24/40 Thermometer Adapter

Compare Tool

Select up to 3 products

24/40 Thermometer Adapter
1 - 16 of 16
Sort
View
Show
  • Tube 24/40

    Corning

    These PYREX® thermometer adapters have a 24/40 Standard Taper ground joint at one end while the other end is tooled to accommodate a thermometer. The adapter comes with a rubber thermometer holder. For replacement rubber thermometer holders, see No. 7715 (0319W06). This tube is also a…

  • Adapter Univ Sz 21 24/40

    DWK Life Sciences (Kimble)

    For use with plain thermometers, pipets, syringes or other small items with an OD from 2 to 17 mm. A vacuum-tight seal is created with the open top compression cap and FKM o-ring to allow adjustable immersion of thermometers Cap is suitable for use to 150 °C To use it as a septum…

  • Still, Short Path, with 24/40 Joints

    Ace Glass

    …size 24/40 jointed, low holdup, short path still, original plain version or jacketed with indents. Extension tube from still body allows positioning of drop directly over receiver flask. Gas inlet tube is positioned in distillation flask with 5028 Adapter and secured with a #7 Ace-Thred. Thermometer

  • Poly-Cone Universal Joint Adapter

    Bel-Art - SP Scienceware

    …to 30/50 (accommodates 34/45 to 29/42) (B) 30/50 to 25/50 (accommodates 29/42 to 24/40) (C) 25/50 to 20/50 (accommodates 24/40 to 19/38) (D) 20/50 to 15/50 (accommodates 19/38 to 14/35) (E) 15/50 to 10/50 (accommodates 14/35 to 10/30) (F) 10/20 to 5/20 (accommodates thermometers,

  • Gas Evolution Measurement Apparatus

    Chemglass

    …capacities: 50ml, 250ml and 1000ml. All complete units supplied with a buret, a CG-3502-04, -10 to 260º thermometer, a CG-1042-01 24/40 thermometer adapter and a leveling bulb with a 24/40 top outer and a lower detachable hose connection. The leveling bulb capacity varies with the capacity of…

  • Adapter, Claisen, Stopcock

    Ace Glass

    Claisen adapter. Center tube has 10/30 outer top for 76mm immersion thermometer and a 24/40 inner bottom. 75 degree take-off arm with 24/40 outer top and 24/40 inner stopcock side arm. Available with glass or PTFE stopcock plug.

  • Adapter, Claisen, #7 Ace-Thred

    Ace Glass

    With 24/40 standard taper joints and top side arm with #7 Ace-Thred for use with 5029 Nylon bushing and adjustable length thermometer. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.

  • Adapter, Twin, with #7 Ace-Thred

    Ace Glass

    …joint at bottom, one #7 Ace-Thred and one 10/18 outer joint, offset at the top. Threaded opening will accept 6.5 to 7mm dia. thermometers, bleed tubes, etc. The 24/25 medium length joint is compatible with a full length 24/40 joint. Supplied complete with 5029-10 Nylon bushing and FETFE O-Ring.

  • Distilling Heads

    Chemglass

    …a condenser sealed to the adapter at a 75º angle. The top outer joint on the 14/20 size can be converted to a 10/18 thermometer joint by using a CG-1016-27 bushing adapter. The sidearm is sealed at a height for use with a 1” immersion thermometer. The 24/40 and 29/42 sizes are made to…

  • Glass Joints

    Corning

    …as a thermometer opening in the form of an outer Standard Taper 10/30 joint 5738L18 is similar to 5738H82 except all joints are 24/40. Length 160 mm. Still Head Claisen type three-way Connecting Tubes (5738S18) 24/40 outer joints at top 24/40 inner joint at bottom Adapter,

  • Gooseneck Distilling Condensers

    Chemglass

    …condenser and vacuum adapter in a compact one-piece unit. Available with a choice of three sizes of condensers with uptake inner joint as listed. Top thermometer joint is a 10/30 outer for use with a 3in immersion CG-3506 thermometer. Receiver joint on all sizes is a 24/40 inner having a sealed-in…

  • Distillation Head, Vacuum Type

    Ace Glass

    …are 24/40 with the exception of a 10/18 thermometer joint which will accept our 5028-24 adapter and 6.4mm thermometers such as our 8294 and 9548 series. The distilled solvent may be collected directly into a 24/40 Schlenk tube. 14/20 tubes may also be used with our 9092 code -26 or -27 adapters.

  • Short Path Distillation Kit

    United Scientific Supplies

    …bottom flasks. The 250ml round bottom 2-Neck flask includes 24/40 outer joints to accept the Distillation Head and the Rubber Inlet Adapter. The Rubber Inlet Adapter holds the tapered Glass Inlet Tube. The Thermometer, with a range of -10° to 50° C and filled with a petroleum-based…

  • Solvent Distillation Apparatus, Airfree®, Schlenk

    Chemglass

    …graduated reservoir. Delivery adapter is fitted with a 12/5 spherical joint for flexibility and a 0-4mm Chem-Vac™ Chem-Cap® valve (D) for purging of the receiving vessel. Top outer joint is a 24/40 while the uptake tube is a 24/40 inner joint. Delivery adapter has a 14/20 inner joint and…

  • Distillation Head, Vigruex, Jacketed

    Chemglass

    …Vigreux distillation head having a sealed on condenser, braced for strength. The top outer joint is for a 1” immersion 10/18 or 10/30 thermometer. Vacuum adapter has an inner joint and a sealed in drip tip. Condenser length is 100mm on the 14/20 size and 200mm on the 24/40 and 29/42 sizes.

  • Solvent Distillation Apparatus, Airfree®, Schlenk

    Chemglass

    …flask with a thermocouple or thermometer adapter. The delivery tube has two 2mm PTFE straight bore stopcocks that can be operated in a way to purge the receiving vessel with inert gas. Capacity of solvent storage area is approx 250mL with a 24/40 top outer and a 24/40 lower inner standard taper…

Compare Tool

Select up to 3 products

Please Log In

Don't have an Account? Create one now.