3 Hole Rubber Stopper

Agilent Technologies products are intended for sale/shipment within the US only. International customers should contact their local Agilent Technologies distributor to place orders for Agilent Technologies products.

Standard Grade Sizes No. 00, 0 and 1 have holes 2, 3 and 4 mm diameter, respectively; all other sizes have holes 5 mm diameter

Size No. 000, 00 and 0 have hole 3 mm diameter; sizes No. 1 and 2 have hole 4 mm in diameter; all other sizes have hole 5 mm in diameter.

RS-2H-C 1 pound package of assorted 2 hole rubber stoppers. Sizes and quantities are as follows: Size 2: 3 each Size 3: 3 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each Size 8: 3 each

1 pound package of assorted 1 hole rubber stoppers. Sizes and quantities are as follows: Size 00: 4 each Size 0: 4 each Size 1: 4 each Size 2: 4 each Size 3: 4 each Size 4: 3 each Size 5: 3 each Size 6: 3 each Size 7: 3 each

…for added chemical resistance Listed mainly by trade-size, available in solid, one-hole, and two hole rubber stoppers. Uses vary widely, some are outlined below: Carboy Stoppers Crucible Holders Laboratory & Test Tube Stoppers Masking Applications Micro Stoppers Pipe Plugs Tube Stoppers

A black rubber stopper that is useful in a number of applications. Available in a variety of sizes. Each pack is one pound. Choose from solid, 1 hole, and 2 hole stoppers.

Made of soft, pliable, black-compounded stock Length: 25 mm Includes stoppers of solid, one-hole and two-hole styles in sizes 00, 0, 1, 2, 3, 4, 5, 6, 6 1/2, 7 and 8; total of 66 stoppers

General purpose single-hole silicone rubber stoppers. Steam autoclavable Opaque yellowish-white color Silicone stoppers with holes are manufactured from pure silicone rubber

Top Stoppers for Incubation Flasks. Rubber stoppers for flask top and sidearm provide a secure double seal Top stopper has off-center hole for insertion of center well Fits both 10 and 25 mL flasks

…inventory Molded of soft, resilient, white natural rubber Seals vacuum-tested to 760 mm Hg Autoclavable, with good shelf life. Sizes #3 & #4 have two holes; #5 - #10 have the (3) holes. 8744H10 Assortment includes nine size 3, eight size 4, six size 5, four size 6, two each sizes 7…

…Gauze, 5” x 5”, with ceramic center [1] Crucible, Porcelain, 25 ml with lid [1] Watch Glass, 75 mm dia [1] Plastic Scoop [1] Spatula, stainless, 3” long blade with wooden handle [3] Rubber Stoppers, solid [3] Rubber Stoppers, one-hole [3] Rubber Stoppers, two-hole

…conditions only (not dry heat). End user must test for their specific application. Note: #3 & #4 only have two holes. The Assortment Pack Consists of the Following Stoppers: 9 each Size # 3 8 each Size # 4 6 each Size # 5 4 each Size # 6 2 each Size # 7 2 each Size #…

…for use in fermentation applications. These are: 2 Polypropylene screw closures, one with a hole that accepts a #10 stopper 1 No. 10 silicone rubber stopper with a hole (useful for a 3 piece fermentation lock) 1 EPDM O-ring that can be inserted into the closure for additional security…

Designed for use with Millipore stainless steel vacuum filter holders Stopper Size: No. 8 Hole I.D.: 9.5mm (3/8 in.) Silicone rubber construction

Thomas No. 1166P43 #3 rubber stopper w/holes Thomas No. 1166P44 Aviation frz/pt tube

… Screw-type closure holds membrane in place Autoclavable Can be used with any filtering flask or manifold that accepts a suitable rubber stopper with hole. Includes one easy-to-use, no-twist Nalgene® vacuum gasket, which can replace a No. 7 or 8 rubber stopper with a 9/16” (15 mm) hole.

Scale is durable white ceramic enamel Funnel top to accept No. 3 one-holed rubber stopper Class A accuracy Stopcock for both sizes is Standard Taper 2 1990K60 is graduated in 0.01 mL intervals. 1990K80 is graduated in 0.02 mL intervals.

…scintillation counting vial Sidearm flask enables syringe needle entry without disturbing established conditions Rubber stopper provides a double seal and has an off-center hole for the insertion of the center well Manufactured from 33 expansion, low extractable borosilicate glass…

…scintillation counting vial Sidearm flask enables syringe needle entry without disturbing established conditions Rubber stopper provides a double seal and has an off-center hole for the insertion of the center well Manufactured from 33 expansion, low extractable borosilicate glass…

…does not need to be fitted closely around the funnel stem to be functional. Can be used singly or nested with adjacent sizes. Eliminates boring of special size holes in rubber stoppers and difficulties of insertion and removal. Withstands autoclaving. Available as a set or in individual sizes.

…4” Clamp - 1 Rubber Stoppers # 0, 1-hole - 2 Rubber Stoppers # 3 1-hole - 2 Rubber Stoppers # 6 1-hole - 2 Rubber Stoppers # 6 2-hole - 2 Rubber Tubing, 4 ft., 1/4" i.d. - 1 Test Tube Clamp - 2 Test Tube Brush 3x1/2" - 1 Test Tube Rack, 12 Holes, 12 Pins, Wood - 1 …

…or better) Drying Oven Vacuum filtration setups (aspirators or small vacuum pumps, 250mL Buchner funnels, 250mL Erlenmeyer flasks w/sidearm, ring stands w/ laboratory clamps, rubber tubing, glass tubing, #6 two-hole rubber stoppers, #6 Buchner funnel rubber stoppers) DOT Info: Non-regulated

…for water quality work The 0.2 µm membrane is excellent for sterility testing Graduated upper chamber provides accurate and convenient sample measurements Includes six funnel adapters designed to fit a #8 rubber stopper with a 1/2-inch hole. Case contains 50 filters.  

…Pestle, 90mm (1), Rubber Stopper, #1, solid (6), Rubber Stopper, #1, one-hole (1), Rubber Stopper, #2, solid (1), Rubber Stopper, #2, one-hole (1), Rubber Stopper, #2, two-hole (1), Rubber Stopper, #6, solid (3), Rubber Stopper, #6, one-hole (3), Rubber Stopper, #6, two-hole (3), Spatula, Stainless…

…diameter with 3" diameter hole. Optional collector lid for FreeZone 2.5L Freeze Dryers. For use with solvents that attack arcylic, like acetonitrile. Includes neoprene gasket. 14.0" dia. Acrylic Lid (1177K47) Acrylic lid has 14.0" dia. w/ 3" dia. hole for direct…

…yet allows easy access for retrieval and replacement of membrane. Clamp allows one-handed operation. Funnel may be used with any filtering flask or filter manifold which has a No. 8 rubber stopper with a 9/16” (15 mm) hole. Funnel and clamp, Thomas number 4618Q60, also available separately.

…not be handled. Packed complete with a reservoir bottle, U-shaped drying tube, vented connecting tube, rubber squeeze bulb, #1 single-holed rubber stopper, PTFE stopcock plug and 1/4 inch ID tubing Precision ground tips assure uniform outflow Supplied with a chemically-resistant,…

…Developing and Using Models; Planning and Carrying Out Investigations Kit Includes: 15 Gas Law Demonstration Apparatus 15 Rubber Stoppers, 2-hole 15 Rubber Stoppers, 1-hole Required: Temperature and Pressure Sensors DOT Info: Non-regulated *”Next Generation Science Standards” is a registered…