30 Ml Glass Vial

…Tightly controlled crown formation improves seal. I-D vials with write-on patches have graduations at 0.5, 1.0 and 1.5 mL . High Recovery vials are wide opening, 1.5 mL with a 30µL reservoir. Perform sample concentrations and injections in one vial. Allow virtually total recovery of the sample.

Crimp top 1.5 mL capacity Wide opening 1.5 mL wide opening crimp top high recovery vials have a 30 µL reservoir. High recovery glass vials are for sample concentration and injection without transferring to microvolume inserts. Agilent Technologies products are intended for…

25 x 95 mm 8 dram (30 ml) Clear borosilicate glass vial with 22-400 black phenolic polycone lined cap attached, vacuum & ionized. Our pre-cleaned screw thread vial kits offer the ultimate in convenience. These clear (flint) glass vials are made from type i borosilicate glass, the standard for…

20mL vials have a wide-mouth opening for ease of use and an octagonal-shaped base which locks into our special tray for easy one-handed capping and un-capping. Polypropylene co-polymer (PPC) is nearly transparent. Polyethylene (PE) caps have molded-in sealing rings for virtually leak-proof seals. 30…

25 x 95 mm, 8 dram (30 ml) Clear borosilicate glass vial with 22-400 black phenolic polycone lined cap attached. clear vials offer maximum visibility. made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no catalytic…

25 x 95 mm, 8 dram (30 ml) Clear borosilicate glass vial with 22-400 black phenolic pulp/vinyl lined cap attached. clear vials offer maximum visibility. made of type i borosilicate glass, providing exceptional resistance to heat shock and chemical leaching. The glass is non-porous and has no…

Screw tops 30 µL reservoir Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

20 mL, 30 mL, 40 mL and 60 mL vials in clear and amber glass of 1st hydrol. class glass Bonded Silicone/PTFE closures, thread design 24-414, open/closed top, most frequently used in combination with the 40 mL vial Vial container available for 20 mL, 30 mL and 40 mL vials. Vials are packed…

… 1.5 mL Wide Opening Crimp Top High Recovery Glass Vials (2714Q59 and S49) 1.5 mL Vials with 30 µL reservoir For sample concentration and injection without transferring to microvolume inserts. Crimp Top Vials with Fixed Inserts (2715G02) Crimp Top Extreme Recovery Vials (2714U76)…

…translucent and able to withstand temperatures to 135°C. Can be used with crimp or snap caps. 1.5 mL Wide Opening Snap Top High Recovery Glass Vials (2714S59) Wide opening, 1.5 mL vials with 30 µL reservoir. For sample concentration and injection without transferring to microvolume inserts. Can…

… Glass Type Type I Borosilicate Color CLEAR Bottle Material Glass Bottle Style Serum Bottle / Vial Style Serum Capacity (mL or oz) 500mL or 16.9oz Bottle Color Clear Mouth ID x OD (mm) 15 x 30 …

…extend the shelf-life of these products. Kit comes in a cardboard box and contains everything needed to perform 30 tests: thirty ampoules, Stabilizer Solutions, 25 mL sample cup, ampoule blank, and instructions. Range: 0-7.00 ppm Method: Direct Nesslerization Vacu-vials…

…immunoglobulins and formulated with selected β globulins including the C3 component of complement. The resulting antiserum is heated at 56°C for 30 minutes to inactivate rabbit complement. Heteroagglutinins are absorbed with pooled normal equine red blood cells. The reagent is tested with…

…immunoglobulins and formulated with selected beta globulins including the C3 component of complement. The resulting antiserum is heated at 56°C for 30 minutes to inactivate rabbit complement. Heteroagglutinins are absorbed with pooled normal feline red blood cells. The reagent is tested with…

…The product is dialyzed into 0.01M sodium phosphate, 0.07M sodium chloride, pH 7.3, filtered through a 0.22 μm filter, vialed and lyophilized from a 30 ml solution. No preservative has been added. Purified Human IgG is suitable for use as a positive control in antibody identification…

L-Thyroxine-BSA polyclonal antibody is used for radioimmunoassays. Reconstitute with 1.0 mL of distilled water and let stand for 30 minutes at room temperature. 1:1,000 (using 0.1 mL/assay) It is recommended that each lab obtain their own optimum working dilution by titration assay.

…shelf-life of these products. Kit comes in a plastic case and contains everything needed to perform 30 tests: Refill, Low and High Range Comparators, Stabilizer Solutions, 25 mL sample cup, 1.0 mL syringe, and instructions. WARNING! This product can expose you to chemicals including…

…position inside a 750 mL or larger Fast-Freeze Flask or Lyph-Lock Flask. The second accommodates up to 30 each 2.0 mL microcentrifuge tubes in an upright position inside a 750 mL or larger Fast-Freeze Flask or Lyph-Lock Flask. Tubes and glassware are not included. Glass Lids Replace the acrylic…

…(4). Directions: Suspend 40.34 grams in 990 ml distilled water. Heat to boiling to dissolve the medium completely. Sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. Cool to 50°C. Aseptically add rehydrated contents of 1 vial of Anthracis Selective Supplement (FD185). Mix well…

…insert consists of an upper glass alignment tube with a precise outer diameter that fits very closely within the matching 5mm or 10mm thin wall outer glass NMR tube, ensuring accurate coaxiality and centering of the insert within the outer NMR tube.The lower glass stem tube, of a smaller diameter,…