Alkane Standard

Compare Tool

Select up to 3 products

Alkane Standard
1 - 17 of 17
Related Categories: Alkane
Sort
View
Show
  • Components: contains C 21 , C 22 , C 23 , C 24 , C 25 , C 26 , C 27 , C 28 , C 29 , C 30 , C 31 , C 32 , C 33 , C 34 , C 35 , C 36 , C 37 , C 38 , C 39 , C 40 , 40 mg/l each, in toluene

  • For GC analysis of total petroleum hydrocarbons (TPH) in water. Environmentally safer than previous methods. Calibration standard available as diesel #2/motor oil and diesel #2/mineral oil. Compound List (C10) n-Decane (124-18-5) (C12) n-Dodecane (112-40-3) (C14) n-Tetradecane (629-59-4)…

  • Components: contains C 8 , C 9 , C 10 , C 11 , C 12 , C 13 , C 14 , C 15 , C 16 , C 17 , C 18 , C 19 , C 20 ; 40 mg/l each, in hexane

  • 1000 μg/mL each component in hexane, analytical standard Components: Decane; Docosane; Dodecane; Eicosane; Heneicosane; Heptacosane; Heptadecane; Hexacosane; Hexadecane; Heptane; Nonacosane; Nonadecane; Nonane; Octacosane; Octadecane; Octane; Pentacosane; Pentadecane; Tetracosane;…

  • C10; C20 - C40 (all even), 50 mg/l each Density: 0.684 g/mL at 20 °C Refractive Index: n 20/D 1.388 RIDADR: UN 1206 3 / PGII

  • Density: 0.684 g/mL at 20 °C Components: contains C 10 and all even n-alkanes from C 20 to C 40, 50 mg/l in n-heptane each

  • in dichloromethane (varied) Components: Octane 500 μg/mL; Nonane 500 μg/mL; Decane 500 μg/mL; Undecane 500 μg/mL; Dodecane 500 μg/mL; Tridecane 500 μg/mL; Tetradecane 500 μg/mL; Pentadecane 500 μg/mL; Hexadecane 500 μg/mL; Heptadecane 500 μg/mL;…

  • 1000 μg/mL each component in hexane, analytical standard Components: Decane; Docosane; Dodecane; Dotriacontane; Eicosane; Heneicosane; Hentriacontane; Heptacosane; Heptadecane; Heptane; Heptatriacontane; Hexacosane; Hexadecane; Hexatriacontane; Nonacosane; Nonadecane; Nonane;…

  • C10 - C40 (all even), 50 mg/l each Synonym(s): Determination of hydrocarbons (even-numbered) according to ISO 16703 and EN 14039 Density: 0.684 g/mL at 20 °C Refractive Index: n 20/D 1.388 RIDADR: UN 1206 3 / PGII

  • Synonyms: Determination of hydrocarbons (even-numbered) according to ISO 16703 and EN 14039 Density: 0.684 g/mL at 20 °C Components: contains all even n-alkanes from C 10 to C 40 , 50 mg/L in n-heptane each

  • Compound List (C10) n-Decane (124-18-5) (C12) n-Dodecane (112-40-3) (C14) n-Tetradecane (629-59-4) (C16) n-Hexadecane (544-76-3) (C18) n-Octadecane (593-45-3) (C20) n-Eicosane (112-95-8) (C22) n-Docosane (629-97-0) (C24) n-Tetracosane (646-31-1) (C26) n-Hexacosane (630-01-3) (C28) n-Octacosane…

  • n-Undecane

    MP Biomedicals

    Undecane is a liquid alkane hydrocarbon. Undecane may be used as an internal standard in gas chromatography when working with other hydrocarbons. Since the boiling point of undecane (196°C) is well known, it may be used as a comparison for retention times in a gas chromatograph for molecules…

  • …each standard includes the average flash point for the lot and the standard deviation observed from 20 tests in 10 different laboratories. Nominal flash points for the various standards are shown in the accompanying table. The four standards with lower flash points are made from high purity alkane

  • Flash Point Reference

    Cannon Instrument

    …each standard includes the average flash point for the lot and the standard deviation observed from 20 tests in 10 different laboratories. Nominal flash points for the various standards are shown in the accompanying table. The four standards with lower flash points are made from high purity alkane

  • n-Alkanes Sys Performance Std

  • n-Decane

    MP Biomedicals

    … Decane has been used as a solvent in the preparation of high alkane phase emulsified suspensions (HAPES). It may also be used as a solvent to suspend the CdSe/ZnS nanocrystals during absorbance measurement. Internal standard in the GC analysis of oxalic, malonic, and succinic acids in biological…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.