50ml Tube Holder

Compare Tool

Select up to 3 products

50ml Tube Holder
1 - 32 of 33
Sort
View
Show
  • Polystyrene construction. Leave both hands free for pipetting and other critical tasks Non-Grip Style safely supports a 50ml conical centrifuge tube and permits the tube to freely be removed Grip Style gently grips the tube and moves with the tube when it is lifted from the bench top

  • Conical Tube Holder

    SP Bel-Art

    Move tube and rack with one hand, insert or remove tube from the holder with one hand. Support either a 15 or 50mL conical tube while allowing a view of the tube’s entire contents. Steam autoclavable at 121°C (250°F). Chemical-resistant polypropylene.

  • Large scale sample holder with All-Metal construction. The TeenPrep All-Metal Adapter holds 12 x 15mL Lysing Matrix Tubes. This is the strongest FastPrep-24™ adapter, intended for the most difficult and long-lasting lysis applications. Due to its metal construction, it can be continuously run…

  • Bead Genie™ Tube Holder

    Scientific Industries

    … Bead Genie™ Vertical 6 x 15mL Tube Holder holds up to 3 50ml tubes. Requires the clamping disk supplied with Bead Genie™. Bead Genie™ Vertical 3 x 50mL Tube Holde r holds up to 6 15ml tubes. Requires the clamping disk supplied with Bead…

  • …vertical "end over end" mixing and horizontal "rolling" mixing tube holders are available for 1.5 / 2.0mL, 15mL & 50mL tubes. Features: Heavy duty metal chassis and tube holder / rotisserie accessories Digital adjustment of speed and time LCD display …

  • …rod holder with locking knob accepts optional External Temperature Probe Kit. Optional External Temperature Probe Kit monitors actual block or sample temperature. Each of the five models accepts separate interchangeable modular blocks, accommodating various tube sizes from 0.2 mL micro-tubes to 50mL

  • Vertical High Speed Microtube Holder

    Scientific Industries

    Tube Holder holds three 50mL tubes vertically. Holder snaps on to any Vortex-Genie 2 Mixer and the Vortex-Genie Pulse. Optimized for high speed vortexing a small number of tubes. No additional attachment necessary.

  • …interchangeable tube holder clips for 1.5mL, 15mL & 50mL tubes. Features: End over end motion/agitation Provides gentle and effective mixing of biological samples Adjustable speed range from 0 to 80 rpm Unit includes an assortment of twelve (12) 15mL, Twelve (12) 50mL and…

  • 50mL Multiple Tube Holders Made of epoxy-coated steel wire, these racks hold up to thirty-six 50mL centrifuge tubes in holes 30mm square. Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range -223°C…

  • …including 3 plate microplate hotel sized to accept 24 well plates Sticky mats 15/50ml combo tube holder capable of holding any combination of up to six 15ml and five 50ml centrifuge tubes Plastic clamps in 125, 250, 500 and 1L sizes Petri dish shelf capable of holding 60mm dishes…

  • The GTR-ID Tube Rotator efficiently mixes your biological samples and solutions using the included 50mL tube holder disk or the optional 1.5 / 2.0mL and 15mL disks. An industrial style metal housing with tilt adjustment ensures a lifetime of worry-free operation. Consistent tilt adjustment is…

  • The centrifuge tube holder allows shaking vertically to let gases escape, or horizontally with stoppers secured by a plate. Holder accommodates up to eight 50 mL glass centrifuge tubes and test tubes up to 28 mm diameter, 140-180 mm long (stoppered) Up to 2 holders can be shaken at once …

  • Magic Programmable Mixers

    Walter Products

    …Programmable Mixer is a combination of a variable speed rotator, and an advanced multiple tube vortex, in one machine. It can hold tubes which range from 0.2ml to 50ml, and all kinds of different tube holders can be assembled into one rack. The mixer can be used in ambient temperatures from 4°C…

  • tube holders. The Mini model is supplied with holders for 12 x 1.5ml tubes, 2 x 15ml & 2 x 50ml tubes; the standard model, 30 x 1.5/2.0ml, 8 x 15ml & 2 x 50ml tubes. For higher capacity applications, more of these holders can be purchased as accessories. In addition, horizontal holders are…

  • MagLab™ Series

    Heathrow Scientific

    …bright translucent color and features four powerful magnets for a secure hold onto most metal surfaces. MagRack™ holds four 50mL tubes and nine 15mL tubes. MagWipe™ holds a standard (11 x 21cm) Kimwipes®* box. MagPette™ holds two pipettors (fits most popular styles).…

  • Bead Genie™

    Scientific Industries

    …extraction, or homogenization applications, utilizing an aggressive vertical mixing motion. Supplied with holders to hold vertically 12 microtubes (1.5 or 2.0ml), 6 15ml tubes, or 3 50ml tubes, and 12 microtubes (1.5 or 2.0ml) horizontally. Beads are also available and sold separately for…

  • SBS 6x50ml

    Clickbio

    …version of conical tubes that are widely used in labs for cell culture and extraction applications. These automation friendly consumables replace un-standardized and unreliable conical tube holders as well as the conical bottom tubes themselves. Each part can hold 6x 50mL samples (300mL total)…

  • …procedures. 1221S04: Tube Holder holds six 50mL, six 15mL and twelve microtubes vertically. Holder snaps on to any Vortex-Genie 2 mixer and the Vortex-Genie Pulse. No additional attachment necessary. 1224N32: Tube Holder holds six 50mL tubes horizontally. Holder snaps on to any…

  • A magnetic separation unit designed to hold, and separate magnetic particles to the side of the tubes, up to six 50mL tubes. The unit contains bar magnets embedded in a plastic housing.

  • …SPB Probe provides direct control and monitoring of actual sample temperature via a corrosion-resistant, PFA-coated temperature probe. Available with different holders in a 6"configuration for use with 50 and 100 mL DigiTUBE®s. Each probe is supplied with 5 Probe Watch Glasses and a probe holder.

  • …mixing Adjustable speed range of 10 to 70rpm Adjustable mixing angle between 0 and 90° Free 50ml x 8 tube holder accessory included. Also a wide variety of accessory tube holders are available Continuous or timed operation Can be used in cold rooms or incubators 2 YEAR MANUFACTURER…

  • …protein binding, nucleic acid purification, histochemistry, hybridization etc, the mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style)…

  • CoolRack® and CoolSink™ modules

    Brooks Life Sciences

    …common lab detergents and disinfectants. Made in USA. CoolRack® tube holders accommodate a variety of tubes from 200ul through 50ml. CoolSink™ plate holders accommodate 6-, 12-, 24-, 48-, and 96-well plates and 50ml reagent reservoirs. CoolRacks® are gray in color unless noted.…

  • …and minimize maintenance downtime. Select interchangeable burette sizes of 10mL, 20mL or 50mL to customize your titrator Bottle holder helps secure titrant to prevent spills and offers flexible placement Color-coded tubing and connectors simplify tubing installation and maintenance

  • … PYREX® Stopper, (7575-14) Bleed Tube (7815-19) Adapter Tube w/ Thermometer Opening (8821-14) Rubber Thermometer Holder (7715) Vacuum Connecting Tube (8947-14 ) 3-Way Connecting Tube (9050-14) Claisen Connecting Tube (9050-14) Polyethylene Kit Box only (6949E-BO)…

  • …(6413-125) PYREX® Stopper, 7575-19) Bleed Tube (7815-19) Adapter Tube w/ Thermometer Opening (8821-19) Rubber Thermometer Holder (7715) Vacuum Connecting Tube (8947-19) 3-Way Connecting Tube (9000-19) Claisen Connecting Tube (9050-19) Polyethylene Kit Box only (6949E-BO) …

  • Organic Chemistry Set

    GSC International, Inc.

    …flask, 500ml 1 Round-bottom flask, 250ml 1 Round-bottom flask, 100ml 1 Round-bottom flask, 50ml 1 Round-bottom flask, 25ml 1 Separatory funnel, 100ml 1 Bleed tube 1 Thermometer holder 1 Thermometer adapter 1 Three-way adapter 1 Vacuum adapter 1 Claisen adapter 1 Stopper …

  • …Nitrate, 0.1M Materials needed but not supplied: Beaker, 250mL Beaker, 50mL Graduated Cylinder, 10mL Graduated Cylinder, 50mL Hot Plate Ice Labeling or Marking Pens Magnetic Stir Plate Stir Bar Test Tube Test Tube Holder Test Tube Rack Thermometer Volumetric Flask, 500mL Wash Bottle DOT Info:…

  • Rotating Mixer

    Benchmark Scientific

    …samples up to 50ml. With adjustable speed control and tilt angle, the Rotating Mixer is ideal for a variety of applications, from mixing blood samples to the preparation of homogenous dispersions. Three rotisserie tube holders are included for mixing all common laboratory sample tubes and each…

  • Roto-Mini™ Rotator Series

    Benchmark Scientific

    …including resuspension, protein binding, nucleic acid purification, etc. the mixers include interchangeable tube holders for accommodating all common tube sizes from 0.5ml to 50ml. The motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style)…

  • … 4 x 50ml conical swing out rotor for Z287-A 4 x 30ml skirted swing out rotor for Z287-A 8 x 10ml swing out rotor for Z287-A Spare 10ml holders for Z287-0810H rotor, 2/pk 7ml holders for Z287-0810H rotor, 2/pk 2 x microplate swing out rotor for Z287-A 6 x 50ml conical fixed…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.