3 8 Id Tubing

Compare Tool

Select up to 3 products

3 8 Id Tubing
1 - 32 of 75
Sort
View
Show
  • 8mm ID silicone tubing with foam rubber insulation for handling water or a water-glycol mixture in LAUDA thermostats For temperatures from -60 to +100 degrees C

  • These fittings ensure a tight, secure connection between tubing having different inner diameters (I.D.). Chemical-resistant polypropylene plastic for use with a wide range of liquids or gases FDA-grade for direct contact with food, drugs, and cosmetics Autoclavable Overall…

  • These straight fittings ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Chemical-resistant polypropylene plastic for use with a wide range of liquids or gases. FDA-grade for direct contact with food, drugs, and cosmetics Autoclavable …

  • … This non-toxic, autoclavable tubing has the flexibility and chemical-resistance characteristic of natural rubber. It is ideal for general laboratory applications as well as for clinical and biological uses. Meets Federal Specification ZZ-T-831C, Amendment 3, Types IV and V. 50-foot quantities…

  • …multiple barbs per arm providing additional contact between the fitting and the tubing for extra gripping power. Ensures a tight, secure connection between lengths of tubing having the same inner diameter (I.D.) Chemical-resistant polypropylene for use with a wide range of liquids or…

  • Use these fittings to ensure a tight, secure connection between lengths of tubing having the same inner diameter (I.D.). Multiple barbs per arm provide additional contact between the fitting and the tubing for extra gripping power Chemical-resistant polypropylene plastic for use with a…

  • NMR Tube 3mm 8" Cs5

    DWK Life Sciences (Kimble)

    Our KIMAX®-HQ NMR tubes are our highest quality NMR tubes and are 100% gauged for wall thickness, concentricity and camber specifications. Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm …

  • NMR Tube 3mm 8" Cs5

    DWK Life Sciences (Kimble)

    100% gauged for wall thickness, concentricity and camber specifications Attached polyethylene caps OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I and ASTM E438,…

  • NMR Tube 3mm 8" Cs5

    DWK Life Sciences (Kimble)

    …wall thickness, concentricity and camber specifications Attached polyethylene caps Sandblasted marking spot OD 3.0124 (+0.00/-0.013) mm ID 2.4003 (+0.013/+0.00) mm Wall thickness 0.284 mm Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type I…

  • … Microcentrifuge Tube Rack PP, for 1.5ml tubes. Racks  allow storage of 20 micro test tubes. Top step is numbered  from 1 to 10, lower step is numbered from 11 to 20. Made of autoclavable polypropylene. Hole I.D. for 1.5ml tube rack is 1/4".   Tube Rack Micro 0.5ML …

  • Easy tube content ID Autoclavable Angling 50 mL tubes allows easier identification of contents marked on cap. The rack, whether used on a benchtop or in a refrigerator, holds frequently used reagents nearby and on an angle facing the user. Angled rack is also useful for draining excess…

  • …as forensic laboratories. Benefits Versatile design allows tubes, strips, and plates to be tagged in a variety of configurations and styles Identify PCR samples with more information than cap dots and tube side rectangular labels combined Quick, bird’s eye view of all…

  • Thistle Tubes

    SP Bel-Art

    …burettes and narrow neck containers easily with this flared top thistle tube. Polypropylene plastic; chemical resistant, unbreakable, safe Steam autoclavable at 121°C (250°F) Dimensions: 27mm (1-1/16") I.D. top with a 41mm (1-5/8") O.D. flare 6.4mm (1/4") stem…

  • Drying tubes with tube fittings can be filled with desiccant of your choice. Each tube is supplied with two polypropylene fittings with serrated tapered end that accept 6.4 to 9.5mm (1/4 to 3/8") I.D. tubing Unbreakable polyethylene straight tubes; 16mm I.D. x 19mm O.D. (5/8 x…

  • Adapter, o-ring joint to size E hose connection, fits 3/8"-7/16" id tubing, fetfe o-ring included

  • …precision bore tubing manufacturing techniques proven most reliable in NMR applications. A complete selection of tubes for all types of NMR spectrometers, from 60 to 600 MHz is available. All 5 mm NMR sample tubes have O.D. = 4.97 + 0.000-0.013 mm. The I.D. of all except basic tubes are 4.20 +…

  • To maximize SNR, Precision NMR Tubes have minimal paramagnetic impurities that would impact shimming. Tight ID and OD tolerance as small as 0.0065mm accommodates Wilmad inserts. Manufactured in a state-of-the-art ISO 9001:2008 USA facility using a unique precision shrinking and grinding…

  • Filling/Venting Closure

    Thermo Scientific Nalgene

    … Two 1/2” filling ports and one vent port Autoclavable Two barbed filling ports for 1/2-inch-i.d. tubing and one 3/8-inch-o.d. vent port used with syringe/air filters. Includes polypropylene cap, TPE gasket, three ports, TPE port caps and silicone tubing. Bottle not included.

  • Tubing connector, used to connect flexible tubing (1/4", 3/8", 1/2", 3/4", 1"ID) to #7, #11, #15 or #25 Ace-Thred for easy, safe connect/disconnect. 5029/7506 Nylon bushing slides over serrated end and secures PP connector in thread with silicone O-Rin

  • Fits tubing from 3 to 12,, (1/8 to 1/2") I.D. Two barbed polyethylene connectors that assemble tightly together with a male-female center taper Useful in connecting and disconnecting vacuum lines and other tubing assemblies All sizes are interchangeable with others, making for reducing…

  • Thermo Scientific™ Nalgene Quick-Action Tefzel Spigots are chemically resistant to selected solvents and other chemicals. Body and plug are made of Tefzel ETFE Accepts tubing with 5/8'' I.D. Autoclavable

  • Pall® Hose barb adapter

    Pall Laboratory

    Hose barb adapter, nylon, 1/4 in. MNPT to 9.5 mm (3/8 in.) ID tubing (1/pkg) Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications.

  • …Automatic tubing break-in Automatic calibration procedures External connectivity with USB interface and I/O port Easy to maintain Allegro™ I Peristaltic Pump System One channel pump head Flow rates up to 1500 ml/min Accepts tubing ID sizes 0.8 mm (0.03 in) - 8.0 mm…

  • Bottle Reservoir 20L

    DWK Life Sciences (Kimble)

    …outlet is controlled with an 8 mm valve ·     Valve  can be used with 1/4” flexible tubing attached to the quick-release hose barb connector and with rigid 1/4” OD PTFE tubing with the o-ring and cap supplied…

  • HDPE Lowboys With Spigots

    Thermo Scientific Nalgene

    …is included. Closure size 63 mm; spout takes 5/8” i.d. tubing; serrated tubing adapter that takes 1/4” or 1/8” i.d. tubing is supplied Dimensions: 8 liter Lowboys measure 12” x 14 1/2” x 6 1/2”; 15 liter Lowboys measure 14 1/2” x 14 1/2” x 8”

  • 3-Ported Closure

    Thermo Scientific Nalgene

    …Closure fits all Biotainer products with a 48 mm QA neck. Closure can be used for filling or venting operations. Ports have tabulations on inside and outside of closure for attachment of tubing. Two 8 mm fluid ports accept 6-7 mm ( 1/4 in.) I.D. tubing. Vent port accepts 4.5 mm ( 3/16 in.) tubing.

  • Biotube System

    Simport

    8 x 12 format Ideal for all PCR applications: EIA, RIA, cell harvesting, etc. All components are made of the highest quality polypropylene to assure low protein binding. Rack cover has an alphanumeric numbering system for identifying each tube and is supplied with a removable, 96-place ID

  • …pump tubing (18”); 6 tubing ratchet clamps; 2 barbed T-fittings; 1 barbed reducing connector; 20 4 wire ties; 1 barbed Y-connector; 5 each male and female barbed luer fittings; 2 male luer plugs; 2 interlink injection sites; 1 sleeve of blunt plastic cannulas and 3 1.0” ID x 1.25”…

  • Filter Flask, Safety Coated

    DWK Life Sciences (Wheaton)

    Glass components manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements Flasks have a #2 hose connection for 1/4 (6mm) I.D. tubing Plastic coated for safety Not Graduated No. 8 Stopper opening

  • Reusable Filter Holders with Receiver

    Thermo Scientific Nalgene

    … Two side-arms allow connection to vacuum line; also accepts syringe filters. Tubing adapter can be stuffed with cotton for sterile venting; accepts 1/4” to 5/16” (6 to 8 mm) i.d. vacuum tubing. 4618N60 funnel and receiver volumes are 250 mL. Dimensions: 180 mm H x 110 mm o.d.…

  • KimCote® Filtering Side Arm Flasks

    DWK Life Sciences (Kimble)

    …steam-autoclavable The 125mL flask has a No. 5 stopper joint The 1, 2 and 4 liter flasks have a No. 8 stopper joint All flasks have a side arm for connection to 3/8” (6 mm) ID flexible tubing Manufactured from 33 expansion, low extractable borosilicate glass conforming to USP Type…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.