Acetate Buffer Ph 5.0

Compare Tool

Select up to 3 products

Acetate Buffer Ph 5.0
1 - 32 of 47
Sort
View
Show
  • Acetate Buffer (1 M, pH 5.0)

    Boston BioProducts

    Components: Acetic Acid / Sodium Acetate(1 M), Water(Rest) Method: Prepared in 18.2 megohms-cm ± 1 water and filtered through 0.22-micron filter. pH: 5.0 ± 0.15 Storage: Room Temp.

  • Acetate, 1M buffer soln., pH, 5.0

    Alfa Aesar

    CAS Number: 127-09-3 Harmonized Tariff Code:  2915.29

  • Acetate Buffer (1 M, pH 5.0, Low Endotoxin)

    Boston BioProducts

    Components: Acetic Acid / Sodium Acetate(1 M), Water(rest) Method: Prepared in 18.2 megohms-cm ± 1 low endotoxin water and filtered through 0.22-micron filter. pH: 5.0 ± 0.15 Storage: Room Temp.

  • Acetate Buffer

    G-Biosciences

    Acetate Buffer at pH 5.0 and 5.5 are supplied as ready to use solutions that eliminates the calculation, formulation and weighing errors. Features Precision in pH Guaranteed reproducibility

  • Acetate Buffer, pH 4.0

    Ricca Chemical

    Formula: Mixture Description: for Residual Chlorine Analysis

  • Acetate Buffer

    Electron Microscopy Sciences

    Acetic Acid and Sodium Acetate 0.2M pH range: 3.6-5.6

  • Sodium Acetate

    MP Biomedicals

    Sodium acetate is the sodium salt of acetic acid. Sodium acetate is used as a buffer in the buffering range of pH 3.6-5.6. It is also used in the purification and precipitation of nucleic acids, protein crystallization, Staining of gels in protein gel electrophoresis, HPLC, mordant dyeing, DNA…

  • TISAB I, Standardized

    Reagents®

    Composition: Water 85.47%, Acetic Acid 5.44%, Sodium Chloride 5.27%, Sodium Hydroxide 2.73%, Sodium Citrate Dihydrate 1.09% Boiling Point: Approximately 100°C Density: 1.1 Color: Colorless liquid Physical State: Liquid pH Range: 5.0 to 5.5 Solubility Information: Miscible Shelf Life: 24…

  • TISAB II, Standardized

    Reagents®

    …Water 84.82%, Acetic Acid 5.98%, Sodium Chloride 5.80%, Sodium Hydroxide 3%, 1,2-Cyclohexylenedimaine Tetraacetic Acid (CDTA) 0.40% Boiling Point: Approximately 100°C Density: 1.03 Melting Point: Approximately 0°C Color: Colorless liquid Physical State: Liquid pH Range: 5.0 to 5.5 …

  • Ammonium Acetate

    bioWORLD

    Being the salt of a weak acid and a weak base, ammonium acetate has a number of distinctive properties. It is occasionally employed as a biodegradable de-icing agent. It is often used with acetic acid to create a buffer solution, one that can be thermally decomposed to non-ionic products. It is…

  • TISAB III, Standardized

    Reagents®

    Composition: Water 67%, Ammonium Chloride 26%, Ammonium Acetate 5%, 1,2-Cyclohexylenedimaine Tetraacetic Acid 2%, Cresol Red 0% Density: 1.13 Color: Colorless liquid Physical State: Liquid pH Range: 4.8 to 5.2 Solubility Information: Miscible Shelf Life: 24 Months Storage: Ambient …

  • Fluka Trimethylammonium acetate buffer volatile buffer, ~1.0 M, for HPLC

    Honeywell

    Chemical synonyms: Trimethylammonium acetate solution; Buffer solution 1 M pH 6.5-7.5 (volatile) Product Brand: Analytical Density (g/cm3): 1.14 Molecular weight: 119.16 Molecular formula: (CH3)3N · CH3COOH

  • SIGMA Sodium acetate buffer solution pH 5.2+/-0.1 (25 C), for molecular biology,…

    MilliporeSigma

    CAS No.: 126-96-5 MDL No.: MFCD00137248 Storage: room temp

  • SIGMA Potassium chloride 20 mM - Magnesium chloride 5 mM - Sodium cacodylate…

    MilliporeSigma

    Synonym(s): Crystallization solution 21/Fluka kit no 18839 Storage: 2-8°C

  • Deoxyribonuclease I from bovine pancreas lyophilized powder, Protein =85 %, =400…

    MilliporeSigma

    …activity. It remains active for up to five hours at 60 °C between pH 5 and 7, and loses activity in <10 minutes at 68 °C. It loses activity at the rate of 6%/hour in acetate buffer (pH 5.0) and tris buffer ((pH 7.2) at 1 mg/mL concentration. Derived from New Zealand-sourced pancreas…

  • Deoxyribonuclease I from bovine pancreas Type II-S, lyophilized powder, Protein …

    MilliporeSigma

    pH 5 and 7, and loses activity in <10 minutes at 68 °C. It loses activity at the rate of 6%/hour in acetate buffer (pH 5.0) and tris buffer ((pH 7.2) at 1 mg/mL concentration. Unit Definition One Kunitz unit will produce a ΔA260 of 0.001 per min per mL at pH 5.0 at…

  • SIGMA Tris Acetate-EDTA buffer, BioReagent, suitable for electrophoresis

    MilliporeSigma

    …can remedy the lower buffering capacity. 2 Dilution of the concentrated TAE buffer produces a 1× TAE buffer with 40 mM Tris-acetate and 1 mM EDTA, pH 8.3. The 1× TAE buffer is used both in the agarose gel and as a running buffer. Applied voltages of less than 5 V/cm (distance between…

  • Deoxyribonuclease I bovine, recombinant, expressed in Pichia pastoris, buffered…

    MilliporeSigma

    … Physical form: Supplied as a solution in 4 mg/ml glycine pH 5.0, 5 mM calcium acetate and 50% glycerol Unit Definition: One unit will produce a DeltaA260 of 0.001 per min per mL reaction mixture using calf thymus DNA at pH 5.0 and 25C Preparation Note: Produced without using any animal…

  • Insulin-like Growth Factor (IGF-I), human recombinant (culture grade), 10 ug

    Corning

    …from sodium acetate, carrier-free; reconstitute in 10 mM sodium acetate (pH 6.0) or phosphate buffer (pH 7.6); do not agitate. IGF-I, human recombinant (receptor grade) - Lyophilized from sodium acetate, carrier-free; reconstitute in 10 mM sodium acetate (pH 6.0) or phosphate buffer (pH 7.6); do…

  • SIGMA Tris Acetate-EDTA buffer, 10x concentrate, BioReagent, for molecular…

    MilliporeSigma

    …can remedy the lower buffering capacity. 2 Dilution of the concentrated TAE buffer produces a 1× TAE buffer with 40 mM Tris-acetate and 1 mM EDTA, pH 8.3. The 1× TAE buffer is used both in the agarose gel and as a running buffer. Applied voltages of less than 5 V/cm (distance between…

  • SIGMA Tris Acetate-EDTA buffer, 10x concentrate, BioReagent, for molecular…

    MilliporeSigma

    …can remedy the lower buffering capacity. Dilution of the concentrated TAE buffer produces a 1× TAE buffer with 40 mM Tris-acetate and 1 mM EDTA, pH 8.3. The 1× TAE buffer is used both in the agarose gel and as a running buffer. Applied voltages of less than 5 V/cm (distance between…

  • Proteinase K from Tritirachium album, buffered aqueous glycerol solution, for…

    MilliporeSigma

    … Physical form: Solution in 40% glycerol (v/v) containing 10 mM Tris-HCl, pH 7.5, with 1 mM calcium acetate. Unit Definition: One unit will hydrolyze urea-denatured hemoglobin to produce color equivalent to 1.0 mumole of tyrosine per min at pH 7.5 at 37 C (color by Folin-Ciocalteu reagent).

  • Quantofix® peroxides test sticks range, mg/L 0, 0.5, 2, 5, 10, 25

    MilliporeSigma

    …of the solvent. Interferences: In the pH range of 2-9 the accuracy of the determination is independent of the pH of the test solution. Buffer strongly acidic solutions with sodium acetate and adjust alkaline solutions to about pH 5-7 with citric acid. Falsely positive results can…

  • SIGMA Thermolysin from Bacillus thermoproteolyticus rokko, powder, BioReagent,…

    MilliporeSigma

    …calcium. Hydrolyzes protein bonds on the N-terminal side of hydrophobic amino acid residues. The pH optimum is 8.0 and the optimal temperature for activity is 70 °C. Considerably stable from pH 5 to 9.5. Thermolysin has a low cleavage specificity, therefore, it produces a number of short…

  • ROCHE Endoproteinase Glu-C (V8 Protease), from Staphylococcus aureus V8

    MilliporeSigma

    …presence of SH-reagents Working concentration: 1 to 5 mM Working solution: Recommended solvent is 50 mM ammonium acetate pH 4.0 (2 mg/ml). Storage conditions (working solution): -15 to -25 °C The enzyme (2 mg/ml in 50 mM ammonium acetate, pH 4.0) is stable for at least one month, frozen…

  • Endoproteinase Glu-C from Staphylococcus aureus V8, suitable for protein…

    MilliporeSigma

    …of Glu-C is dependent upon the buffer and pH employed as well as the structure around the potential cleavage site. In ammonium acetate (pH 4.0) or ammonium bicarbonate (pH 7.8), the enzyme preferentially cleaves glutamyl bonds; whereas, in phosphate buffer (pH 7.8) Glu-C will cleave at either…

  • MOPS-EDTA 10X solution

    bioWORLD

    …For RNA applications A buffer for RNA electrophoresis in denaturing (formaldehyde) agarose gels Contains: 0.4M MOPS, 0.1M Sodium Acetate, 0.01M EDTA Biotechnology Grade RNase activity: None Detected DNase activity: None Detected Appearance: Liquid PH Value: 6.8-7.2

  • NUCLEOSIL® NH2/NH2 RP HPLC Columns

    MACHEREY-NAGEL

    …chromatography of anions and organic acids using common buffers (e.g., acetate or phosphate) in conjunction with organic modifiers (e.g., acetonitrile) Pore size 100 Å Available particle sizes 3 µm, 5 µm, and 10 µm pH stability at 20 °C: 2–8 Carbon…

  • ROCHE Endoproteinase Glu-C Sequencing Grade, from Staphylococcus aureus V8

    MilliporeSigma

    …that very specifically hydrolyzes peptide bonds at the carboxylic side of Glu (in ammonium bicarbonate, pH 7.8, or ammonium acetate buffer, pH 4.0), or Glu and Asp (in phosphate buffer, pH 7.8). The specificity of Endoproteinase Glu-C Sequencing Grade is verified with the oxidized B-chain of insulin…

  • G-Sep™-50

    G-Biosciences

    …height 10 cm, column 5 cm i.d. min 150 cm/h, bed height 10 cm, column 5 cm i.d. min 150 cm/h, bed height 10 cm, column 5 cm i.d. 4 to 30°C, dry resins. Used resins 4 to 8 °C in 20% Ethanol or 0.1 M NaOH Commonly used buffers, 0.2 M NaOH, 0.2 M HCl, 1 M acetic acid, 8 M urea,…

  • G-Trap™ Ion Exchange Kit

    G-Biosciences

    …(H+)/ml Binding Capacity : 50 mg lysozyme/ ml medium pH stability Working Range : 4-12 pH stability Cleaning-in-Place (CIP) : 2-14 Maximum Flow Velocity: 450cm/h Recommended Flow rate : 1 ml/ min and 5 ml/ min for 1 ml and 5 ml column respectively Maximum Pressure : 0.3MPa …

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.