2ml Microcentrifuge Tube

Compare Tool

Select up to 3 products

2ml Microcentrifuge Tube
1 - 32 of 64
Sort
View
Show
  • High Speed Microcentrifuges

    labForce (a Thomas Scientific Brand)

    12 tube capacity / Up to 16,100 xg Less than 9 in. wide Quick deceleration Whisper quiet operation labForce’s High Speed Microcentrifuge is the first and only compact microcentrifuge capable of achieving centrifugal speeds up to the critical threshold of 16,000 xg, often held as…

  • 2.0mL Dolphin Microcentrifuge Tubes

    Sorenson

    Natural, Polypropylene Non-Sterile, Bulk Bag, 1,000 Tubes/Bag, 5 Bags/Case Grad Lines: Yes Certified RNase/DNase Free Certified Human DNA Free Certified PCR Inhibitor Free Certified Pyrogen Free

  • 2.0mL Graduated Microcentrifuge Tubes

    Crystal-clear polymer facilitates visualization of samples Rated to 20,000 x G Graduations at every 100 μL for easy volume estimation Temperature range: -80°C to +121°C Certified free of detectable RNase, DNase, DNA, PCR inhibitors, and tested pyrogen-free Sterile product…

  • 2.0mL Snap Cap Microcentrifuge Tubes

    Stockwell Scientific

    2.0mL Snap-Cap Microtubes, Capless, Clear Max. Force (RCF): 18,000 Brittleness Temp.: 0°C Max. Temp.: 135°C Material: Polypropylene Max. Volume: 2.0mL

  • 2.0mL MaxyClear Snaplock Microcentrifuge Tubes

    Axygen®

    Axygen® 2.0mL MaxyClear Microtubes are available in a variety of colors, sterile, and Maxymum Recovery®. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap. Will withstand up to…

  • Screw Cap Polypropylene Microcentrifuge Tubes; 2.0mL

    Corning

    Unattached HDPE rim seal caps provide a tight secure seal Polypropylene Self-standing Sterile Withstands a maximum RCF of 20,000 xg

  • Microcentrifuge Tubes with Snap Caps

    Globe Scientific

    These polyropylene microcentrifuge tubes feature attached leak-resistant flat snap caps. Each tube is molded with precise graduation marks for accurate measurements.  Mfr. No. 111562 & 111572 These 1.5mL and 2mL microcentrifuge tubes are lot certified to be RNase free, DNase free,…

  • Microcentrifuge Tubes without Caps

    Globe Scientific

    These polypropylene (PP) microcentrifuge tubes without cap are resistant to most chemical reagents and can be autoclaved at 130°C. The tubes are offered in 1.5mL and 2mL sizes.

  • Microcentrifuge Tubes

    Celltreat Scientific

    …Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes

  • Microcentrifuge Tubes in Self-Standing Bags

    Globe Scientific

    …won't hinder spectrophotometer reading. These microcentrifuge tubes are offered in resealable, tamper evident self-standing bags. Features: Variety – Now available in 3 volumes — 0.5mL, 1.5mL and 2.0mL and 8 colors — amber, blue, green, natural, orange,…

  • Microcentrifuge Tube Racks

    United Scientific Supplies

    …compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Racks lock together on each side so that several can be attached for larger experiments. Each hole has molded in numbers for sample indentification. Ergonomic design provides easy insertion and removal and of tubes. Include rubber stopper…

  • Microcentrifuge Tube Racks

    United Scientific Supplies

    Stackable polycarbonate racks are compatible with both 1.5ml and 2.0ml microcentrifuge tubes. Each hole has molded in numbers and letters for sample identification. Ergonomic design provides easy insertion and removal and of tubes. Can be used in wide temperature range (-135 °C to 135 °C).…

  • Microcentrifuge Tubes

    Biotix

    Biotix microcentrifuge tubes are manufactured with medical grade virgin polypropylene for superior clarity. These snapcap tubes are leak resistant, boil proof, and able to withstand 20000 RCF. Try our Microcentrifuge tubes: Sizes include 0.65mL, 1.5mL, and 2.0mL Graduation marks for…

  • titeSeal™ Microcentrifuge Tubes

    ACTGene, Inc.

    1.5ml and 2.0ml microcentrifuge tubes are easy to open with leak-proof tight seal cap. Withstand 21,000xg. Clear and clarify for easy viewing and graduation with writing area. Certified for DNase, Rnase, DNA, PCR inhibitor, and pyrogen free. Available in sterile and non-sterile choices. …

  • 5mL Snap Cap Diamond Midi™ Centrifuge Tube

    Globe Scientific

    An efficient and economic alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL Diamond Midi™ Centrifuge Tubes: Reduce total cost to the lab for purchase and use …

  • Prep Safe™ Floating Microcentrifuge Tube Rack

    Bel-Art - SP Scienceware

    Unique tabs keep tubes in place and caps closed to protect your samples from loss and contamination. Patent pending   Prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Fits most 1000ml beakers …

  • Diamond Midi™ Centrifuge Tubes

    Globe Scientific

    An efficient and economic alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL Diamond Midi™ Centrifuge Tube: Reduce total cost to the lab for purchase and use …

  • Scienceware® PrepSafe™ Microcentrifuge Tube Mini Floating Racks

    Bel-Art - SP Scienceware

    …contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Patent pending. Immobilizing tabs prevent tube tops from popping open during boiling Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered…

  • SureSeal™ Screw Cap Microcentrifuge Tubes

    MTC Bio

    From the SureSeal family of sterile tubes you trust comes MTC Bio’s new 2.0mL screw cap microcentrifuge tubes. Made from ultra-clear polypropylene, with crisp printed graduations, SureSeal 2mL screw-cap tubes offer the best visualization of sample on the market today! May be centrifuged at up…

  • Locking Centrifuge Tubes

    Globe Scientific

    Available in 0.5mL, 1.5mL, 2.0mL & 5mL Diamond Midi™ Locking Centrifuge Tube Locking Centrifuge Tubes are engineered with a secure locking system that provides the security of a screw cap microtube with the simplicity of a snap cap tube. Features: Secure –…

  • BRAND Microcentrifuge Tubes

    BrandTech®

    BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

  • 20-Place Heavy Duty Microtube Racks

    Globe Scientific

    … Reinforced polypropylene (PP) for strength and durability Rubber feet provide stability on slick surfaces Numeric markings for sample identification Compatible with both 1.5 and 2mL microtubes Dimensions (L x W x H): 209 x 71 x 35mm (8.25" x 2.75" x 1.4")

  • Screw-Cap Microcentrifuge Tubes

    Bio Plas

    Tube is made of inert virgin-polypropylene copolymer, to minimize the risk of altering samples Universal use - Accommodates all fixed angle head microcentrifuges (0.5ml and 2.0ml upright models require adapter Cat. No. 4212). Will withstand maximum G-forces of all current microcentrifuge

  • Reversible Racks for Microtubes

    Globe Scientific

    …freezer storage 80/60 well rack capacities: 80-place for 1.5mL and 2mL tubes 60-place for 0.5mL and 0.2 mL tubes 96 well rack capacities: 96-place for 1.5mL and 2.0mL tubes 96-place for 0.5 mL and 0.2 mL tubes 96 well racks have translucent cover to allow viewing of samples while…

  • Snap Together 128-Place Racks for 1.5mL and 2.0 mL Microtubes

    Globe Scientific

    Reinforced polypropylene (PP) is autoclavable Shipped flat to save shelf space and quickly assembled when needed Dimensions (L x W x H): 270 x 130 x 30 (10.6" x 5" x 1.2")

  • 96 Place Reversible Racks with Covers

    Globe Scientific

    …  Excellent chemical & temperature resistance   96 Well rack capacities - 96-place for 1.5 & 2.0mL tubes - 96-place for 0.5 & 0.2mL tubes   96 Well racks have translucent cover to allow viewing of samples while they are protected Offered in 8 attractive…

  • Scienceware® PrepSafe™ Microcentrifuge Tube Mini Floating Racks with Vortexing…

    Bel-Art - SP Scienceware

    …tabs protect your samples from loss and contamination. Place tubes in slots and slide under tabs to keep tubes from opening when under pressure, submerged or knocked over. Holds up to twelve 1.5ml or 2.0ml microcentrifuge tubes in numbered locations Raised handle for easy lifting without…

  • Wireless Racks for Microtubes

    Globe Scientific

    Reinforced nylon rack is autoclavable and chemical resistant Fits 1.5mL and 2.0mL microtubes Single piece construction Molded handles facilitate secure handling Alphanumeric markings for sample identification Stackable Dimensions (L x W x H): 24-Place rack: 143 x 90 x 52mm…

  • SuperClear™ Screw Cap Microcentrifuge Tubes

    Labcon

    Ultra clear resin 0.5, 1.5, 2.0mL sizes Resealable bags Low profile caps with universal threads SuperClear™ Screw Cap Microcentrifuge Tubes are made from an ultra clear resin that gives you an excellent view of tube contents. These tubes include universal screw threads that…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.