250 Ml Beaker

…and mechanical strength. For convenience, the 250 through 4000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. Assortment pack consists of one of each: 50 mL, 100 mL, 250 mL, 600 mL, and 1 L. Reference: ASTM E-960.

… Beaker Set 50,100,250,600,1000 (1210B33) Square ratio polypropylene beaker set consisting of  one each: 50ml, 100ml, 250ml, 600ml and 1000ml. Maximum  temperature for PP is 121°C.   Beaker Set 250, 500, 1000 ML (1210B34) Square ratio polypropylene beaker set…

…beaker set consisting  of one each: 50 ml, 100 ml, 250 ml, 500 ml and 1000 ml. Maximum temperature for Polypropylene is 121°C.   Beaker Set, Polymehtylpentene Griffin style Polymehtylpentene beaker set consisting of one each: 50 ml, 100 ml, 250 ml, 500 ml and 1000 ml.…

…volume is easily read in graduations through the beaker’s translucent wall. 1542V13 Variety Pack contains five each of the six sizes. 50 mL beakers: 55 x 44; 100 mL beakers: 74 x 59; 250 mL beakers: 88 x 78; 400 mL beakers: 110 x 80; 800 mL beakers: 135 x 110; 1,000 mL beakers: 145 x 113.

…assortment of popular sizes from our 14005 heavy-duty, low form beaker series. The pack consists of four beakers (one each) in sizes of 250 mL, 400 mL, 600 mL and 1000 mL. Ideal for start-up requirements and customers who need a variety of beaker sizes, but have limited lab space or glassware needs.

…Griffin Beakers with spout are manufactured to provide balance between thermal shock resistance and mechanical strength. For convenience, the 250 through 1000 mL beakers have a double graduated metric scale to indicate approximate content. All sizes have an extra large marking spot. The 10 mL size…

…International Standards for Laboratory Plasticware Accuracy. Graduation intervals: 30 and 50 mL sizes: 5 mL intervals; 100 and 150 mL : 10 mL intervals; 250 mL : 25 mL intervals; 400 and 600 mL : 50 mL intervals; 1,000 mL : 100 mL intervals; 2,000 mL : 400 mL intervals; 4,000 mL : 500 mL intervals.

…can be easily seen through translucent wall Low form beakers have spout and ribs on rim Size 15 mL graduated in 5 mL and 18 oz. intervals; sizes 30 and 50 mL in 5 mL and 14 oz.; sizes 100 and 150 mL in 5 mL and 12 oz.; size 250 mL in 10 mL and 1 oz.; and sizes 400 and 600 mL in 25 mL and 1 oz.

Tri-Pour Beakers have a pour spout on three sides with easy-to-read graduations on the outside of each beaker Polypropylene Graduated: 10 to 50 ml in 10 ml increments and .5 to 1.5 oz in .5 oz increments.

…polystyrene, resistant to diluted or weak acids, alcohols and bases Usable to 200°F, with four-way pour spouts Smaller sizes suitable for use as sampling cup for atomic absorption units, flame photometers and blood cell counters. Graduations on 150 mL and larger, accurate to ±5%.

Made of polypropylene Tricorn™ beakers provide three dripless pouring spouts. Tough, unbreakable and suitable for use with commonly used acids, alkalies and solvents. Autoclavable.

…Beaker 44 mm 100 mL (1212Y93) Product Dimensions (l x w x h) : 1.775x0.56x0in Stir Bar For Beaker 62 mm 250 mL (1212Y94) Product Dimensions (l x w x h) : 0x2.44x0in Stir Bar For Beaker 70 mm 500 mL (1212Y95) Product Dimensions (l x w x h) : 0x2.76x0in Beaker…

…Temperature range: -270° to +250°C Easy to clean Thick, rigid walls are translucent for easy observations of liquid level Beakers have molded-in graduations in mL and ounces PFA is excellent for high-purity work such as electronics manufacturing and environmental testing.

…a white graduated scale. Designed from ASTM Specification E960, Type II requirements. Graduation intervals: 250 and 400 mL beakers: 25 mL intervals; 600 mL beakers: 50 mL intervals; 1,000 mL beakers: 100 mL intervals; 2,000 mL beakers: 200 mL intervals; and 4,000 mL beakers: 500 mL intervals.

… Dipper Sampling Kit (Consists of 1 each below) 1.5' Handle 3' Handle 6' Handle 250 mL Dipping Beaker 500 mL Dipping Beaker 1000 mL Dipping Beaker Stirrer Kit (Consists of 1 each below) 1.5' Handle 3' Handle 6' Handle Stirring…

…and biochemistry. It is possible to thermostat the samples using a recirculating water bath. Electronic speed regulation: from 50 to 850 rpm Stirring volume (H2O): up to 6 beakers, 400 ml each for MULTISTIRRER 6 up to 15 beakers, 250 ml each for MULTISTIRRER 15  

…electrode. Unit includes a 1 mL buret, 5 mL buret, 250 mL beaker, cotton swabs for cleaning electrodes, one bag of 9388J21 phenylarsine oxide solution, 120 mL bottle of potassium iodide solution with 30 mL dropper bottle and 120 mL of pH 4 and pH 7 buffer solution with 30 mL dropper bottle. Power…

…Horizontal gel electrophoresis apparatus, D.C. power supply, automatic micropipets and tips, balance, microwave or hot plate, pipet pump, 250 ml flasks or beakers, hot gloves, safety goggles and gloves, small plastic trays or large weigh boats, DNA visualization system (white light), distilled or…

…Dropping Pipettes, Plastic [1] Beaker, Glass, 50 ml [1] Beaker, Glass, 100 ml [1] Beaker, Glass, 250 ml [1] Evaporating Dish, Porcelain, 70 mm dia [6] Stirring Rods, Glass, 8” [1] Erlenmeyer Flask, Glass, 125 ml [1] Erlenmeyer Flask, Glass, 250 ml [6] Test Tubes, Glass, 18…

…or up to three rinsing positions can be used. The calibration of a pH electrode can also be done on the sample changer. The sample tray with 16 positions is suitable for 150 ml beakers low form and 250 ml tall form. The 150 ml beakers are typical for water analysis with 100 ml sample volume.

…changer. Stirring is only possible from above with a rod stirrer (propeller stirrer). The rod stirrer TZ 1847 is included in the scope of delivery of the TW7400- and TL 7000-TW 7400 modules The sample rack with 42 sample positions is suitable for 150 ml beakers low form and 250 tall form.

…staining tray and net, visualization system (white light), automatic micropipets with tips to obtain samples for 6 gels, pipet pump, 250 mL flask or beakers, hot gloves, distilled or deionized water, microwave, hotplate or Bunsen burner, photo-documentation system (optional) and a balance. Kits…

…mL. The Utility Tray (8289M85) has a 15.75” W x 7.75” D (41 x 20 cm) non-skid surface for Petri dishes or other vessels that do not require clamping. The Flask Holder (8289M90) can accommodate up to four 250 mL flasks at one time. The Universal Holder (8289M95) accepts flasks, beakers,…

…workstation to meet users chemistry needs. For use in benchtop stirring applications from 2 to 250 mL, the StarFish accepts a wide range of standard glassware, including dram vials, test tubes, beakers and round-bottom flasks. It is suitable for simple heating or stirring and for more complex…

…small beakers Compatible with all homogenizer models Thomas No. 1204B85 and 1204B86 Recommended for large beakers and containers Compatible with PRO250 and all benchtop homogenizer models Thomas No. 1204B87, 1204B88 and 1204B89 Recommended for large beakers…

…plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C).  New glass bead indicates full capacity line on 100 mL through 2 L sizes. Bottles have permanent white enamel graduations and marking spots.  

…(W x D x H): 334 x 425 x 145 mm Weight: 1550 g Thomas No. 8289T12 For various types of vessels with a minimum volume of 50 ml. Ideally more than 250 ml. The clamping rolls may be adjusted to two levels. Dimensions: (W x D x H): 480 x 500 x 120 mm Set-up plate: 420 x 420 mm Weight:…

1.5 to 15 mL tubes Holds six tubes or vials Compact footprint This height-adjustable rack securely holds up to six tubes or vials at any desired depth in a water bath or beaker. Rack features a flexible grip that easily retains mixed test tubes or varying weight and volume…