30 Mm Test Tube

Compare Tool

Select up to 3 products

30 Mm Test Tube
1 - 32 of 55
Related Categories: Test Tubes 10 Mm | Test Tube 100 Ml
Sort
View
Show
  • Unwire Half-Racks For 25 mm Test Tubes

    Thermo Scientific Nalgene

    …to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks’ thermal properties allow for both autoclaving and freezing. The three-tier design is molded in one-piece, and the lower tier is suitable for 28 and 30 mL Nalgene® Oak…

  • …Large racks (Thomas numbers 9259D51 through D66) can hold eight 30 mm diameter tubes (e.g. 50 mL conical tubes); twenty 20 mm diameter tubes; twenty-four 16/17 mm diameter tubes (e.g. 15 mL conical tubes); or forty 12/13 mm diameter tubes. Large rack footprint is 3 7/8” x 7 3/4”.

  • Unwire Half-Racks For 30 mm Test Tubes

    Thermo Scientific Nalgene

    …epoxy coating to chip or scratch Assorted colors available Racks are molded in one-piece in a 3 x 3 array. The three-tier design has letters and numbers to identify tube locations.The racks’ thermal properties allow both autoclaving and freezing. Racks can hold tubes up to 30 mm diameter.

  • Round Ice Bucket Test Tube Racks

    Bel-Art - SP Scienceware

    …Racks can also be used in water baths as floating racks. Models 6106A52 through A54 have 30 large holes (17 mm dia.) that accommodate 15 mL conical tubes or 13 mL Falcon® tubes, as well as other test tubes with similar diameters. Model 6106A62 has 44 small holes that accommodate 1.5 mL tubes.

  • Takes one test tube rack containing capped or stoppered tubes from 75 to 200 mm long Use existing test tube racks up to 12" x 5" (305 x 127 mm) Rack is secured in holder by lid which fits over threaded end posts and is adjustable in height above support platform. Knurled nuts are used…

  • Tube Test 19 X 150mm Cs576

    DWK Life Sciences (Kimble)

    KIMAX-51 tube made from N-51A borosilicate glass tubing with a sturdy lip and uniform wall thickness for maximum heat transfer and chemical resistance. Tube is without a marking spot.

  • …giving rapid results. The samples can be measured in either standard or semi micro 10mm pathlength cuvettes or in 16mm diameter test tubes (adapters for 10/12 mm test tubes are available). Available in mains only or mains /internal rechargeable NiMH battery versions. Low maintainance -- This…

  • Test Tube, 16 X 100 mm

    Agilent Technologies

  • GENESYS™ 30 VIS Spectrophotometer

    Thermo Scientific UV-Vis

    …and 5 disposable plastic cuvettes Optional: Direct connect thermal printer, Sample compartment holders for test tubes and long path cuvettes Accessories for GENESYS 30 1182H19 Test-Tube Holder Accomodates one test-tube from 12mm OD to 25mm OD Comes assembled in a…

  • OneRack® Multi Tube Rack

    Heathrow Scientific

    tube rack designed for use with a multitude of tube diameters and heights. Holds virtually any brand tube 10-30 mm of varying heights. Interchangeable tube rack inserts hold multiple tube sizes firmly in place to assist technicians constanty alternating between sample vessels Tube rack…

  • …or hood space, and will even fit in a hotcell. Containers - use 20/30/40 mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a…

  • Tube Culture 19 X 150mm Cs576

    DWK Life Sciences (Kimble)

    Borosilicate glass tubes with fire-polished top rims and uniform wall thicknesses for maximum heat transfer and chemical resistance. The 6 x 50 mm size is often referred to as a “Durham tube” No marking spot Designed from ASTM Specification E982, Type IV requirements …

  • …the user. Angled rack is also useful for draining excess supernatant fluids from pellets. Each rack holds eight 50 mL conical tubes or other vessels up to 30 mm in diameter. To keep samples off the bench but still immediately available, the rack can be attached to the underside of a shelf using…

  • Disposable, Polystyrene Culture Tubes

    Thermo Scientific Nunc

    Size 75 x 12 mm Of clear polystyrene Total volume 5 mL Working volume 4.0 mL Tube is packaged under aseptic conditions in sleeves of 100, 30 sleeves to a case. Without stopper; see Thomas number 9219R30 for stopper.

  • …attractively designed test tube shaker with touch function and infinitely adjustable speed from 1000 – 2800 rpm. Designed for mixing small test samples. Small, compact and reliable For small containers up to 30 mm in diameter, e.g. test tubes, centrifuge tubes, Eppendorf beakers Infinitely…

  • …or hood space, and will even fit in a hotcell. Containers - use 20/30/40 mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a closed…

  • Vortamix™ Mini Vortexer

    Argos Technologies

    tubes quickly and easily. The vortexing motion is activated by placing a tube on the gasket cap and then pressing down lightly. The innovative design of the gasket cap allows centrifuge and test tubes up to 30 mm in diameter to be mixed with very little effort – including 50mL conical tubes!

  • Made of acetal polymer A newly designed tube support that can be used all around the lab. The MultiRackTM is available in three models to accommodate a full range of laboratory test tubes and centrifuge tubes up to 30 mm in diameter. Although it is one of the most attractive racks available…

  • …full-size racks. Test Tube Rack Clamps: Clamps securely hold test tubes of 13, 16, 20, 25 and 30 mm. Racks contain a polyethylene foam insert to hold tubes tightly and prevent them from spinning. Inserts can be removed when not needed. Microcentrifuge Tube Rack Clamps: Securely holds…

  • 1-Well Racks

    Heathrow Scientific

    …fits tubes from 27.5 to 29.0 mm in diameter. Both racks hold conical- or round-bottom tubes. Friction-fit rack measures 92 mm dia x 30 mm H. Coated wire rack measures 90 x 67 x 67 mm. Friction-fit racks sold in pack of 5. Molded circular base ring keeps conical or round-bottom tubes in place.…

  • …needed to perform 30 tests: thirty ampoules, thirty cadmium foil packs, 3 mL syringe, 25 mL sample cup, reaction tube with lid, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell.…

  • …perform 30 tests (except distilled water): thirty ampoules, thirty cadmium foil packs, 25 mL sample cup, reaction tube with lid, 3.0 mL syringe, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable of accepting a 13 mm diameter…

  • …or hood space, and will even fit in a hotcell. Containers - use 20/30/40 mL scintillation vials, 1.6 mL Eppendorf tubes, 4 mL (1 dram) vials, or 16 mm x 100 mm test tubes The Centrifan PE uses self-generating blow-down technology to evaporate samples without a vacuum pump within a…

  • Tube Holder, holds up to 9 each (15 ml) 17 mm x 120 mm tubes. Fits inside 750 ml or larger flask. Stainless Steel. Holds tubes in upright position (tubes and glassware not included). Tube Holder for 50 ml Tubes (1177K33): Tube Holder, holds up to for 4 each (50 ml) 30 mm x 115 mm tubes.

  • …everything needed to perform 30 tests: thirty ampoules, thirty cadmium foil packs, 25 mL sample cup, reaction tube with lid, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable of accepting a 13 mm diameter round cell.…

  • …and innovative shaker that handles small containers up to 30 mm in diameter. It is compact (100 x 70 mm) and provides excellent mixing action. Fixed speed is 2800 rpm and shaking stroke is 4.5 mm. The upper casing and test tube surface are made from inert plastic. Unit includes light 12V…

  • Babcock Bottle

    DWK Life Sciences (Kimble)

    Reading in 1/100 mL divisions, with auxiliary filling tube Size 50/100% ( 1/2%), 18 grams; length 165 mm Also qualified for use in Babcock method for fat in buttermilk

  • …in a Ø 22 mm test tube simultaneously, whilst ECO 25 can process 25 samples in Ø 16 mm test tubes simultaneously. They come complete with a test tube cover for increased safety and reliability. Five different temperatures (70, 100, 120, 150 and 160 °C) and four analysis times (30 , 60, 120 minutes…

  • LAUDA HYDRO

    Lauda

    …20 openings Ø18 mm Stainless-steel test-tube rack with 5 openings Ø 31 mm Stainless-steel test-tube rack with 20 openings Ø 13 mm Test tube rack for max. 243 tubes 160 x Ø 16/17 mm Test tube rack for max. 63 tubes 160 x Ø 25-30 mm Mike Bottle Rack 12…

  • …hold tubes 10 to 18 mm in diameter and 15 spring clips to hold tubes 20 to 30 mm in diameter. Clips permit tubes to be inserted radially from the side rather than the top, reducing chance of breaking tubes. Standard clips can be replaced by 8293Q30 Clips, not included, for use with tubes 21 to 26 mm

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.