Aluminum Cooling Block

Compare Tool

Select up to 3 products

Aluminum Cooling Block
1 - 32 of 36
Sort
View
Show
  • Polarsafe™ Cooling Blocks

    Argos Technologies

    Polarsafe™ Cooling Blocks are perfect for the utmost in temperature control for precious laboratory samples. These electric blue aluminum blocks are anodized to stand up to cold temperatures. Uniform well construction provides inserted tubes with a snug fit and a highly efficient degree…

  • Blocks For Dry Bath Incubators

    Boekel

    …dry block heaters Machined and fabricated from solid aluminum Anodized to resist oxidation Rows and columns are labeled on appropriate blocks for easy vessel identification Each block module measures 3" x 3 3/4 " x 2". See Thomas numbers 5152M65 to M75 for additional blocks.

  • POGO® Chiller Block

    Alpaqua Engineering

    Solid aluminum block, 24 positions, for micro centrifuge tubes up to 10.90 mm diameter at 32.25 mm from the bottom. Each tube individually spring-supported to compensate for Z-positioning errors of pipettor probes.

  • Blocks for Thermolyne Dri-Baths

    Barnstead

    Aluminum alloy blocks, overall 4" x 3" x 2" high. Each block has a single, smaller bore well for thermometer; number of tubes and diameter shown below.

  • Thomas Blocks and Accessories For Analog And Digital Dry Block Heaters

    Ohaus

    …solid anodized aluminum block, the close contact of tubes to block walls allows for maximum heat retention. Single block. Combination Blocks (5890J49, 1231R89, 1231R90) These blocks have been designed for variable sized samples. Constructed from a solid anodized aluminum block, the close contact…

  • Aluminum Heating Blocks

    DWK Life Sciences (Kimble)

    Ideal for use in place of a sand bath in microscale experiments. Excellent heat transfer Does not interfere with magnetic stirring

  • OptiTherm® Aluminum Reaction/Heating Blocks

    Chemglass

    …OptiTherm™ blocks are available. The OPT100 is used for 100mL round bottom flasks; the OPT500 is used for 500mL round bottom flask and the OPT1000 is used for 1000mL round bottom flasks. Each block can be used with other corresponding inserts: See the chart above. The anodized aluminum flask…

  • Dry Bath Accessories

    Torrey Pines Scientific

    Precision machined from solid aluminum Black anodized to transfer heat better and to protect blocks from spills. The bottoms of the blocks are machined to “nest” on the EchoTherm™ Heater/Chillers and Electronic Ice Cube™ Chiller to prevent movement.

  • EchoTherm™ IC22 Digital, 2-Position Electronic Chilling/Heating Dry Baths

    Torrey Pines Scientific

    …of both plates. The chilling/heating surfaces are each 2.875" (7.3 cm) x 4.375" (11.1 cm) aluminum plates that are very flat for optimal contact with the sample blocks. When unloaded, the plates will reach below 0°C in under two minutes. They will heat to 37°C in under…

  • Tri-Block™ Reaction Block

    Chemglass

    …PT-100 Temperature Sensor. Aluminum Construction Provides Excellent Heat Transfer While Not Interfering with the Magnetic Field Holes are Spaced for Optimum Stirring of All Vials Holder Fits All 135mm Diameter Hot Plate Stirrers Each Section of the Block is Engraved with the Vial Size…

  • PIE-BLOCK Reaction Block System

    Chemglass

    Safety Pie Plate Holder keeps up to Four pie wedges securely locked together on the hotplate Aluminum construction provides excellent heat transfer while not interfering with the magnetic field Interchangeable pie wedges permit various sized vials or flasks on one hotplate Holes are spaced…

  • Analog Dry Block Heaters

    Ohaus

    …and PCR strips or tubes. Each block has a thermometer well for measuring block temperature. Anodized aluminum modular blocks provide superior temperature stability and heat transfer. Heaters require OHAUS modular heating blocks for operation. Modular blocks are sold separately . Operating…

  • Heat Transfer Block - Microscale

    Ace Glass

    Aluminum heat transfer block, 9594-12 for use in place of a glass sand bath in Microscale experiments. Offers excellent heat transfer and will not interfere with magnetic stirring. Block has four holes for vials and one hole for thermometers. 9594-16 for use on top of stirrer-hot plate to effect…

  • Lab Armor Bead Block - Single

    Shel Lab

    An Aluminum Single Block filled with Lab Armor Beads. Capacity: 0.25L and 0.50L of Beads, Thermal Uniformity: 'At 95°C to +/- 1.0°c w/Lid. LxWxH: 3.25 x 2.5 x 2.5 inches (8.4 x 6.4 x 6.4 cm). Variety of Colors.

  • Dry Bath Incubator Touch Screen Block Heaters

    Boekel

    …sample temperatures. Heating Blocks, also known as dry bath incubators, use aluminum inserts to suit the use of many types of laboratory test tubes, plates, and containers. Boekel programmable heating blocks are designed to be used with standard aluminum dry blocks (nominally 3” deep x…

  • Radley Heat-On™ Blocks

    Heidolph

    aluminum providing excellent, even heat transfer to the entire block, preventing hot spots. Heat-On weight-saving design reduces the mass of the block to be heated, making the heat-up times significantly faster. This weight-saving design also offers faster post synthesis cool down times. Blocks

  • Dynabloc, Heating Blocks for Flasks

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Digital Dry Bath and Blocks

    Crystal Technologies

    …temperature distribution on the thermal block. These Digital Dry Baths are ideal tools for a wide variety of life science, clinical and general chemistry applications. Microprocessor controlled with digital display High quality aluminum block and heating elements provide good temperature…

  • Dynabloc, Heating Blocks for Vials & Tubes

    Ace Glass

    …To anchor blocks to either a 145mm or 135mm diameter hotplate/stirrer, use our 13698-03 (145mm) or 13698-05 (135mm) base plate. To remove blocks when hot, use our 13698-09 T-handle extractor. Accessories include PTFE clamps and aluminum support rods. Blocks and base plates are anodized aluminum.

  • Reaction Blocks for Circular Top Hot Plate Stirrers, Vials

    Chemglass

    …for durability and easy identification,Round reaction blocks are designed to fit directly on 135mm diameter, round top hot plate stirrers. Aluminum construction offers excellent heat transfer without interfering with magnetic stirring. All blocks are anodized for increased strength, durability and…

  • Dri-Block Dry Heat Baths

    Techne (Cole-Parmer)

    For precise temperature control; ±0.1°C Provide a safe, dry, constant temperature source in the laboratory for the purpose of incubation, boiling, inactivation, wet ashing, enzyme analysis, and a variety of clinical and industrial applications. NOTE: aluminum insert blocks are not included.

  • Digital Dry Baths/Block Heaters

    Thermo Scientific

    …offset the temperature to desired value Timer allows the user to accurately monitor the heating time Wide range of interchangeable aluminum alloy heat blocks provide versatility and allow for easy cleaning and disinfecting Powder-coated steel body construction ensures durability Built-in…

  • Touchscreen Dry Bath/Block Heaters

    Thermo Scientific

    …heating time Password protection feature Interchangeable aluminum alloy sample blocks designed to provide versatility, easy cleaning and disinfecting Range of configuration to hold 1, 2 and 4 interchangeable modular blocks to accommodate a variety of vessels and applications …

  • Reaction Heating Blocks, NMR, 10 Position, 5mm NMR Tubes

    Chemglass

    …Reaction block is designed to rest on a round or square top hot plate stirrers. NMR heating block is an ideal replacement for oil baths. Block provides a safe and clean way for preheating NMR tubes, performing kinetics and degradation studies in 5mm NMR tubes. All blocks are anodized aluminum. A…

  • Accutherm Vortex Incubator

    Labnet

    …technology to rapidly heat and cool precious samples. It’s compact footprint incorporates an intuitive control panel with large multi-color display, which allows users to easily program and view temperature, time and speed settings. Eight interchangeable aluminum blocks accommodate PCR plates…

  • Semi-Automatic Flash Point Testers

    Erdco Engineering

    …stainless steel test cup, stainless steel lid and shutter The metal cooling block (7120B25) is for above ambient testing. It is used to cool down the test cup between tests. The refrigerant-charged cooling block (7120B28) is used for sub-ambient testing. The heat transfer compound (7120B31)…

  • Multi-Use Well Plate/Tube Rack

    Labconco

    Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Weight: 5.0 lbs Weight metric: 2.3 kg Dimensions: 6.0" x 8.0" x…

  • SCILOGEX LED Digital Dry-Bath

    Scilogex

    …and space saving design, control of temperature and time is displayed in real-time with clear independent displays. Various high grade aluminum blocks are available for common tube sizes providing excellent temperature uniformity from ambient +5 to 120°C. Features: Easy-to-read…

  • FlexCycler2 PCR Thermal Cycler

    Analytik Jena

    …Aluminum/silver-coated anodized block material/surface coating Block exchange with Quck-X-change interchangeable 96 well, 48 well or combination blocks Very low noise emission The FlexCycler 2 Thermal Cyclers offers state-of-the-art heating and cooling rates in combination with…

  • EchoTherm™ Digital, Electronic Chilling/Heating Dry Baths

    Torrey Pines Scientific

    …storing enzymes or DNA libraries at a workstation, cooling blood samples prior to coagulation testing and more. The small, compact size uses very little bench space. The heating/chilling surface is a 2.875” x 4.375” aluminum plate that is very flat for good contact with the sample.…

  • Reactor Adapter for TNTplus vials

    Hach

    These aluminum tubes are inserted into the 16 mm vial wells of existing reactors, to adapt them to the 13 mm TNTplus vials. The adapters can be removed (once the heater block has cooled) if the customer needs to use 16 mm vial chemistries.

  • Biometra TAdvanced PCR Thermal Cyclers

    Analytik Jena

    …amplification by PCR High-Speed Thermal Block The Biometra TAdvanced Thermal Cycler is available with different block formats. The Quick Block Exchange technology allows for an easy exchange of block modules. All blocks are made of aluminum and offer high ramp rates for fast protocol…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.