Agilent Septum

Compare Tool

Select up to 3 products

Agilent Septum
1 - 25 of 25
Related Categories: Rubber Septum | Ferrule | Injection Septum | Septum | Tools
Sort
View
Show
  • Inlet Wrench for Agilent 5890/6850/6890 GCs

    Restek

    Use to remove the septum nut and weldments during GC maintenance Use the smaller end to remove the septum nut Use the larger end to tighten the split/splitless weldment nut High-quality stainless steel construction Meets original equipment performance

  • Septa, Long Life GC Autosampler

    Hamilton

    Long injection life, pre-pierced for minimal coring. Maximum temperature 400°C. Long injection life septum typically achieves 400 injections without failure, when used with a rounded-tip (Agilent-style) needle and autosampler or needle guide. Ideal for standard manual-injection GC and GC/MS. 3 mm…

  • Autosampler Syringes

    Agilent Technologies

    …the lower portion at 26s gauge allows for use with split/splitless or on-column injections with 0.53 mm ID columns. All standard plungers are stainless steel. HP Point Style: Proprietary design yields optimal performance and reliability and reduces coring by parting, not cutting, the septum.

  • Septum Nut Removal Tool for Agilent 5890/6850/6890/7890 GCs

    Restek

    Easily remove the septum nut without touching the heated nut—no more burned fingers! Unique, ergonomic handle—easy to grip Nut remains in tool for quick reattachment

  • Make Life Easier (MLE) Capillary Tool Kit for Agilent GCs

    Restek

    Includes: Capillary installation gauge for Agilent GCs Inlet wrench for Agilent GCs Septum nut removal tool 1/8", 3/16", and 1/4" nylon brushes 1/4", 3/8", and 3/16" stainless steel wire tube brushes Stainless steel surface brush 6 stainless…

  • DI Glass Inserts for Agilent 5890 Packed Column GC

    Restek

    Tolerances closely controlled Can be removed from the septum nut weldment

  • Ferrule Tools

    Agilent Technologies

    …cuts can negatively affect chromatographic performance. Microprobes Hardened stainless steel microprobes are well suited for removing septum and ferrule pieces stuck in fittings. Five different styles give you all the angles for getting into hard-to-reach places. Mirror Use the…

  • Septum Nuts for use with Agilent 5890/6850/6890/7890 Split/Splitless Injectors

    Restek

    Needle guide allows easy penetration and prevents septum coring Manual injection septum nut allows use of 26-gauge needles for on-column injections Made of high-quality stainless steel

  • Septa

    Agilent Technologies

    …Septa are the preferred septum for autosamplers and are ideal for overnight runs. You can make up to 400 injections per septum and its soft 45 Durometer rating is easy on autosampler needles. Advanced green Septa are long-life, high temperature devices. Agilent offers users a high-performance…

  • Siltek Septum Packed Purge Port Weldment for Agilent 5890 GCs

    Restek

    Siltek treatment makes weldment inert and eliminates adsorption of sensitive compounds (e.g., DDT and Endrin). Order Viton O-rings and appropriate septa separately.

  • Septum Nut Non-Purging

    Agilent Technologies

  • Merlin Microseal Septa for Agilent GCs

    Restek

    …the Merlin Microseal septum include elimination of septum coring; longer life; and consistent, low needle-insertion force. The Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring and the resulting accumulation of septum crumbs in the injection…

  • FastPack Inlet Kits for Agilent GCs

    Restek

    …and carrier gas flow occlusion. Allow a new septum sufficient time to condition in the injector, to reduce the incidence of ghost peaks. To avoid contamination, always use forceps when handling septa. Why replace the inlet seal? In Agilent split/splitless injection ports, the inlet seal…

  • Replacement Inlet Seals for Agilent GCs

    Restek

    The inlet seal at the base of the Agilent 5890/6890/7890 GC injection port contacts the sample and must be changed frequently to prevent adsorption of active compounds. In addition, septum fragments and sample residue accumulate on the disk surface, requiring disk replacement. To reduce breakdown…

  • Inlet Maintenance Kit for Agilent GCs

    Restek

    …wafer 11 mm Thermolite septa 4.0 mm single taper liner 4.0 mm split liner with wool Capillary column caps 1/4" x 5/16" wrench Septum puller Installation gauge Wire cleaning brush Jet reamers/ferrule removers Inlet liner removal tool Septa nut removal tool

  • DI Uniliner Liners for Agilent 5890 Packed Column GC

    Restek

    Press-Tight taper forms dead volume free connection to column Minimizes solvent and peak tailing Use with 0.25, 0.32, and 0.53 mm ID capillary columns Can be removed from the septum nut weldment

  • Pre-Assembled, 2 mL Wide Opening Screw Top Glass Vial Convenience Packs

    Agilent Technologies

    Pre-assembled packs come ready-to-use with cap and septum of your choice attached to the vial. A time/labor-saving product for use on your Agilent Autosampler or any rotating tray automatic sampler.

  • Gold-Plated Inlet Seal (Straight Design)

    MilliporeSigma

    General description The inlet seal on an Agilent GC must be regularly changed to prevent sample adsorption due to accumulation of sample residue and/or septum fragments. Supelco manufactures replacement inlet seals using a high quality stainless steel plated with pure gold to insure inertness.…

  • Polypropylene Vials

    Agilent Technologies

    …opening glass/plastic vials have a glass flanged insert molded to the inside, so sample only comes in contact with high quality glass insert and septum. Polypropylene is chemically resistant and the material of choice for pH sensitive samples, sodium or heavy metal analyses. Polypropylene vials are…

  • Varian/Bruker GC Autosampler Syringes

    SGE

    …unique plunger design minimizes bending and seizing, and the cone tip needle point style has been developed specifically to withstand multiple fast septum injections. Select from a wide range of fixed needle and removable needle options. PTFE tipped replaceable plunger versions are available for…

  • Inlet Liner, Direct (SPME) Type, Straight Design (unpacked)

    MilliporeSigma

    …injection ports. Fits Agilent (5890, 6890, and 7890) Fits Finnigan (9001GCQ) Fits Varian (CP-1177 Injector) The liner is the second most important part of the inlet. It is the centrepiece of the inlet system, basically a glass tube between the septum and the column, where the…

  • Headspace Vials

    National Scientific

    …rim that presses into the septum for a more effective seal. Vial capacities are 6 and 20 mL and dimensions are 22 x 38 mm and 23 x 75 mm, respectively. Compatibility Flat bottom vials feature a longer neck for fit with Carlo Erba 2; and Agilent 2; units Round bottom vials…

  • 8-425 Screw Caps with Septa

    Agilent Technologies

    …recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) Open top screw caps with the 8 mm septa installed. Septa for 8-425 Screw Caps (2714S26, 2714S27,…

  • Wide Opening Crimp Top Vials

    Agilent Technologies

    …to 135°C. Can be used with crimp or snap caps. Wide Opening Glass/Plastic Crimp/Snap Top Vials (2715F86) Polypropylene body with a glass-flanged insert molded to the inside Sample contacts only the 100 µL high quality glass insert and the septum. Can be used with crimp or snap caps.

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.