250 Ml Centrifuge Bottle

For large volume centrifuge bottles Epoxy-coated steel wire rack is ideal for conical-bottom centrifuge bottles that can not stand by themselves. Bottom rails hold bottles securely upright. Accommodates round-bottom tubes as well. Holds up to 60 mm diameter bottles (250 mL max.). Autoclavable.…

Polycarbonate bottles RCF to 27,500 x g Withstand temperatures of -135° to +135°C Round bottoms Autoclavable (autoclaving shortens bottle life). Include 38 mm polypropylene caps. Dimensions (o.d. x H, mm): 61.7 x 136.

High-density Polyethylene bottles RCF to 8,000 x g Withstand temperatures to -100°C Flat bottoms HDPE bottles are for use with refrigerated centrifuges. Bottles include 43 mm polypropylene screw caps. Dimensions (o.d. x H, mm): 61 x 128.

…visualization of samples, these bottles are ideal for low speed centrifugation of biological and chemical samples. For added leakproof assurance at maximum speeds or when spinning hazardous materials, use with polypropylene sealing caps assemblies; available for 250mL (DS3131-0038) and 1000mL…

…PPCO Centrifuge Bottles, molded of transparent polypropylene copolymer. Ideal for large-volume cell harvesting, pelleting and protein purification, these translucent bottles are autoclavable and have excellent mechanical strength properties. For low to moderate speed centrifugation of…

These PYREX® heavy wall centrifuge bottles have beaded necks and use No. 6 rubber stoppers. These bottles have a small bottom area and are designed for use where relatively small amounts of solids are involved, which permits concentration of sediment for decanting operations. Due to the heavy…

Teflon® FEP Bottles RCF to 4,000 x g Withstand temperatures from -100° to +150°C Flat bottoms Autoclavable bottles have an 80% capacity (approx. 200 mL) in refrigerated centrifuges. Bottles include 38 mm Tefzel® ETFE screw caps. Dimensions (o.d. x H, mm): 62 x 122.

…capacity Centrifuge 5920 R accommodates standard 1 liter Nalgene ® bottles setting a new standard in the table top centrifuge segment. Compared to other custom-made 1 liter bottles the Nalgene bottle is narrow and allows for a better pellet compared to wider bottles. The higher capacity…

…7,000 x g with cushion adapter High-density polyethylene plug-seal screw cap Volume 200 mL Molded volume graduations Sterile Compact design fits table top and floor standing centrifuges with 250 or 500 mL swinging bucket rotors. Dimensions: 60 mm o.d. x 130 mm H. Bottles are not autoclavable.

…tubes and bottles from 0.2 mL to 250 mL Plate rotor for centrifugation of all types of MTP, PCR, cell culture, or Deepwell Plates Fixed-angle rotors for high-speed applications in tubes from 0.2 mL to 85 mL High centrifugation speed of up to 20,913 x g (14,000 rpm) Centrifuge lid with…

…adapters accommodate tubes and bottles from 0.2 mL to 750 mL Plate rotor options for centrifugation of all types of MTP, PCR or Deepwell Plates Fixed-angle rotors for high-speed molecular biology applications in tubes from 0.2 mL to 50 mL High centrifugation speed of up to 22,132 x g…

…Thermo Scientific™ Nalgene™ Polycarbonate Centrifuge Bottles with Sealing Closure, the perfect fit with Thermo Scientific™ Fiberlite™ carbon fiber rotors. Molded of transparent polycarbonate, these translucent bottles are autoclavable and have excellent mechanical strength…

…for added leakproof assurance at maximum speeds or when spinning hazardous materials For proper performance bottles must be filled to 80% of total capacity Requires: When spinning 250mL bottle in a Sorvall GSA rotor, use of the Nalgene centrifuge bottle adapter (DS3125-0250) is required

…fluids after centrifugation, chemical waste, etc. The Aspirator Bottle safely retains up to 1600 mL (54 oz) of fluids while the attached trap protects the vacuum source from accidental fluid backflow. A flexible collection tube reaches from the bottle and accepts disposable 1 mL pipet tips,…

Polyethylene Eliminate rubber adapter clinging to bottle Adapter cushions 250 mL flat-bottom centrifuge bottles.

Vivacell 100: Sample concentration from 20 to 100 ml in swing bucket rotors accepting 250 ml centrifuge bottles. For highest speeds or for particularly difficult samples, pressurize the device with air or inert gas before centrifuging with pressure cap.

…Centrifuges Cell Culture/ Bottles/ Plates Classic/Cooled Developed for large volumes, yet not overly large in size. High performance when it counts, yet cost-effective and fair to your budget. The ROTINA 420 centrifuges offer these benefits and more. The new, compact benchtop centrifuges…

…autoclavable and aerosoltight accessories. These versatile benchtop centrifuges feature a filter plate rotor with an RCF of 6,446 for purifying DNA/RNA. Hettich Rotanta 460 (Series: 1211P91 -1211Q02) Cell Culture/ Bottles/ Plates Features: Temperature control optional (460R) …

…Protection from aerosol leakage and spills from rotor buckets Biocontainment that has been third-party tested Bucket covers for 1.5 mL tubes to 750 mL bottles Microplate carrier covers for 96-well plate format Cool it down The X-14R features a built in refrigeration system.…

Fiberlite F14-6 x 250LE Rotor for 250 mL Nalgene Bottles Rotor Capacity   (places x volume, mL):  6 x 250 mL Maximum Tube  Dimensions  (Ø x L, mm):  62 x 125

…6 x 250 mL bottles 1 Ideal for the pelleting of microorganisms and mammalian cells 12 different adapters for broad range of additional applications Max. speed 15,054xg (10,100 rpm) Eppendorf QuickLock rotor lid for fast lid locking Aerosol-tight 2 for safe centrifugation of…

…the association constant is ≥ 10x10 8 . After trypsinizing cells, resuspend cells in 1 mL trypsin inhibitor solution (1mg/ml) for every mL of trypsin solution used for dissociation. Centrifuge the cell suspension at 1000 rpm for 5 minutes. A cell pellet should form. Remove as much of the…

…(W x D x H): 334 x 425 x 145 mm Weight: 1550 g Thomas No. 8289T12 For various types of vessels with a minimum volume of 50 ml. Ideally more than 250 ml. The clamping rolls may be adjusted to two levels. Dimensions: (W x D x H): 480 x 500 x 120 mm Set-up plate: 420 x 420 mm Weight:…

Thomas No. 8289Q27 For shaking single, non-fixed vessels of 1 - 250 ml. Dimensions (W x D x H): 130 x 135 x 40 mm Weight: 160 g Thomas No. 8289Q32 For up to 36 test tubes or centrifugal tubes with a diameter of 16 mm. Dimensions (W x D x H): 140 x 145 x 115 mm Material: Macrolon …