50 Ml Conical Centrifuge Tube

Translucent, polypropylene, graduated, in styrofoam racks. Screw-on caps provide firm, leak-resistant fit.

…Materials: Corning centrifuge tubes are available in two standard materials: polypropylene (PP) and polyethylene terephthalate (PET). Polypropylene tubes provide excellent chemical resistance and mechanical strength. They are strong, moderately rigid, and well-suited for most disposable centrifuge…

…conical tube with the higher sealing capability of an Oak Ridge tube. Thermo Scientific™ Nalgene™ Conical Oak Ridge Graduated Polypropylene Centrifuge Tubes can spin up to 50,000 x g in a refrigerated or non-refrigerated centrifuge, conical tube adapter required. Capacity: 35 mL…

…of specimens at -80°C (15 to 225 mL polypropylene tubes) The most dependable tube in the lab, Falcon conical tubes are easy-to-use, high quality tools to protect your precious samples. State-of-the-art design and manufacturing create tubes engineered to provide high strength, wide…

50 mL Conical Tubes

…15 mL and 50 mL conical tubes manufactured from high-clarity polypropylene. Features dark imprinted graduations and a large white writing area for sample identification. Flat polyethylene cap also provides another opportunity for labeling. Available in sterile bulk and racked versions (50 mL…

Conical Centrifuge Tubes – developed with researchers in mind: Premium, high quality conical tubes developed for functionality, flexibility, and ease of use in the lab Environmentally friendly: recyclable plastic rack reduces waste in the lab Reduced contamination risk: New…

Rotor for high-speed centrifugation of tubes up to 50 ml Aerosol-tight rotor lid for all applications involving hazardous samples Maximum speed: 16,639 x g (11,000 rpm) or 20,130 x g (12,100 rpm) when used in Model 5810 R Rotor features a unique “quick-lock” closure for fast and…

…shut off imbalance detection system. The Corning LSE Compact centrifuge is cold room compatible. Capacity of 12 x 15 mL or 6 x 50 mL rotor Maximum speed 6,000rpm/4,185 x g Accepts both conical and round bottom tubes Space saving footprint Rotors are sold separately.

…50 mL Tube has white enamel graduations upward from tip to 10 mL in 0.5 mL divisions and from 10 to 50 mL in 1 mL divisions Tube length is 135 mm, o.d. 28 mm Round bottom tube with pour out spout for easy decanting Wall thickness approximately 1.5 mm; length 116 mm; o.d. 29 mm Fits 50…

Holds two sizes of conical bottom tubes Polystyrene foam racks are designed to hold Corning 15 and 50 mL conical bottom plastic centrifuge tubes in the same rack.

…Popular self-standing tubes are available in 50 mL only. Black Tubes are made from superior polypropylene material and are specific for light-sensitive samples. Large writing area and imprinted graduations are in white for easy readability. Black tubes in 15 mL and 50 mL are available in sterile…

Accommodates 6 x 15 ml or 6 x 50 ml conical tubes Speed up to 7,197 x g (7,830 rpm) Includes 6 adapters for 15 ml conical tubes and 6 adapters for 50 ml conical tubes; 50 ml adapters accommodate skirted tubes

…for high-speed molecular biology applications in tubes from 0.2 mL to 50 mL High centrifugation speed of up to 22,132 x g (14,000 rpm) Aerosol-tight Eppendorf QuickLock® caps and lids allow fast and ergonomic lid locking Centrifuge lid with soft-touch lid closure Quiet operation…

…-9 to 40°C temperature range Centrifuge is ideal for low-speed spinning (up to 3,000 x g) of tubes ranging in volume from 1.1 to 85 ml. The space-saving footprint and innovative design accommodates 30 x 15 ml round-bottom tubes or 20 x 15 ml conical tubes. Automatic, motorized locking lid…

Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…

These 100mL PYREX® conical centrifuge tubes have white graduations and are used in accordance with standard methods of testing for water and sediment in petroleum products. These tubes are graduated upward to 0.5mL in divisions of 0.05mL; from 0.5mL to 2mL in divisions of 0.1mL; from 2mL to 3mL…

…to centrifuge. Clarified polypropylene resin construction provides chemical-resistance, low protein binding and visibility of contents. Improved tube and cap design increases mechanical strength to withstand aggressive centrifugal forces. The 15 mL tube has a mximum RCF of 8500 x g while the 50 mL…

…hydrocarbons, except xylene and ketones. Note: Polyethylene PE closure only recommended to 80 C 95kPa. Compliant Molded-In Graduations. Suitable for use in freezers and water baths. Specifications: Material: Polypropylene Co-Polymer Conical Bottom Size: 50mL Tray Pack: 20 Case = 480

…50 mL must be prepared, centrifuged, mixed, or stored, researchers often have no choice but to use traditional conical screw cap tubes with a volume of either 15 mL or 50 mL. This dilemma is now resolved by the new Eppendorf Conical Tubes 25 mL. They have the same diameter as the 50 mL conical tube…

These 15mL PYREX® conical centrifuge tubes have white enamel graduations for durability. The 15mL size is graduated upward from the tip in 0.1mL divisions. The 50mL size is graduated upward from tip to 10mL in 0.5mL divisions, and from 10 to 50mL in 1mL divisions. The phenolic 15-415 GPI…

…well as for sample preparation protocols in microbiology and molecular biology laboratories. Whether centrifugation, mixing, or other applications – the Eppendorf Conical Tubes 15 mL and 50 mL will perfectly fit into your workflows. New cap design: flattened and grooved sides …

…Autoclavable (122°C) and freezable (-80°C). These racks are designed for Labcon centrifuge tubes, other tube brands may not fit correctly. 25 Place Holds 50 mL conical centrifuge tubes Includes numbered wells Racks lock together to form work stations Replaces disposable…

…Z11.16, Z11.30; Federal Test Method Standard No. 791, methods 310.4, 5412.2, 3003.5 Capacity 100 mL Graduations: from 0 to 1/2 in 1/20, from 1/2 to 2 in 1/10, from 2 to 3 in 1/5, from 3 to 5 in 1/2, from 5 to 10 in 1, from 10 to 25 in 5 and at 50, 75, and 100 Dimensions: 37 mm o.d. x 200 mm L.

…& 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes per rack…

The Oxford Lab Product line of Conical Tubes are designed to provide unsurpassed quality at an affordable price.   All Oxford Lab Products 50 and 15mL conical tubes are: Graduated with high-contrast black graduations for easily volume determination Made of ultra-clear premium…

…greater mechanical strength Capacity 100 mL Stem has white graduations from 0 to 1.5 mL in 0.1 mL divisions; body is graduated from 1.5 mL to 5 mL in   0.5 mL divisions, from 5 mL to 10 mL in 1 mL divisions and at 15, 20, 25, 50 and 100 mL . Dimensions: O.D. 43.5 mm to 44.5 mm…

The TPP 50 mL and 15 mL Centrifuge Tubes are compatible with all standard centrifuges and their innovative design focuses on a tight seal, excellent transparency, clear graduations, and highly visible marking areas. The yellow screw cap closure on the TPP Centrifuge Tubes is tight and protected…

…50 mL Heavy-duty tube useful for handling of sputum specimens and clinical and microbiological tests Includes phenolic screw cap which has glued-in, white rubber liner 29 x 125 mm. For replacement cap, see Thomas number 2388B73. 2620L52 Heavy wall construction, short conical…

6-position tube rack for 50 ml centrifuge tubes with conical bottoms. SBS compliant.

Uniform glass distribution in the wall, taper and bottom of these 50mL PYREX® conical centrifuge tubes provides improved mechanical strength, prevents the formation of failure-causing stress regions during centrifuging and insures the highest degree of ac

…and on an angle facing the user. Angled rack is also useful for draining excess supernatant fluids from pellets. Each rack holds eight 50 mL conical tubes or other vessels up to 30 mm in diameter. To keep samples off the bench but still immediately available, the rack can be attached to the…