30 Ml Vial

A finer specimen of container. Evergreen’s 20 & 30 ml vials are constructed of high-clarity polypropylene copolymer with precision sealing high density polyethylene screw caps. These vials have a widemouth opening for ease of use. The clarity of polypropylene material provides for clear…

…x 30 mm high. 90-Hole Scintillation Vial Rack Similar to 9720E10 Takes 90 vials up to 17 mm o.d. or 16 mm culture tubes No inserts required Overall dimensions: 170 x 320 x 30 mm high Chemically-resistant polypropylene rack can accommodate forty-eight 15-mm o.d. chromatography vials …

20 mL, 30 mL, 40 mL and 60 mL vials in clear and amber glass of 1st hydrol. class glass Bonded Silicone/PTFE closures, thread design 24-414, open/closed top, most frequently used in combination with the 40 mL vial Vial container available for 20 mL, 30 mL and 40 mL vials. Vials are packed…

This 24-position autosampler sample rack features square holes, with side length of 25.2 mm, designed for 30 mL vials. Rugged racks are molded of autoclavable polypropylene. Footprint dimensions fit many different auto samplers. Each rack features end plates for labeling as well as numbered and…

… 1.5 mL Wide Opening Crimp Top High Recovery Glass Vials (2714Q59 and S49) 1.5 mL Vials with 30 µL reservoir For sample concentration and injection without transferring to microvolume inserts. Crimp Top Vials with Fixed Inserts (2715G02) Crimp Top Extreme Recovery Vials (2714U76)…

…Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . High Recovery vials are wide opening, 1.5 mL with a 30µL reservoir. Perform sample concentrations and injections in one vial. Allow virtually total recovery of the sample.

The C&G 40 mL precleaned VOA (volatile organic compound) vial is mainly used in research laboratories or in chemical industries. It is suitable for use with autosamplers, solid cap and liners for analysis. This B1/BC/ASC vial comes with a which ensures tight sealing of sample.

20mL vials have a wide-mouth opening for ease of use and an octagonal-shaped base which locks into our special tray for easy one-handed capping and un-capping. Polypropylene co-polymer (PPC) is nearly transparent. Polyethylene (PE) caps have molded-in sealing rings for virtually leak-proof seals. 30…

25 x 95 mm 8 dram (30 ml) Clear borosilicate glass vial with 22-400 black phenolic polycone lined cap attached, vacuum & ionized. Our pre-cleaned screw thread vial kits offer the ultimate in convenience. These clear (flint) glass vials are made from type i borosilicate glass, the standard for…

25 x 95 mm, 8 dram (30 ml) Clear borosilicate glass vial with 22-400 black phenolic polycone lined cap attached. clear vials offer maximum visibility. made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no catalytic…

25 x 95 mm, 8 dram (30 ml) Clear borosilicate glass vial with 22-400 black phenolic pulp/vinyl lined cap attached. clear vials offer maximum visibility. made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no…

…foam vial holder. Carrier fits Geno/Grinder clamp; used in pairs. Grinding load per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PC Polycarbonate Vial : 5 mL polycarbonate vial with…

Screw tops 30 µL reservoir Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

…Vials are manufactured and packed in a dust- and particle-free environment, and rigorous quality control protocols ensure consistent cleanliness. Leakproof caps have convenient tabs for easy removal. Foam tray holds 50 dilution vials in a 5 x 10 configuration. Also holds 20, 30 and 50 mL tubes.…

Crimp top 1.5 mL capacity Wide opening 1.5 mL wide opening crimp top high recovery vials have a 30 µL reservoir. High recovery glass vials are for sample concentration and injection without transferring to microvolume inserts. Agilent Technologies products are intended for…

…translucent and able to withstand temperatures to 135°C. Can be used with crimp or snap caps. 1.5 mL Wide Opening Snap Top High Recovery Glass Vials (2714S59) Wide opening, 1.5 mL vials with 30 µL reservoir. For sample concentration and injection without transferring to microvolume inserts. Can…

Each size of prefilled vials contain half the nominal capacity of preservative. Vials provide good clarity to contents and clear graduation markings. Widemouth openings permit easy loading of biopsy tissues and histological samples in operating rooms and quick access to specimens in the pathology…

… Bottle Style Serum Bottle / Vial Style Serum Capacity (mL or oz) 500mL or 16.9oz Bottle Color Clear Mouth ID x OD (mm) 15 x 30 Finish Type Crimp/Serum Serum/Crimp Finish (mm) 30 Product Area Molded Bottles

Protects samples in 40 mL vials from damaging temperatures and breakage due to impact and vibration Fabricated ethafoam insert secures up to 12 vials within insulated container Seamless, molded, expanded polystyrene insulation Shipper is enclosed in a 200-lb. test corrugated carton…

…antibiotic effective against Gram-negative and Gram-positive bacteria and mycoplasma. It binds to the 30S ribosomal subunit, inhibits translocation, and elicits miscoding. Convenient 1 mL vial ready to use. Applications Kanamycine ready-made 50 mg/mL solution acts by binding to the 70S…

…with the addition of citric acid. Results are expressed as ppm (mg/L) SiO₂. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Neutralizer Solution, Activator Solution, 25 mL sample cup, sample cup top, ampoule blank, and instructions.

…are expressed as ppm (mg/L) CrO₄. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Acidifier Solution, 25 mL sample cup, ampoule blank, and instructions. Range: 0-3.50 ppm Method: Diphenylcarbazide Vacu-vials Kits…

…0-30.0 ppm Method: Periodate Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Activator Solution, 25 mL sample cup, 1.0 mL syringe, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a…

… Range: 0-5.00 ppm Method: DPD Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Activator Solution, 25 mL sample cup, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer, a SAM Photometer…

…0-12.00 ppm / Spec: 0-7.00 ppm Method: Bathocuproine Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, 25 mL sample cup, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer…

…Range: 0-1.00 ppm as N Method: Azo Dye Formation Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, 25 mL sample cup, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer…

… Range: 0-25.0 ppm as Mo Method: Catechol Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, 25 mL sample cup, ampoule blank, and instructions. Vacu-vials Kits require the use of the V-2000 Photometer or a spectrophotometer capable…

…expressed in ppb (μg/L) or ppm (mg/L) DEHA. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Activator Solution, 25 mL sample cup, ampoule blank, and instructions. Range: 0-2.00 ppm Method: PDTS Vacu-vials Kits require the…

…chloride to form a blue complex. Results are expressed as ppm (mg/L) PO₄. Our Phosphate Test Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Activator Solution, 25 mL sample cup, sample cup top, ampoule blank, and instructions.

…to perform up to 29 tests (except distilled water): thirty ampoules, Activator Solution, 25 mL sample cup, ampoule blank, 1.0 mL syringe, instructions, and MSDS. Although the test kit contains 30 ampoules, a fresh reagent ampoule blank must be prepared for each series of tests; therefore,…