Air Stirrer

… Compact and quiet; operates on compressed air at pressures from 30 to 100 psi (210 to 690 kPa) Sturdy, smooth-running motor develops 1/6 hp (120 W) at 80 psi (550 kPa) input Speed is variable by adjustment of valve which controls air intake Air inlet is 11 mm long x 13 mm o.d., threaded…

…unit Stirrer is powered by a low pressure air supply that eliminates the sparking hazard from electrical sources. Compact unit operates using only 3 to 8 psi (21-55 kPa) air pressure and it is useful for stirring vesseals up to 1 liter. Tubing is provided to connect to an air supply. …

…is obtainable by pressure regulation Plastic with brass bearings Completely immersible, allowing use in water baths Several stirrers can be connected in series Housing, 3” diameter x 3/4” thick, encases driving magnet, which is mounted in vaned rotor. Maximum…

…Corrosion-proof Speed range: 0-800 rpm Usable in hazardous locations, baths, incubators or other areas where electric stirrers are impractical Operates on water or air pressure between 15 and 40 psi. Knob regulates air/water pressure to control stir speed. Rated for 500 mL of water at…

…shaft size is 1/2” OD. Supplied complete with 4ft lenth of air hose with double fittings for connection to air supply. Please Note: For long And trouble-free life of your air powered stirrer, it is recommended that the air supply be filtered to remove oil and water aerosols as well as…

…heavy duty air motor with highly damped muffler. Complete unit consists of an air hose with a snap coupling on motor end and shut-off valve on the other. Motor will develop 1.5 hp. at 90 lbs. air pressure. Speeds are variable from 300 to 3000 r.p.m. It consumes approximately 1.98m3 free air (70cfm)…

Use stirrers anywhere; can be submerged With powerful magnets and no moving parts, these inductive-drive stirrers are designed to go into water baths and incubators. Standard Telemodul controller features space-saving design. Outstanding mechanical, physical, thermal and chemical…

This stirrer block is compatible with the ASX-1400 and ASX-1600 that are configured with the 80-position CETAC, 60-position Bel-Air, and 96-position OE4 PerkinElmer racks.

This stirrer block is compatible with the ASX-1400 and ASX-1600 that are configured with the 90-position CETAC, 96-position CETAC, and 90-position Bel-Air racks.

…with variable-speed control, allowing the user to create the most dynamic and violent mixing action with no formation of air bubbles Can be used as a regular stirrer by simply selecting the standard mode. Specially designed to handle the more viscous material. Direct driven and delivers…

Continuous shearing and blending action mixes with introducing air Corrosion-resistant stainless steel Teflon® TFE bushing 11,500 rpm 120V or 240V models available Includes lab clamp The upward flow stirrer may be used effectively with pharmaceuticals, cosmetics,…

The Cool Stir® Large Volume Magnetic Stirrer efficiently stirs fluid volumes from 10 liters up to 208 liters (2.5 to 55 gallons). Stirring speed is continuously changeable to around 600 rpm (maximum operational rpm depends on volume and density) delivering torque for mixing through powerful…

…and/or dissolves multi-part mixtures or suspensions of powders. Where ordinary propeller-type mixers fail due to vortexing, foaming or inadequate mix action, the Jiffy Mixer cuts mixing times of viscous materials by up to 90%. This unique design eliminates splashing and entrapment of air.

… Stirrer is designed for integration with incubators and controlled climate chambers 15 position stirrer with 1 to 1000 mL per point capacity Chemical resistant, sealed stainless-steel housing Speed: 130 to 1400 rpm Operating conditions are -10° to +56°C at 100%RH in air; 0°…

… Stirrer is designed for integration with incubators and controlled climate chambers 15 position stirrer with 1 to 1200 mL per point capacity Chemical resistant, sealed stainless-steel housing Speed: 100 to 2000 rpm Operating conditions are -10° to +56°C at 100%RH in air; 0°…

…applications with aggressive media in high-humidity environments with this Thermo Scientific™ Cimarec™ i Telesystem Multipoint Stirrer. The stirrer is designed for integration with incubators and controlled climate chambers. Includes: cord set with various plugs and the Telemodul 40 C…

…DO/BOD/Temperature Meter. The built-in stirrer provides vigorous sample agitation, preventing oxygen stratification and can easily be disassembled for cleaning. The probe stand, which is free standing, can be used to store the probe when not in use, and also functions as an air calibration beaker.

…applications with aggressive media in high-humidity environments with this Thermo Scientific™ Cimarec™ i Telesystem Multipoint Stirrer. The stirrer is designed for integration with incubators and controlled climate chambers. Includes: cord set with various plugs and the Telemodul 20 C…

…stirring environments with Thermo Scientific™ Cimarec™ i Maxi Stirrers, 100% maintenance– and wear–free hermetically sealed units. With powerful magnets and no moving parts, these inductive-drive stirrers are designed to go into water baths and incubators. Telemodul…

Complete reactor system on our NEW open air stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock…

Complete reactor system on our NEW open air stand. PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock And…

…separate indicators lights for the power, heater and stirrer functions, along with a 3-digit display indicating the actual temperature from ambient to 450°C. Stirring speeds from 100 to 2000rpm are obtained by lightly touching the stirrer speed keys. Temperature Control Heating is controlled…

… Mobile: Large Swivel Casters with Locking Mechanisms. New open air design, with decreased frame depth, allows greater access to the reactor and peripheral glassware. Motor mount arm can be used with either electric, air, or XP motors and can swing out of the way for greater access to reactor.…

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

Complete reactor system on our NEW open air stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock…

Complete reactor system on our NEW open air stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: Motor Mount Arm Can Unlock…

…fast drying. A blower circulates heated air in a horizontal airflow pattern for efficient heat distribution with tight temperature tolerances of up to ±0.3°C. Gravity convection offers gentle drying with heat-generated convection to move the air vertically through the chamber to heat…

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

Complete reactor system on our NEW open air, auto-center stand.  PLEASE NOTE: REACTOR STAND OVERALL HEIGHT WITH MOTOR AND CLEARANCE BELOW VALVE, ARE CALCULATED FOR ALL CHEMGLASS STIRRER BEARINGS, INCLUDING THE CG-2077-M MECHANICAL SEAL STIR BEARING. Features: New &…

…fast drying Blower circulates heated air in a horizontal airflow pattern for efficient heat distribution with tight temperature tolerances of up to ±0.5°C Gravity convection offers gentle drying with heat-generated convection to move the air vertically through the chamber to heat…