500 Ml Filter Flask

For use in vacuum filtration applications Withstands full vacuum (to 30” Hg) With hose barb for 1/4” I.D. tubing

…PVC coating for longer product life and safety Graduated to show approximate capacity Heavy wall Autoclavable (121 °C) and resistant to thermal shock Tubulation O.D. is 10 mm on sizes up through 1,000 mL and 12.5 mm on 2,000 and 4,000 mL sizes (tubing is non-coated).

Heavy glass with side tubulation for tubing Sizes 25 mL through 4000 mL Designed from Federal Specifications NNN-F-240 Scale indicates approximate volumes Flasks are fabricated from molded heavy wall for strength and have a beaded bottom surface that prevents scratching and slippage…

6514F35 of borosilicate glass, with Standard Taper 35/25 socket mouth; without stopper or sample carrier. 6514F40 stopper fits the 500 and 1,000 mL flasks; glass hook tip on lower end; platinum sample carrier not included. Black paper sample wrappers (6514F70) absorb heat quickly for infrared…

Without tubulation blown in special molds, designed to give maximum mechanical strength Graduated to show approximate capacity Permanent white-enamel graduations and marking spots Sizes from 250 mL to 4,000 mL

…300 mL FunnelThe Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask…

… ASTM Specification E 1406, Type I With capacity scale 250 mL flasks take rubber stopper No. 6; 500 mL flasks take No. 7; 1,000 mL flasks take No. 8; 2,000 mL flasks take No. 9; 4,000 mL flasks take No. 12. Flasks are fabricated from molded heavy wall for strength and have a beaded…

…the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent blue enamel marking spots. The filtering flask is designed to ASTM E-1406 Type 2. Heavy Wall Filtering Flasks These PYREX® VISTA™ filtering flasks…

…The recessed polypropylene filter support provides sufficient clearance so the membrane will not tear when the funnel is secured to the base. Funnel and base connect with a simple twist of a hand. Graduated funnels available in 300 mL, 500 mL wide mouth, and 800 mL capacities. All models are…

…syringe filters. Tubing adapter can be stuffed with cotton for sterile venting; accepts 1/4” to 5/16” (6 to 8 mm) i.d. vacuum tubing. 4618N60 funnel and receiver volumes are 250 mL. Dimensions: 180 mm H x 110 mm o.d. 4618N70 funnel and receiver volumes are 500 mL. Dimensions:…

Perform cell culture expansion and experience 500cm 2 total growth area within the footprint of a standard flask using Thermo Scientific™ Nunc™ TripleFlask™ Treated Cell Culture Flasks. Total culture area is achieved by way of the three parallel layers and a straight neck design…

…suspended above bottom of flask. Access to contents of assembled flasks provided by screw-cap side arms, attached at offset angle to allow insertion of pipet or probe without striking impeller shaft. Side arms are 9 mm i.d. and are suitable for decanting, filtered vent, inoculation, installation…

…calibrated to deliver at 20C. Durable ring marks resilient wear. Supplied with standard ground  polypropylene stopper. Certified Class B tolerance per DIN ISO 1042 Specifications: Volume: 500ml Accuracy +/- Ml: 0.40 Height: 270mm Stopper Size: 19/26 Case Quantity: 2  

…pump. Accessory racks can be substituted for automatic samplers. Without vacuum source, vacuum tubing or vacuum trap. Normally, a 500 mL or larger vacuum filter flask is used as trap. Extraction columns are prepacked with sorbent (not included; see 8330D04, etc). For replacement collection tubes,…

…Culture Flasks Sterilized by gamma radiation Of clear polystyrene, treated for improved cell attachment and growth Of high optical clarity and are individually leak-tested 9381T30 Flask has black, rim-seal, screw cap of melamine resin with PVC liner. 9381T55 and 9381T80 Flasks…

Individually calibrated to deliver at 20C. Durable ring marks resilient wear. Certified Class B with individual ring marking per DIN 122664. Supplied with screw cap. Specifications: Volume: 500ml Accuracy +/- Ml: 0.40 Height: 270mm Thread: 25 Case Quantity: 4

…aluminum clamp, fritted glass support base and filtration flask. Joints are Standard Taper 40/35. Recommended when filtering viscous or proteinaceous solutions to give the maximum flow rate Produces an ultra-clean filtrate Two filter sizes available: 47 or 90 mm Stainless steel…

…directly into EX-CELL VPRO from serum-free media with little or no adaptation. PER.C6 cells can be grown as suspension cultures either in shaker flasks or roller bottles, with roller bottles being the preferred culture system. Suspension cultures can be maintained, without refeeding, for…

One-step filtration funnel Activated carbon matrix Fits most stand laboratory flasks and bottles The Extractor system is a one-step filtration funnel device for the rapid removal of ethidium bromide from gel-staining solutions. This disposable unit contains an activated carbon…

…is used for autoclaving with the filter in place and is designed to handle up to 500 mL of sample liquids for the analysis of particulate or microbiological contamination. Supplied with a 40-60 micron porosity PTFE-faced fritted glass support base, a 300 mL PTFE-faced graduated funnel, an…

…Large with 200 mL flask (4406K70) Extraction chamber 47 mm i.d. x 150 mm usable depth Condenser joint Standard Taper 55/50; extraction tube top joint Standard Taper 55/50; bottom joint Standard Taper 24/40 Takes 45 x 130 mm thimble Extra Large with 500 mL flask (4406K94) …

…filter acidic solutions at a higher flow rate. Available in four graduated funnel capacities 100, 300, 500, or 1000 mL. The No.8 silicone stopper mounts in a standard 1L vacuum filter flask or manifold cup. The optional 2" glass extention allows for physical separation of the 47mm filters…

…graduated funnel capacities 100, 500, or 1000 mL. The 13mL/100mL  features a two-part ground glass funnel for concentrating samples. The 13mL micro funnel mounts directly over the membrane. The No.5 silicone stopper mounts in a standard 125mL filter flask. Unit includes: Funnel, Sintered…