grade aluminum blocks are precision-machined to match the conical size and shape of 0.5, 1.5, 2.0, 15 and 50ml tube sizes, providing unsurpassed temperature uniformity. Nine assorted blocks are available in total for…

  • Aluminum Heating Blocks

    DWK Life Sciences (Kimble)

    Ideal for use in place of a sand bath in microscale experiments. Excellent heat transfer Does not interfere with magnetic stirring

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 96 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter

  • Aluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…

  • Polarsafe™ Cooling Blocks

    Argos Technologies

    Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

  • Three segment, anodized aluminum, heating/mixing blocks hold up to three different size and type of vessels at the same time. To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09…

  • OptiTherm® aluminum reaction / heating blocks provide a SAFE and cost effective solution for replacing your existing oil baths and heating mantles. The innovative PTFE shield on the unit reduces the exterior exposed surface temperature by as much as 100°C. For example the PTFE shield would…

  • Digital Dry Bath

    Benchmark

    …offer capacity for up to four blocks. The cavities within the high-grade aluminum blocks are precision-machined to match the conical size and shape of 0.5, 1.5, 2.0, 15 and 50ml tube sizes, providing unsurpassed temperature uniformity. Nine assorted blocks are available in total for…

  • Safety Pie Plate Holder keeps up to Four pie wedges securely locked together on the hotplate Aluminum construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced…

  • …and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer. Heaters require OHAUS modular heating blocks for operation. Modular blocks are sold separately . Operating…

  • Lab Armor Beads™

    Lab Armor

    Lab Armor™ Beads are eco-friendly and low-maintenance metallic beads that replace water in existing water baths, aluminum blocks in dry baths and even ice in ice buckets. The innovative Lab Armor Beads can also be used in containers placed in ovens and incubators to replace sample racks. …

  • …calibration enables to offset the temperature to desired value Timer allows the user to accurately monitor the heating time Wide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfecting Powder-coated steel body construction ensures…

  • • Solid anodized aluminum blocks resist the harshest environments and provide maximum heat retention. • All blocks include thermometer well for easily measuring block temperature. • Fit all Barnstead Thermolyne brand modular block dri-baths. • Max Tube Size: 13.75 mm • Number of Wells: 20

  • …solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Combination Blocks (5890J49, 1231R89, 1231R90) These blocks have been designed for variable sized samples. Constructed from a solid anodized aluminum block, the close contact…

  • …for durability and easy identification,Round reaction blocks are designed to fit directly on 135mm diameter, round top hot plate stirrers. Aluminum construction offers excellent heat transfer without interfering with magnetic stirring. All blocks are anodized for increased strength, durability and…

  • Aluminum alloy blocks, overall 4" x 3" x 2" high. Each block has a single, smaller bore well for thermometer; number of tubes and diameter shown below.

  • …dry block heaters Machined and fabricated from solid aluminum Anodized to resist oxidation Rows and columns are labeled on appropriate blocks for easy vessel identification Each block module measures 3" x 3 3/4 " x 2". See Thomas numbers 5152M65 to M75 for additional blocks.

  • … The Programmable Heating Blocks are designed for precise controlling of sample temperatures. Heating Blocks, also known as dry bath incubators, use aluminum inserts to suit the use of many types of laboratory test tubes, plates, and containers. Boekel programmable heating blocks are designed to be…

  • …PT-100 Temperature Sensor. Aluminum Construction Provides Excellent Heat Transfer While Not Interfering with the Magnetic Field Holes are Spaced for Optimum Stirring of All Vials Holder Fits All 135mm Diameter Hot Plate Stirrers Each Section of the Block is Engraved with the Vial Size…

  • Digital Dry Bath and Blocks

    Crystal Technologies

    …temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications. Microprocessor controlled with digital display High quality aluminum block and heating elements provide good temperature…

  • …when heating. Therefore, scientists are increasingly turning to specially designed aluminum blocks located on stirring hotplates to heat standard round bottom flasks. All Heat-On blocks are manufactured from solid aluminum providing excellent, even heat transfer to the entire block, preventing…

  • …biochemistry and analytical chemistry. All StarFish base plates and blocks are made from anodized aluminum, which provides excellent heat transfer. Precision manufacturing also ensures excellent contact between the blocks and the base plate. StarFish can be used for all types of chemical…

  • Dry Bath Accessories

    Torrey Pines Scientific

    Precision machined from solid aluminum Black anodized to transfer heat better and to protect blocks from spills. The bottoms of the blocks are machined to “nest” on the EchoTherm™ Heater/Chillers and Electronic Ice Cube™ Chiller to prevent movement.

  • …Dry Block Sample Incubation System. It features Reacti-Therm Modules that utilize dry block heaters to provide uniform, stable heating with a temperature range of 10–200°C. The Reacti-Therm Dry Block Sample Incubation System is available in four models—single block and triple block

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Weight: 5.0 lbs Weight metric: 2.3 kg Dimensions: 6.0" x 8.0" x…

  • …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • …into the sample, the thermal block is made of gold-coated silver serving much better physical properties than aluminum. As a result, the qTOWER 3 is characterized by excellent temperature control accuracy of ±0.1°C (over 96 wells) and first-class heating rates of up to 8°C/sec. This…

  • Blue anodized aluminum blocks hold tubes of various sizes in an aluminum bead bath Aluminum construction promotes the conduction of heat or cold from the Temp-Zone area to help maintain sample temperature Beads sold separately

  • …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Blue anodized aluminum blocks hold tubes of various sizes in an aluminum bead bath Aluminum construction promotes the conduction of heat or cold from the Temp-Zone area to help maintain sample temperature Beads sold separately

  • An Aluminum Single Block filled with Lab Armor Beads. Capacity: 0.25L and 0.50L of Beads, Thermal Uniformity: 'At 95°C to +/- 1.0°c w/Lid. LxWxH: 3.25 x 2.5 x 2.5 inches (8.4 x 6.4 x 6.4 cm). Variety of Colors.

  • Instatherm Blocks

    Ace Glass

    Aluminum insert for our 1200ml, Ace 9601-16, Instatherm oil bath. Combine the rapid and precise temperature control of Instatherm with the safety of aluminum heating blocks. You may stir using a hot plate stirrer, however do not apply heat to the bath. See our 9600-20 complete heating system which…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.