Air Sampling

Compare Tool

Select up to 3 products

Air Sampling
1 - 32 of 567
Sort
View
Show
  • Air Sampling Accessories

    Sartorius

    Accessories for MD8 air sampling devices

  • Air Sampling Cane, Straight

    Ace Glass

    Straight tube type air sampling cane with polyethylene hood and stainless steel brackets. Codes -35 & -37 feature a #7 Ace-Thred port for introducing calibration gases.

  • Miniature Air Sampling Kits

    Restek

    Restek’s passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* Kit includes flow controller, critical orifice, 2 µm frit filter, vacuum gauge, and sample inlet. The gauge and sample inlet are downsized for use…

  • Adapter, Bleed, Air Sampling

    Ace Glass

    …adapter used for reducing air flow in the Air Sampling Manifold to prevent a pressure drop across the sampling ports. Normally installed in front of the 7511 blower, in line with the manifold. Positioning of holes in threaded nylon plug controls the volume of air flow. Plug supplied with O-Ring.

  • Miniature Air Sampling Canisters

    Restek

    These small canisters are designed for controlled sampling, such as personal air sampling, as an alternative to tube and pump samplers. The 1,000 cc canister is suitable for sampling volatile organic compounds in air according to methods TO-14A, TO-15, IP-1A, ASTM 5466, OSHA PV 2120, and NJ DEP Low…

  • Tee, Air Sampling

    Ace Glass

    Sampling tee with top threaded, side and bottom tubes reduced for use with 7506 bushing.

  • Canister Air Sampling Timer

    Restek

    …designed to simplify both automated and manual air sampling. The easy-to-use keypad and graphic display facilitate the programming of up to 12 timed events. They offer the convenience of remote start/stop sampling and permit intermittent sampling throughout a test period. The LCD remains in sleep…

  • Impinger, Air Sampling

    Ace Glass

    A high velocity impinger which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is positioned 4mm above…

  • Impinger, Air Sampling

    Ace Glass

    A high velocity impinger (Ref. AGI-4) which passes 12.3 to 12.6L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary…

  • Air Sampling Sweep Elbow

    Ace Glass

    Sweep elbow, available with one end threaded, the other end reduced for use with 7506 bushing or both ends threaded for use with either 7506 bushing or 5841 coupling.

  • Whatman Grade EPM 2000 Air Sampling Filter

    GE Healthcare

    GE’s Whatman EPM 2000 air filters are used in high-volume PM-10 sampling equipment. Manufactured from 100% pure borosilicate glass, they enable detailed chemical analysis of trace pollutants with minimal interference. Air retention efficiency of 99.95 percent of 0.3 µm size particulates Selected…

  • Impinger, Air Sampling

    Ace Glass

    A high velocity impinger (Ref. AGI-30) which passes 12.0 to 13.0L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary…

  • Air Sampling Collection Bottle

    Ace Glass

    Collection bottle, usually connected to the bottom arm of the 7495 tee with reduced ends, to collect heavy particulates before they enter the manifold train.

  • Tedlar Air Sampling Bags

    SKC

    …fatigue-resistant Large sample port for flushing; three convenient eyelets These bags are fabricated from 2 mil thick PVF (Tedlar) film, a material that is inert to a wide range of chemicals. Tedlar is manufactured without plasticizers. Can be used for collecting air containing all…

  • Air Sampling Manifold

    Ace Glass

    Straight sampling manifold, available with one end threaded, the other end reduced for use with 7506 bushing, or both ends threaded for use with either 7506 bushing or 5841 coupling. Also available with adjustable depth, threaded sampling ports for use with up to 7mm O.D. tube. Code identifies I.D.…

  • AIR SAMPLING PUMP 120 V

    PerkinElmer

    AIR SAMPLING PUMP 120 V

  • Integrated Passive Air Sampling Kits

    Restek

    Restek's passive air sampling kit incorporates all the hardware necessary to collect air samples and is easy to assemble for field sampling.* The improved filter design greatly reduces the number of potential leak sites. The passive air sampling kit is available in seven sampling flow ranges and…

  • Carb Octopus Air Sampling Manifold

    Ace Glass

    The vertically mounted Carb Octopus air sampling manifold design features an inner tube which allows condensation to drip to the collection bottle and away from the #7 Ace-Thred instrument ports. Available in standard 4 or 8 port configurations.

  • Air Sampling Cane, with Funnel

    Ace Glass

    Air sampling cane with funnel at one end to avoid water droplets from collecting at edge and being sucked into manifold train. Bulge above the funnel is for glass wool or similar material to allow for filtering of particulates. Codes -22 & -26 feature a #7 Ace-Thred port for introducing calibration…

  • Grab Passive Air Sampling Kits

    Restek

    …for grab air sampling Variety of orifice sizes for fast sampling from 5 to 60 minutes Connect 1/4" compression fitting directly to canister valve inlet Replaceable frit protects orifice and valve from particulates Sample inlet design minimizes water entry into sampling train …

  • AIR SAMPLING PUMP 120 V

    PerkinElmer

  • Whatman PM2.5 Air Monitoring Membrane Filters

    GE Healthcare

    …for PM 2.5 ambient air monitoring. These high-purity, thin filters are sequentially numbered and come with chemically resistant polypropylene support rings. Robotic air sampling filter for PM 2.5 air monitoring Ambient air monitoring requires a chemically resistant air sampling filter that can…

  • Blower, Permanent Split Capacitor, Air Sampling

    Ace Glass

    …split capacitor, steel housed blower used to pull air through our Air Sampling manifolds. Blower produces 50 cfm @ 0.0 meters of water static pressure which assures a minimum pressure drop across each port in the manifold train. Free air rpm is 3030. Available in both 115 & 230v models,…

  • Soil Gas Passive Air Sampling Kits

    Restek

    … Stainless steel tee with orifice Variety of orifice sizes for sampling from 4 minutes to 10 hours 1-1/2" vacuum gauge (–30" Hg to 0" Hg) 2 µm frit filter for insertion into 1/4" compression sample inlet Air sampling canisters sold separately.

  • SilcoCan Air Sampling Canisters with RAVE Valve

    Restek

    air sampling canisters feature our unique Siltek treatment technology. Even highly active components, at low parts-per-billion concentrations, can be readily sampled and stored without loss. The RAVE valve is a high-quality, metal-to-metal seal, 2/3-turn valve with metal diaphragms to prevent sample

  • TO-Can Air Sampling Canisters with RAVE Valve

    Restek

    …valve U.S. EPA Methods TO-14A and TO-15 regulate the collection, storage, and analysis of volatile organic compounds (VOCs) using treated air sampling canisters. Restek offers a complete line of TO-Can canisters (SUMMA can equivalent), electropolished using a proprietary process and extensively…

  • Quick-Connect Fittings for Miniature Air Sampling Canisters

    Restek

    …fitting to open canister. Attach quick-connect stem protector to stem fitting when not sampling to prevent canister from accidentally opening. Connection: 1/4" tube fitting. Note: Quick-connect body fitting (cat.# 24187) must be ordered separately to sample with quick-connect stem fitting.

  • TO-Can Air Sampling Canisters with Swagelok SS4H Bellows Valve

    Restek

    … U.S. EPA Methods TO-14A and TO-15 regulate the collection, storage, and analysis of volatile organic compounds (VOCs) using treated air sampling canisters. Restek offers a complete line of TO-Can canisters (SUMMA can equivalent), electropolished using a proprietary process and extensively…

  • Tedlar® T.O. Plus Air/Gas Sampling Bags

    Environmental Sampling Supply

    The ESS Air Sampling Bag incorporates a two opening system for sampling and extraction. The side port/stem (3/16" OD) allows filling with a pneumatic pump and tubing, and for rapid emptying of the bag. The top of the valve is

  • QM-A Quartz Fiber Filters and Thimbles

    GE Healthcare

    Grade QM-A circles High-purity quartz (SiO2) microfiber filters are used for air sampling in acidic gases, stacks, flues and aerosols, particularly at high temperatures up to 500° C and in PM-10 testing. Because of the low level of alkaline earth metals, "artifact"…

  • Stainless Steel ATD Prepacked Sample Tubes, Sorbent: Air Toxics Tube

    PerkinElmer

    Stainless steel and glass sample tubes are available with a wide variety of packing materials from single to multi-bed. PerkinElmer Thermal Desorber tubes are printed with the packing material and an arrow, which points to the end of the tube where sample is drawn from, and also indicates the end…

  • Glass Prepacked ATD Sample Tubes, Sorbent: Air Toxics Tube

    PerkinElmer

    Sorbent: Carboxen 1008

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.