3 Inch Sieve

Diameter: 3", height: 1.75" Cover and receiver 8323T90 and T95, not included with sieves, fit all sieve sizes in this series.

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

Elmasonic S50R Ultrasonic Sieve Cleaner safely and rapidly cleans analytical sieves with a diameter of 8 inches or less. Ultrasonic bath for all standard laboratory applications 3 optimized modes: Sieve cleaning, Degassing, Sample preparation High intensity ultrasonic power …

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

…Steel, 8 inch, Full Height Sieves Diameter: 8 inches; height: 2 inches 8326S06 and S11 Sieves provided with a 28 mesh, stainless steel support screen soldered directly below the cloth for longer cloth life. Cover and receiver 8323S50 and S60, not included with sieves, fit all sieve sizes…

All sieves marked with U.S. designated number and opening in inches as well as in millimeters Meet ASTM Standard E 11; comply with NBS, ANS and ASA standards Listed by “Alternate” and “Standard” U.S. Series designations; see accompanying table for other…

…preceding 8323E53 Diameter: 8”; height: 1” 8323Q81 and Q87 Sieves provided with a 28 mesh, stainless steel support screen soldered directly below the cloth for longer cloth life. Cover and receiver 8323Q90 and Q93, not included with sieves, fit all sieve sizes in this series.

4-Inch Brass Frame/Stainless Steel Cloth Deep Frame Washing Sieves Seamless brass frame with stainless steel wire cloth

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

…in diameter sizes of 3, 8 and 12 inches. They can be supplied with aperture sizes ranging from 125 mm down to 20 µm and in full or half height versions. Woven wire mesh sieves are available in frame materials of either brass or stainless steel with larger diameter sieves also available in plated…

… Rugged sieve withstands most laboratory cleaning agents, such as CIP100, Duofoam and isopropyl alcohol. Sieve has no ink markings on mesh, no crevices or solder joints at the juncture of the frame and mesh, no rivet holes or epoxy bead on the inside of the test sieve frame. Sieves are supplied…

…traditional inch and number designations where appropriate. Common coarse sizes are also listed. Normally, every second or fourth size is used, although precision testing may require consecutive sizes. Additional sieves are often inserted into the sequence to avoid overloading of individual sieves…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

…of sieves to be used when stack height is limited. Full-Height frames allow free movement of larger particles during agitation for more efficient separation. ISO Test Sieves are fitted with black rubber O-rings. Sieve Verification procedures should be in place to regularly check working sieves…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

…as well as traditional inch and number designations where appropriate.Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half…

Gilson ASTM 3" diameter Round Stainless-Steel Test Sieves meet the requirements of ASTM E 11. Stainless Steel Frame with Stainless Steel Cloth assures a sieve with the longest possible service life. This is the best choice where contamination, sanitation or extreme wear is an issue. Full-height…

…overloading of individual sieves or to better define a particular size range.Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Most…

…overloading of individual sieves or to better define a particular size range. Frame Diameter should be large enough to accommodate the entire sample volume with enough surface area to avoid overloading individual sieves. The frame diameter selected must also fit the sieve shaker being used. Half or…

Stainless steel , 3-inch sieves Stainless steel frame /stainless steel cloth Overall height - full height 1 3/4” Depth to cloth - full height 1 1/4” Each test sieve is supplied with a serial number, establishing assurance of traceability.

…frame with stainless steel wire cloth 8-inch diameter frame Additional support cloth available for extended sieve life Designed for hand washing of fine powder samples, these sieves will also fit all conventional 8-inch pans and covers. Custom configurations can be ordered with any ASTM-Ell or…

Stainless steel, 6-inch, full height Stainless steel frame and stainless steel cloth 6” diameter

…100% QC inspected. Sieves are extremely durable for long life and performance. Sieves are packed in sturdy, reusable storage containers. *Currently no part of the ASTM E-11 Specifications 3 1/4” deep to cloth Certificate of Conformance provided with each sieve Conforms to…

12-Inch Brass and Stainless; Intermediate Height 12” diameter brass frame with stainless steel cloth 2” from top of frame to sieve cloth

…Molecular Sieve and Stand 1 Piece 6 inch x 48 inch Shell     -55 piece 48 inch Tubes     -Designed for 3lbs/min recovery speed All Hoses and Fitok Compression Fittings ASME CANNON 45 (Full System) Includes: 1 piece ASME 200L Separator 3 piece…

…Configuration Select Benchtop or floor stand mounted model - Includes the following; 1x Plunger, 1x Stainless Steel Hopper, 3x Sieves (0.5mm, 1mm & 2mm), 1x Jar adaptor, 3x 16oz glass jars, 1x Toolset, 1x rotating cutter head with 4x rotating blades, 6x stationary cutting blades, and 1x…

…- Available in 115V (60Hz) and 230V(50Hz) configurations - Includes stainless steel hopper with cover, wooden plunger, one rotating cutting head, one set of stationary blades, three (3) stainless steel sieves (20, 40 & 60 mesh), one jar adapter, one 4oz collection jar, and cleaning brush.