5 Ml Tube Racks

Compare Tool

Select up to 3 products

5 Ml Tube Racks
1 - 32 of 89
Sort
View
Show
  • 5 mL Centrifuge Tube Rack

    Bel-Art Products

    Designed specifically for 5ml centrifuge tubes, including Eppendorf* brand, this rack will also accommodate other tubes with a diameter of 13-16mm. Made of durable and corrosion resistant white polypropylene plastic End plates have handles for easy transport and stacking Top shelf…

  • 5mL Screw Cap MACROcentrifuge Tubes

    Globe Scientific

    …same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination since there…

  • The MultiRack™

    Simport

    …on each side of the rack will ensure a safe grip when carrying it around. Interlocking feet allow stacking. Series S600-13 will accommodate all tubes up to a diameter of 13 mm while series S600-16 will accept tubes up to 16 mm in diameter including 15 ml centrifuge tubes. Model S600-30 is perfect…

  • 100-Place Microtube Freezer Boxes & Racks

    Labnet

    …Polypropylene construction Will not degrade or absorb moisture Withstand freezing (to -80°C) and autoclaving Boxes hold 100 1.5/2.0 mL microtubes. The translucent lid is alphanumerically labeled for easy sample identification. A three-point hinge maintains its integrity during…

  • Rack Tube 5mL 12mm 12 Pos

    Labconco

    …hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 12 each 5 ml microcentrifuge tubes, 12 mm in diameter Overall dimensions (w x d x h): 2.0 x 5.0 x…

  • Freezer Storage Racks

    SSI

    …accommodate all 1.5/2.0 mL microtubes and standard 2.0 mL cryo vials. Lids have raised edges to allow safe, non-slip storage of multiple racks. The racks are alphanumerically matrixed with the markings hot-stamped into the grid in a distinctive, contrasting color to the rack. A frosted writing panel…

  • 4-Way Flipper Racks

    MBP

    … Regardless of the support position used, the 2 x 7 in. or the 3 1/2 x 8 in. format is small enough to be used under the hood or on the benchtop. Rack will hold four 50 mL conical tubes, twelve 15 mL conical tubes, thirty-two 1.5/2.0 mL microcentrifuge tubes and thirty-two 0.5 mL microtubes.

  • Tube and Cuvette Racks

    Eppendorf

    …Eppendorf Tube Racks and Eppendorf Cuvette Rack Benchtop racks are essential laboratory accessories for efficient processing, transport, and short-term storage of sample preparation tubes, cryogenic tubes, and cuvettes. The comprehensive Eppendorf Tube Rack and Eppendorf Cuvette Rack system…

  • 1.5-2.0 mL Microtube Rack, holds 70 tubes

    Thomas®

  • Nalgene Cryoboxes

    Thermo Scientific Nalgene

    Ultra-low temperture storage of internally and externally threaded vials White polycarbonate box usable from -196°C to +121°C Transparent lid with molded-in numbers and coded grid Holds 81, 5 mL size vials. Overall 133 x 133 x 95 mm high.

  • Cube Rack

    Heathrow

    …colors Solidly constructed cube rack accommodates four 50 mL tubes, ten 15 mL conical tubes, twelve 12 x 75 or 12 x 100 tubes or sixteen 1.5-2.0 mL microcentrifuge tubes. Rack slides together on any side allowing the user to work with different tubes on as many connected racks as desired.

  • IsoFreeze® Color-Changing Racks

    SSI

    Racks take the guesswork out of sample preparation. Maintain sample temperature below 4°C for up to 3 hour (with lid on, at room temperature) Innovative color-changing material indicates when rack is approaching 7°C IsoFreeze® MCT holds 0.5, 1.5 and 2.0 ml tubes.

  • Snap Together 128-Place Racks for 1.5mL and 2.0 mL Microtubes

    Globe Scientific

    Reinforced polypropylene (PP) is autoclavable Shipped flat to save shelf space and quickly assembled when needed Dimensions (L x W x H): 270 x 130 x 30 (10.6" x 5" x 1.2")

  • Magic Touch™ Rectangular Floating Tube Racks

    Bel-Art Products

    …and odors, and unbreakable under normal use conditions Fits Magic Touch™ Ice Pans - Midi, 1 rack; Maxi up to 3 racks 36 places (1.5 ml tube racks) or 24 places (15 ml tube racks) 9 1/4 x 4 1/4" (23.5 x 10.8cm) * Sale price valid only on current stock. Additional…

  • 4-Way Flipper® Racks

    SSI

    …colors allow racks to be color-coded by experiment or user. Small racks (Thomas numbers 9259D30 through D48) can hold four 50 mL conical tubes; twelve 15 mL conical tubes; thirty-two 12-mm diameter tubes or 1.5/2.0 mL microtubes or thirty-two 0.5 mL microtubes. Small rack footprint is 2”…

  • Microtube Storage Box

    Thermo Scientific Nalgene

    …up to fifty 1.5 mL microtubes. Usable temperature range -150° to +121°C. Gridded lid permits easy inventory control and can be written on with marker for box and tube identification. 2591C69 takes 84 - 0.5 mL tubes; 2591C73 takes 64 - 1.5 mL tubes. Dimensions: 5 1/4” L x 5 1/4” W x…

  • IsoFreeze® Flipper® Temperature Maintenance Racks

    SSI

    …of 0°C on the bench for a minimum of five hours. Model 5152G78 maintains a temperature between -10°C and -20°C on the bench for up to three hours. Both racks can accommodate up to twenty 1.5/2.0 mL microtubes or screw cap tubes on one side or twenty 0.5 mL tubes on the reverse/flip side.

  • 96 Well Flipper Microtube Racks

    MBP

    The Flipper microtube rack is designed to hold either 96 0.5 mL or 96 1.5/2.0 mL style microcentrifuge tubes. Rack is reversible with one side suitable for larger tubes and the other side for smaller tubes. The Flipper is fitted with a clear polypropylene lid and both sides are labeled in…

  • Adapt-A-Rack®

    Heathrow

    …mm (5 - 50 mL) tubes sizes and holds them in a firm upright position. Made from POM Holds different sized tubes in each slot Racks can be linked together for additional holding capacity Open sides allow for label viewing Flat base to hold tubes upright Linked racks should…

  • Chain Tube Rack

    Heathrow

    …can configure a tube rack to meet your requirements instead of the other way around. The Chain Tube Rack has a unique linkable design that enables the possibility of multiple configurations to form different shaped tube racks. Each well has the flexibility to hold 5 mL tubes on one side or…

  • 5mL Snap Cap MACROcentrifuge Tubes

    Globe Scientific

    …same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination since there…

  • 96-Well Reversible Rack

    Heathrow

    …handling and storage Flip polypropylene rack from 96 wells for 0.5 mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are separated by molded-in grid lines,…

  • Puzzle Rack

    Heathrow

    …and 50 mL test tubes. . Imprinted references aid with easy retrieval of tubes. Bold assorted colors: yellow, blue, green and orange for quick identification. Constructed of robust polypropylene. Autoclavable . Each rack measures 151 x 135 x 66mm. Pack of 4. 10% of the proceeds of Puzzle Rack

  • Interlocking 20-Place Tube Racks

    Heathrow

    …several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to be held…

  • Magic Touch™ Round Floating Tube Racks

    Bel-Art Products

    …allows racks to rest firmly and steadily in the bucket Expanded Polymer Foam is chemical-resistant, impervious to moisture and odors, and unbreakable under normal use conditions Fits Magic Touch™ Ice Buckets 44 places (1.5 ml tube racks) or 30 places (15 ml tube racks) 8 1/4"…

  • Eppendorf Tube® 5.0 mL System

    Eppendorf

    …the Eppendorf Tube 5.0 mL. This product fills the gap between existing tube versions and enables the simple and safe processing of sample volumes up to 5.0 mL! Same diameter and bottom shape as a 15 mL conical tube—allows for use in existing adapters and racks Made from a…

  • ChillBlock™ Microcentrifuge Tube Racks

    Simport

    …Microcentrifuge Tube Racks are available in five models with 6 to 96 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml

  • 5mL, 15mL, 17mm Tube Racks & 10-17mm Tube Rack

    Heathrow

    …the rack Molded grid on both sides of the shelves for quick sample identification and retrieval Autoclavable US Patent Pending Multi Tube Rack The Multi-tube rack is designed to hold 5, 10, 15 mL tubes (or any tube between 10-17 mm in diameter).  The rack design…

  • 1-Well Racks

    Heathrow

    …of 5. Molded circular base ring keeps conical or round-bottom tubes in place. Interlock polypropylene racks to form a line of 50 mL tubes, or use as a single, stand-alone rack. Autoclavable. Assorted colors: one each of blue, green, yellow, pink, and orange. Measure 83 x 70 x 67 mm. Pack of 5.

  • Magic Touch™ Rectangular Floating Tube Racks

    Bel-Art Products

    …and odors, and unbreakable under normal use conditions Fits Magic Touch™ Ice Pans - Midi, 1 rack; Maxi up to 3 racks 36 places (1.5 ml tube racks) or 24 places (15 ml tube racks) 9 1/4 x 4 1/4" (23.5 x 10.8cm) * Sale price valid only on current stock. Additional…

  • Snap-Together Conical Tube Rack

    Heathrow

    For 15- and 50mL tubes Easy-to-assemble polypropylene racks snap together securely. Designed for stable use in water baths. Features alphanumeric grid reference aids for tube identification. Shipped flat. Wells for 15 mL tubes measure 17 mm dia; wells for 50 mL tubes measure 28 mm dia.

  • 32 Well Flipper® Junior Racks

    SSI

    …the rack has 32 wells for 0.5 mL tubes plus an additional 8 wells across for 1.5/2.0 mL tubes. The reverse/flip side has the opposite configuration of 32 wells for 1.5/2.0 mL tubes and 8 wells for 0.5 mL tubes. The Flipper rack is complete with a clear polypropylene lid to protect tubes and samples…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.