Adapter Filtration

Compare Tool

Select up to 3 products

Adapter Filtration
1 - 32 of 105
Sort
View
Show
  • Used for reduced pressure filtration with 7186 style, plain stem Buchner funnels. Top is tooled to accept a pluro stopper, bottom has a joint. Serrated hose connection has a second ring of 13.5mm O.D. Inserting the recommended size pluro stopper and th

  • …pouring of your samples, and the funnel is manufactured from optically clear polystyrene. The bottle and filter adapter are manufactured from 100% virgin polypropylene. Filtration bottle tops without receiver bottles are also available. The bottle tops fit on bottles that have a 45mm neck…

  • Adapters are used for reduced pressure filtration with plain stem buchner funnels. Top is tooled to accept the listed size of pluro-stopper. Serrated hose connection has an O.D. of 10mm at the largest serration. FOR PLURO STOPPERS SEE CG-1401.

  • Adapter used for reduced pressure filtration with plain stem buchner funnels. Top is flared to accept the listed size pluro stopper. The hose connection has an O.D. of 10mm at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER, See CG-1401.

  • Adapter used for reduced pressure filtration with plain stem buchner funnels. Top has a HEAVY DUTY tooled flare to accept the listed size pluro stopper. Hose connection is 10mm OD at the largest serration. ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO STOPPER. CG-1052-A-14 Accepts up to…

  • Filtration Adapter Assembly

    DWK Life Sciences (Wheaton)

    Filtration adapter assembly makes it easier to connect standard 47 and 90mm filtration assemblies with stopper connections to a standard laboratory bottle with a GL45 thread Replaces the stopper to make the connection to the bottle A GL32 PBT cap with a PTFE faced silicone sealing ring makes…

  • Used with plain stem Buchner funnels and pluro-stopper. Hose connector has an O.D. of 10mm at the largest serration. Joint is a standard taper inner joint. Pluro-stoppers are not included.

  • Adapter used for reduced pressure filtrations using plain stem buchner funnels. Stopcock permits control of vacuum source. Top of adapter is tooled to accept the listed size of pluro-stopper. NOTE: ADAPTER IS NOT SUPPLIED WITH RUBBER PLURO-STOPPER, SEE CG-1401

  • …unit with wide base is tip-resistant Robust, crack-resistant bottle withstands cap tightening Klari-Flex offers three flexible ways of operation: Pedestal stand design for maximum convenience Cradle ring for use with existing lab stands Adapter for conventional bottle-top filtration

  • …semi-reusable membrane support collars and vacuum tube adapters (MCFLX4702) Single-Use Kit: 10 funnels with 10 single-use membrane support collars and vacuum tube adapters (MCFLX4710) All three components of the Millicup™-FLEX filtration unit are fully recyclable, minimizing your…

  • ULTRA-WARE® Filtration Caps

    DWK Life Sciences (Kimble)

    Body is constructed of glass-filled PTFE with a vacuum adapter for 1/4” ID tubing Upper screw clamp holds a solvent pickup adapter or funnel 40-60 micron porosity fritted glass filter support is removable Supplied with a PTFE/propylene o-ring

  • Borosilicate glass filtration apparatus accomodates 25mm membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

  • Borosilicate glass filtration apparatus accomodates 47mm diameter membrane filters. The new design utilizes a nylon Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base piece. The unit is easy to…

  • Borosilicate glass filtration apparatus accomodates 75mm membrane filters. The new design utilizes a PTFE Ace-Thred adapter to join the glass funnel, filter flask and fritted disc together. This design eliminates the need for the clamping device, stopper and base. The unit is easy to assemble,…

  • Filtration apparatus assembly. This apparatus differs from the standard units as it utilizes our Instatherm technology to evenly heat the upper 500mL filter funnel, thus keeping the viscous material such as polymers in the liquid state. The middle adapter and snap ring are PTFE. The interchangeable…

  • …cap, and a vacuum hose adapter. Systems with 15 mL and 50 mL polypropylene centrifuge tubes are also available. Filtration funnels are compatible with the patented Autofil pedestal, a cradle ring for use with existing lab stands, and vacuum hose adapters. All components are USP Class…

  • Filter Adapter Set, Neoprene

    United Scientific Supplies

    adapter cones designed to fit Buchnew and fritter glass funnels, porcelain filters without headpieces, and for reverse flow cleaning for filter crucibles. Adapters can be used to support funnels, Gooch crucibles, filter tubes and other apparatus in filtration assemblies These adapters are…

  • … Eliminates toxic fumes while purifying lab air Adaptable to any cabinet. Vertical and horizontal models available Audible and visual indicators to ensure the filters and fan are working properly Meets AFNOR NFX 15-211 filtration efficiency standard and ANSI Z9.5 2012 standard …

  • Fritted filter disks for Ace Membrane Filtration Apparatus. Special tight outside diameter and tolerance to fit 3702-10 and 3700-10 filter adapters.

  • Filtration apparatus for 75mm OD membranes or filter paper. Ideal for solvent recycling and other filter applications. All threaded apparatus eliminates need for clamps. Course glass fritted disc is interchangable. Gl80 wide mouth bottle with #15 Ace-Safe connector for vacuum connection on side.…

  • Adapter Assembly with GL 45 Thread

    DWK Life Sciences (Kimble)

    This adapter assembly is designed to allow connection of a 47 mm or 90 mm filtration support base with a straight drip tip to a bottle or reservoir with a GL 45 thread. Filtrate is collected directly into a media-type bottle when using a standard membrane filtration assembly  

  • Filter Adapters

    Bal Supply

    adapter sets consist of seven cones designed to fit the Buchner and fritted glass funnels, porcelain filters without headpieces, and for reverse flow cleaning of filter crucibles. Especially useful for supporting funnels, Gooch crucibles, filter tubes, etc. in filtration assemblies. The adapter does…

  • 3-Way Adapters

    United Scientific Supplies

    3-Way adapter has a 75° angle sidearm with inner joints on the sidearm and bottom and an outer joint on the top. Inclined adapter has a 105° angle sidearm with outer joints on the sidearm and top and an inner joint on the bottom. Both adapters have 24/40 joints.

  • Balloon Adapters

    SP Wilmad-LabGlass

    These Air-Tite borosilicate glass adapters are designed with a T-bore stopcock for addition or venting inert atmospheres by attaching a balloon to one of two stems. Choose from different sized Standard Taper joints and plug type. IG-22 has a 4mm glass stopcock while IG-23T has a 4mm PTFE plug.

  • …of filter crucibles Adapters will withstand autoclaving Taper angle in all sizes 17°; wall thickness is 2.5 mm in sizes 1 and 2; 3 mm in sizes 3, 4 and 5; and 4 mm in size 6 Can be used singly or nesting adjacent sizes 4584T05 adapter set consists of one adapter of each size; fits orifices…

  • Filter Adaptor Cap

    TriForest

    …designed a polypropylene filter adapter to combine the filtration options of your preferred 38-430 bottleneck filters with our rugged labware product line. It provides a leakproof alternative that increases product utility and media containment. The filter adapter is autoclavable, easy to store, use…

  • STEM RS600 Reaction Stations

    Electrothermal (Cole-Parmer)

    …over varying time delays Reflux and inerting head accessory, plus a range of accessories including rotary evaporator adapters, phase separation heads, filtration adapters, glass condensers, temperature probes, and a selection of stir bars High temperature RS600H option with temperature range…

  • ADAPTERS ARE SUPPLIED WITH PTFE DELIVERY STEM. Adapter with tooled flare top is used for reduced pressure filtration with plain stem buchner funnels. Flare accepts a #2 Pluro Stopper. ADAPTER IS NOT SUPPLIED WITH PLURO STOPPER UNLESS PURCHASED AS A KIT. SEE CG-1401 FOR STOPPER. Adapter with…

  • Elution Plate

    Zymo Research Corporation

    These clear polypropylene plates have a level footprint and conform to laboratory standards. Adaptable for use with either Silicon-A plates or Zymo-Spin I-96 filtration plates. Capacity is 350 micro liter per "V" bottom well.

  • … Flexible - highly effective clean-up from all types of fragmentation, ligation and PCR reactions Fast - eliminates centrifugation or filtration steps for fast manual processing and straightforward integration with automated liquid handling platforms Robust - bead composition specifically…

  • …vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have an 80mm long stem so that the glass vacuum adapter is not contaminated during the filtration

  • …vacuum adapters are specially designed so that the vacuum can be controlled using a PTFE stopcock to prevent the filtrates from being sucked into the vacuum line. Also, the disposable filter funnels have a 80mm long stem so that the glass vacuum adapter is not contaminated during the filtration

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.