3 Neck Flask

These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height

Micro round bottom 3-neck flask with all 14/10 threaded outer joints. Supplied complete with open-top screw caps (MW-102-33) and Viton O-rings (MW-100-08).

Baffle indents on the lower outside edge of the flask to help oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.

Extra deep baffle indents on the lower outside edge of the flask to maximize oxygen transfer to the culture medium when used on an orbital shaker. Delong style neck is made to fit stainless steel or plastic closures, while the longer neck reduces the amount of splashing that would reach the closure.

Ai 10L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and one 24/40 center neck. Glass material: high borosilicate glass 3.3.

Round Bottom Flask, Micro Scale, Synthware, Capacity: 25, or 50mL available, Joints: 14/10 threaded.

Manufactured from type 1 class A borosilicate glass with 3 bottom baffles and DeLong® neck. Flask includes a 25mm Bellco SST closure. Ideal for growing, storing and mixing of aerobic and anaerobic cultures.

Pear shape, HEAVY WALL 3-neck flask with standard taper outer joints on the center and 20º angled side necks.

European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. With standard taper outer joints on center and side necks.

…of anchorage dependent cells. Canted neck for easy access to growth surface. A choice of phenolic style caps, plug seal caps and vented caps for sterile gas exchange. The 75 cm 2 canted neck tissue culture flask has a wide mouth for easy pipet access. All flasks are individually pressure tested and…

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. For Larger Flasks See CG-1524.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.

European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. With standard taper outer joints on center and side necks.

…certified non-pyrogenic. Flasks are 100% integrity tested and feature printed lot numbers for ease in traceability. Canted neck flasks allow easier pouring and improved access to the flask for pipetting or scraping. Rectangular flasks have a ramp from the bottom to the canted neck for easier pouring…

These 100mL PYREX(r) round bottom boiling flasks have long necks with tooled mouths and take a rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater…

Head with four necks, three inline standard taper joints and one 90 degree joint. 10/30 size for use with our 8314 family of jointed thermometers. Use with our 6504, 6511 & 6516 reaction vessels that feature either a 137 x 100mm ID or 168 x 130mm ID flat flange. Use with our 6508 or 6510 clamps. For…

…need to use poly-D-lysine or other coatings to improve cell attachment. Rectangular flasks have a ramp from the bottom to the canted neck for easy pouring and pipette access. Most canted neck flasks also have an anti-tip skirt for increased stability. Three styles of caps are available:…

Triple baffled flask has a Delong style 38 mm neck for plastic or stainless steel closures. Triple baffles are located at the center of the flask bottom to achieve maximal oxygen transfer to culture medium. Closures are sold separately.

Three-neck heavy wall round-bottom flask with Standard Taper outer joints Side necks are angled Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438, Type I, Class A requirements

…non-pyrogenic. Flasks are100% integrity tested and feature printed lot numbers for ease in traceability. Canted neck flasks allow easier pouring and improved access to the flask for pipetting or scraping. Rectangular flasks have a ramp from the bottom to the canted neck for easier pouring…

…serum or serum-free conditions Reduces premature cell detachment from confluent cultures 175 or 225 cm 2 sizes Angled neck cell culture flasks have been treated with a patented Corning® CellBIND® surface treatment for optimal cell attachment. Manufactured from optically…

Black nylon monofilament bristles 8 x 1 3/4 inches, on galvanized wire, with hinged joint and wooden handle Can be used in flasks with long necks, 1 3/4” diameter or short neck balloon flasks with 1 1/2” i.d. Total length 23 5 /8”.

These PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height.

These PYREX® multiple neck flasks have three vertical side necks with outer Standard Taper joints placed 90° apart and a larger center neck with a vertical Standard Taper joint.

These PYREX® three neck flasks have two vertical side necks with full length outer Standard Taper joints and a larger vertical center neck with a full length Standard Taper joint.

These PYREX® three neck flasks have two angled side necks at the same height with Standard Taper outer joints and a larger center neck with a vertical Standard Taper joint.

Featuring a center neck and two side necks with full length outer Standard Taper joints that are 180° apart, these borosilicate glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or…

Treated with Corning® CellBIND® surface treatment Large 175 or 225 cm2 size for more efficient cell production

Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.

Round bottom flask with four necks arranged 3 in-line and one at 90 degrees. The three side necks are angled.

This borosilicate glass round bottom flasks has three necks - the center neck is vertical and the side necks are 180° apart and are inclined at an angle of 20° to the vertical. All necks have Standard Taper outer joints.