25 Ml Pipets

Compare Tool

Select up to 3 products

25 Ml Pipets
1 - 32 of 51
Sort
View
Show
  • …wrapped pipets peels apart or snaps open easily 25 mL Extended Pipet, Polystyrene (7553T15 & T20) In 0.25 mL divisions, calibrated to tip for blow-out Constriction at top creates chamber for cotton plug 25 mL Extended Pipets feature negative graduations to -5 mL

  • …popular pipet from 0.1 mL up to 25 mL Vacuum-producing units deliver even small quantities simply and accurately. Provides automatic measurement with no hand squeezing, no sucking and no guessing. To use, insert the pipet into the filler and tighten the chuck. Then immerse the pipet in liquid…

  • …requirements. Pipets are calibrated to tip; with volume adjusted for blowing out the last drop. Designated by a ground band near the top. Sizes 5 mL and larger are constricted to retain plug, but this does not affect delivery or cleaning. Tips are Safe-Gard tempered. Large tip pipets are similar to…

  • …size identification. Pipets are sterile, individually wrapped and certified non-pyrogenic. They are accurate within ±2% at full volume while negative graduations provide added capacity (not available on 100 mL 1236X66). An anti-drip tip on 25, 50 and 100 mL pipets reduce…

  • Borosilicate Glass Pasteur Pipets

    DWK Life Sciences (Kimble)

    …ends Tip length of all 5 3/4" pipets is approximately 50 mm. Tip length of all 9" pipets is approximately 120 mm. Constriction approximately 25 mm from mouth end. Controlled Drop pipets deliver at a rate of 22-26 drops per mL. Intended for use with blood typing and cross-matching…

  • Extra Long Transfer Pipets

    Globe Scientific

    Capacity: 6 mL Drops/mL: 25 Bulb Draw: 2.3 mL Total Length: 225mm (9") Stem Diameter: 4.6mm (0.18") Tip Diameter: 2.4mm (0.09")

  • …10 mL sizes of these pipets are almost 3” shorter than comparable disposable serological pipets The 25 mL size is 5” shorter than most comparable reusable pipets All sizes have negative graduations above zero mark; for serological work, ignore graduations and use pipet as…

  • Serological Pipets, Bulk Packed

    Celltreat Scientific

    …CELLTREAT Pipets are packaged in convenient color coded shelf packs that facilitate dispensing through a perforated end panel. Each pipet wrapper includes the lot number. CELLTREAT also offers Serological Pipets in a bulk packaging. These pipets are packed 50 per bag in 1 and 2 mL sizes and 25 per…

  • Serological Pipet, KIMAX-51, Color-Coded

    DWK Life Sciences (Kimble)

    …tempered tip 50 mL size is not color-coded; calibrated to deliver Tolerances: 1/10 mL pipet, ±0.005 mL ; 2/10 mL , ±0.008; 1 mL in 1/10, 1 mL in 1/100 and 2 mL pipets, ±0.02; 5 mL , ±0.04; 10 mL , ±0.06; 25 mL , ±0.10; 50 mL , ±0.16

  • Disposable Milk Pipets

    DWK Life Sciences (Kimble)

    …Methods for Analysis of Dairy Products,” American Public Health Association. Polystyrene milk pipet has a uniform pulled tip Capacity : 1.1mL; subdivision: 0.5, 1.0, 1.1mL Tolerance : ±0.025mL Plugged; sterile Pack of 25; 40 Packs/Case  

  • ABS Plastic Pipet Racks

    Heathrow Scientific

    Durable ABS plastic construction Holds 0.1 mL to 25 mL pipets or cans Features 4 angled compartments Unique “windows” simplify the viewing of enclosed pipets. Comes with optional attachments to hold pipet bulbs and pipet fillers on both sides of the rack. Measures 3-1/2" x…

  • MLA Macro Pipettors And Tips

    VistaLab Technologies

    …graduated from 1-5 mL in 0.5-mL increments; 7735G40 graduated from 2-5 mL in 1-mL increments Accuracy ±1%; reproducibility ±0.5% Without tips, see Thomas number 7735G37 Disposable Polypropylene Pipet Tips (7735G37) For use with MLA Macro pipets Non-wetting…

  • …while insuring top-to-bottm mixing Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets Flasks are manufactured from Type I, Class A borosilicate glass Polypropylene sidearm caps are supplied

  • …non-sterile tips to offer nearly 60 different volume settings in as many as 48 steps without refilling the syringe tip Includes adapter for use with 25 and 50ml tips (adapter pack also available separately) Maintenance-free; no internal wear-and-tear parts Includes instructions in English,…

  • …stirring. Consistent height-to-width ratios provide greater predictability in scale up across the full range of vessel sizes.  Center necks measure 120 mm. Sidearm necks are 45 mm and permit easy entry of 25 and 50 mL pipets for feeding and harvesting.  Capacities range from 3 to 36 L.

  • …aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets All components are autoclavable Flasks are manufactured from Type I, Class A borosilicate glass Cap and impeller components are…

  • …to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination since there is no need to insert the pipettor barrel into the tube to retrieve samples Available non-sterile or sterile and…

  • …aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm threads accept 25 mL and 50 mL pipets All components are autoclavable Flasks are manufactured from Type I, Class A borosilicate glass Cap and impeller components are…

  • …to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination since there is no need to insert the pipettor barrel into the tube to retrieve samples Available non-sterile or sterile and…

  • …to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination since there is no need to insert the pipettor barrel into the tube to retrieve samples Available non-sterile or sterile and…

  • …to increase aeration Bottom flask bump prevents material from accumulating at the center of the bottom surface Large sidearm accepts 25 mL and 50 mL pipets All components are autoclavable Flaks are manufactured from Type I, Class A borosilicate glass Cap and impeller are made from FDA…

  • …associated with decanting or pipetting. ?? Sterivex units are designed to dispense into virtually any storage container. The devices are available with different outlet connections ?? Sterivex filter units can process volumes up to 1,000 mL or 2,000 mL, depending on the type of membrane…

  • …in each carton Lot number for complete traceability Accuracy of +/- 1% for nominal volume Clear black printed graduations for maximum clarity Descending and ascending graduations to aid pipetting Negative graduations for extra capacity Color coded for ease of identification

  • …aeration and agitation of contents of the flask. Unique impeller design ensures optimal stirring. Sidearm designs permit easy access of 25 mL and 50 mL pipets. Reusable Glass Spinner Flask is designed to improve cell growth by keeping the culture media moving and improving aeration at…

  • …Plates fit snugly inside thermal cyclers and decks of automated liquid handling systems. Exact hole placement aids multi-channel pipetting. Elevated rims provide sturdy non-flexing performance. Thin wall plates have a capacity of 0.2 mL and come individually wrapped in packs of 25.

  • Designed for cordless work with glass or plastic pipettes Max. aspiration rate of 25 mL in 4.3 seconds Touch-control of aspiration rate Ergonomic handle Precision valve system The FastPette™ features high and low aspiration speeds and gravity or pump-supported…

  • …a 25-mL pipette in 3 seconds Accepts glass or plastic serological pipettes, from 1 to 100 mL Avoid battery depletion with auto shut-off after 5 minutes of inactivity Easily fine tune pipetting speed with thumbwheel control and speedometer display Key Features and Benefits …

  • …It can handle a volume range from 0.1 to 100 mL. Optimal Speed Control MACROMAN aspiration and dispensing speed can be set using pressure sensitive triggers or by using the thumbwheel while pipetting. The speed is adjustable up to 25 mL in less than three seconds. The screen continuously…

  • …that is perfectly suited for use with all commonly used glass or plastic pipettes. The powerful yet quiet pump of the AccuHelp Controller can fill a 25 mL serological pipette in under 4 seconds. The soft grip push buttons create increased ergonomics for the user. The pipette cone is autoclavable and…

  • CAPP Harmony Serological Pipettes

    Oxford Lab Products

    …Serological Pipettes, 5 mL, Blue, Sterile, DNase/RNase free, Individually Wrapped, 200 Pcs/Case CAPP Harmony Serological Pipettes, 10 mL, Orange, Sterile, DNase/RNase free, Individually Wrapped, 200 Pcs/Case CAPP Harmony Serological Pipettes, 25 mL, Red, Sterile,…

  • …package comes with hardware you need to run the ASBC approved method. Hardware Package includes:1000 mL, 100 mL, 25 mL Volumetric Class A Glass Flask; 0.1-1.0 mL & 1.0-10 mL Tensette Pipet; 0.1-1.0 mL & 1.0-10.0 mL Pipet Tips, 50/pk-250/pk. Reagents available as Part Number 45970.

  • Choose from four styles - 25 mL Divided, 25 mL , 50 mL and 100 mL “V” bottom design allows for maximum recovery of reagents Graduated with convenient pouring spouts at all four corners Extra wide base for increased stability Unique “Nesting” feature makes separation of…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.