Ace Pressure Tube

Compare Tool

Select up to 3 products

Ace Pressure Tube
1 - 32 of 39
Sort
View
Show
  • Pressure Tubes

    Ace Glass

    Ace Glass pressure tubes are the premier glass pressure vessels in the industry. our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breakage under pressure. Observe all laboratory safety procedures including working behind a…

  • Pressure Tubes

    Ace Glass

    Ace Glass pressure tubes are the premier glass pressure vessels in the industry. our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace cannot guarantee glass vessels from breakage under pressure. Observe all laboratory safety procedures including working behind a…

  • Pressure Vessels, Tubes & Bottles

    Ace Glass

    Ace Glass pressure tubes and bottles are the premier glass pressure vessels in the industry. Flat-bottomed bottles are rated at 60psi at room temperature while our tubes are rated at 150psi at as much as 120 degrees C. Due to varying conditions, Ace ca

  • Pressure Tubes, Sample Port

    Ace Glass

    Ace Glass pressure tubes are the premier glass pressure tubes in the world, rated at 150 psig at 120 degrees C. Featuring a #7 Ace-Thred sample port, these tubes offer the convenience of sampling while remaining connected to the researcher's apparatus. Due to varying conditions, Ace cannot guarantee…

  • Tube, Pressure Filtering

    Ace Glass

    Used in filtering glucose, agar and serums. All porosities of a given size are priced the same. Top accepts #3 or #4 rubber stopper.

  • Gauge, Vacuum or Pressure

    Ace Glass

    With standard U shape gauge made of heavy barometer tubing and mounted on a wooden panel for vertical suspension. The scale is adjustable and accurately calibrated. Supplied with scale and tubes, but without mercury.

  • Funnel Addition, Pressure Equalizing, Jacketed

    Ace Glass

    Jacketed version of 7297 series addition funnels. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Has size D hose barbs for 3/8in ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduat

  • Sparger Tube, for Pressure Reactor, PTFE

    Ace Glass

    Sparger tube for use in #15 Ace-Thred with either ONE-PIECE or TWO-PIECE Reactors. Consists of a closed bottom, 1/2" O.D. tube with a 1/8" I.D. bore. Bottom of tube has two 3/64" holes, 90 degree apart; top has a 5/16" male thread for connecting to bot

  • Concentric Tube Column

    Ace Glass

    A high efficiency, low holdup, low pressure drop fractionating column, vacuum jacketed with observation stripe. Suitable for samples as small as 2mL. Center tube is removable for cleaning. Double expansion spiral eliminates choking. Joints are 14/20. A

  • Connectors, Tubing

    Ace Glass

    Small tubing connector comprised of a TFE, 1/4"-28 UNF 2B male nut and a Kel-F wedge insert. Designed for use with our 5838 Chromatography adapters, 1.5-2mm ID tubing won't slip off or blow out during vacuum or pressure applcations. Easily assembled wi

  • Tube, Pressure, Diehls-Adler

    Ace Glass

    Heavy wall with lip for crown cap closure. Approximately 100mL capacity, 38mm O.D. x 17.8cm long.

  • Tube, Pressure, Diehls-Adler

    Ace Glass

    Heavy wall with lip for crown cap closure. Used for polymerization and analysis of halogens by thermal decomposition in the presence of lime. O.D., all sizes, 25.4mm.

  • Flask, Pressure, Round Bottom

    Ace Glass

    Test tube, graduated with a beaded rim for standard laboratory use.

  • Connectors, Threaded, Ace-Thred

    Ace Glass

    …free machining stainless steel. For use in place of ground glass joints on flasks, columns, etc. Threads offer positive pressure O-Ring seal when used with fittings like 5837, 5838, 5840-5846, and 7506. Size mm refers to I.D. of tubing below thread. Fittings for all sizes must be ordered separately.

  • Rotameter, Needle Valve, Compact, Ace-Thred

    Ace Glass

    …degrees. Pressure tight to 2Kg/cm2 or more (air). Flow rates from 5 to 50L/minute air or 0.1 to 500cc/min water. Each tube is furnished with either a 316 stainless steel or glass float (some sizes include both), a set of average calibration curves plus/minus 5% of flow for temperature, pressure and…

  • Condenser, West, with Ace-Thred Connectors

    Ace Glass

    …#15 Ace-Thred on 6433 Reactor Head, One-Piece Pressure Reactor or any vessel with a #15 Ace-Thred. Drip tip has a bump and groove that restricts blowout when secured with 7506-06 Bushing and O-Ring. Inlet/outlet have #7 Ace-Threds for use with Ace-Safe 5853 easy connect/disconnect tubing connectors.

  • Tubing, Polypropylene

    Ace Glass

    Polypropylene tubing used to make connection between pressure source and 12517 Quick disconnect on side of Pressure Manifold and between other side of manifold the Pressure Reactor. Sold in 100' coil.

  • Stopcock Plug, Inlet Feed

    Ace Glass

    …columns. Pressure ranges vary from 0-60psi and up to 0-400psi. Gauges have different NPT end fittings and internal materials, as well as various dial ranges. Some come with nylon adapters to match to Ace-Threads, NPT threads and 1/4-UNF threads. One style comes complete with a 3-way tubing connector…

  • Feed Tube, Hose Connection

    Ace Glass

    Permits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight or bent. Hose conn. are size C. Tube is 8 mm O.D.

  • Adapter, Offset

    Ace Glass

    Adapter with #15Ace-Thred top and 14mm OD offset bottom tube with O-Ring grove. Used on small pressure reaction vessels and heads to allow for more space for columns, condensers and addition funnels.

  • Feed Tube, Luer Tip

    Ace Glass

    Permits packing of column without excessive drop impact. Also used for side arm introduction of effluent or may be used for pressurized operation. Used in conjunction with 5029 Nylon bushing. Supplied straight only. Tube is 8 mm O.D. with luer connection.

  • Still (60mm), Short Path, Low Hold-Up

    Ace Glass

    A short path still designed to be effective with high boiling point materials at low pressure where moderate foaming and slight bumping can be tolerated. A fine tip adjustable gas inlet tube can be used for stirring or as a foam breaker. One-piece cow

  • Buret, Automatic, with 1:5 PTFE Plug

    Ace Glass

    Simplified design provides greater strength, resulting in longer service life, easier repair in the event of breakage and elimination of hold-up in the immersed tube. Supplied complete with pressure bulb, polyethylene release tube and reservoir bottle.

  • Bearing, Trubore, 10mm

    Ace Glass

    …9443. By using precision bore tubing throughout the length of the bearing, a stirrer is produced that will hold to within 1mm of vacuum and withstand pressures in the flask up to 300mm. The 9532 Agitator, used with this bearing actually develops a negative pressure of 230mm water at operation…

  • Rapid Preparative Chromatography System

    Ace Glass

    …system suitable for use to pressures of 50 psig, operation behind a shield is recommended. Resevoir is 2L or 3L capacity, epoxy coated and pressure tested. Complete item includes:Brass or glass manifold, pressure gauge, pressure relief valve, column, tubing, and appropriate connectors,…

  • Impinger, Air Sampling

    Ace Glass

    …velocity impinger which passes 6L/min (corrected to engineering gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.035in capillary tip that is positioned 4mm above the…

  • Impinger, Air Sampling

    Ace Glass

    …passes 12.3 to 12.6L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary tip that is positioned 4mm above the bottom…

  • Reservoir, Solvent Netted, Plastic coated

    Ace Glass

    14 psi rated, graduated, netted clear or plastic coated solvent reservoir bottles featuring an Omnifit, 3-valve cap. Only PTFE & Tefzel wetted surfaces. Individually controlled valves permit the application of gas under pressure for venting, flushing,

  • Sublimation Apparatus, Vacuum

    Ace Glass

    …eliminate the use of grease and still avoid freezing. Kettle flange has a groove for a CAPFE O-Ring. Quick Release clamp secures head & kettle. Complete consists of Kettle Top, Kettle Bottom with O-Ring, Condenser, Stopcock Adapter, Condenser Tube, Pressure Bushing, (2) stoppers, and Flange Clamp.

  • Manifold, Vacuum, Firestone

    Ace Glass

    …Action PTFE Stopcock ports with 3/8" 0.D. Swagelok tubing connections. Each connection has an O-Ring groove (O-Rings supplied) for use with #11 Ace-Thred. Valve eliminates the need for a second tube. Shut-off float on gas side of valve prevents pressure buildup when system is purged. Plugs are PTFE…

  • Impinger, Air Sampling

    Ace Glass

    …passes 12.0 to 13.0L/min. (corrected to engineering standard gas conditions) when the pressure drop across the orifice is 41cm Hg or greater. Stopper fits 24/25 125ml bottle and features a 11mm OD center tube, 8mm OD side arm with bulge, 0.05in capillary tip that is positioned 30mm above the bottom…

  • Photo-Oxidation Apparatus, Ultra-Violet

    Ace Glass

    …carbon in organic matter and oxidation of organic nitrogen compounds. Cylindrical lamp housing contains 12, 100ml quartz sample tubes that surround a 1200w medium pressure photochemical lamp cooled by a integral fan. Power supply includes a manual or automatic 12 hour timer for programming exposure…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.