3-neck Flask

Micro round bottom 3-neck flask with all 14/10 threaded outer joints. Supplied complete with open-top screw caps (MW-102-33) and Viton O-rings (MW-100-08).

Ai 10L heavy wall, 3-neck round bottom flask with 24/40 and 34/45 standard taper joint. Comes with two vertical 34/45 side necks and one 24/40 center neck. Glass material: high borosilicate glass 3.3.

Round Bottom Flask, Micro Scale, Synthware, Capacity: 25, or 50mL available, Joints: 14/10 threaded.

Heavy wall round bottom three neck flask with standard taper outer joints on center and side necks. Lower outlet is a CG-911-A extended tip which fills the seat area and permits total agitation of the contents of the flask. Once opened the contents of the flask will drain through the sidearm. The…

Pear shape, HEAVY WALL 3-neck flask with standard taper outer joints on the center and 20º angled side necks.

European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. With standard taper outer joints on center and side necks.

European style flask with tapered walls and a shallow hemispherical bottom for more efficient mechanical or magnetic stirring. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. With standard taper outer joints on center and side necks.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. For Larger Flasks See CG-1524.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and vertical side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center neck and 20º angled side necks. Flasks with 29/26 center necks have a groove tooled just below the grind to aid in clamping of the flask.

Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center and 20º angled side necks. Indentations increase agitation of the contents of the flask during stirring. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum.

…outer joints on the center and side necks. Entire body of the flask is jacketed and has two hose connections for circulation of heating or cooling liquid. Indentations increase agitation of the contents of the flask during stirring. MORTON STYLE REACTORS AND FLASKS ARE NOT SUITABLE FOR VACUUM.

Round bottom, HEAVY WALL three neck flask with standard taper outer joints on the center and side necks. Indentations increase agitation of the contents of the flask during stirring. Please Note: Morton Style Reactors/Flasks Not Suitable For Vacuum.

Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid.

Round bottom, HEAVY WALL, three neck flask with standard taper outer joints on the center and side necks. Lower outlet is a CG-424-05, 4mm straight bore PTFE stopcock.

Round bottom, HEAVY WALL, three-neck flask with standard taper outer joints on the center neck and vertical side necks. Lower half of the flask is jacketed with two hose connections for circulation of heating or cooling liquid. Lower outlet is a CG-424-05, 4mm PTFE straight bore stopcock.

These 1L PYREX® three vertical neck flasks have two side necks with 24/40 outer Standard Taper joints and a center neck with a 24/40 Standard Taper joint. All of the necks are at the same height

…glass reaction vessel lids have a conical flange. The bottom part of lid is finely ground for a leak-proof fit with flask. LG-8030 is used on cylindrical or spherical reaction vessels with a 4" I.D. flange. NOTE: Use clamp LG-8070-100 for flasks beginning with LG (4" I.D.).

Featuring a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has a flat flange. For use with large capacity cylindrical reaction vessels, 2000mL, 3000mL and 4000mL (LG-8082, LG-8084, LG-8085, and LG-8089). Flange…

Featuring a center neck and two side necks with full length outer Standard Taper joints, this borosilicate glass 3-neck reaction vessel lid/cover has an 6-5/8" flange O.D. and comes with a size 359 O-ring. Designed to be used with 2000mL, 3000mL, and 4000mL cylindrical reaction vessels…

…flying glass of flask implosions in high vacuum distillations, from falling objects; and, from thermal strain between top and lower half of flask during high-temperature operations. With a glass-fabric construction and laced-side opening, the elliptical hole accomodates 1-, 2-, and 3-neck flasks.

…bottom flasks after distillate is collected. PLEASE NOTE: Lab Jacks, Support Stands, Flask Stands, and Extension Clamps with Bosshead are not included in this kit. Contents: Short Path Distillation Head, Vacuum Jacketed, 24/40, 34/45 . . . . . . . . 2 Flask, Round Bottom, 3-Neck…

…and will maintain constant speed regardless of viscosity changes as mixing progresses. Speed range from 0 to 1,000 rpm. Ideal for use in 3-neck flasks. The Agitator (8583L32) Unique forward-reverse rotation provides powerful mixing-action and eliminates cavitation …

Product Highlights Opening holds 1, 2, or 3 neck flasks on ring stand Zipper fastens upper and lower halves together 120VAC model includes 3” (76mm) lead wire with NEMA L1-15R connector and a 4-foot (1.2m) power adaptor cord with NEMA 1-15 plug. …

Product Highlights Ideal for preventing vapor condensation in upper half of flask Excellent alternative to other heating methods like a bunsen burner Opening holds 1, 2, or 3 neck flasks on ring stand Specifications Fiberglass cloth outer shell Uniform, low-watt…