24 Well Insert

Compare Tool

Select up to 3 products

24 Well Insert
1 - 32 of 54
Sort
View
Show

elpro

  • …including 6, 12, and 24 well      A broad selection of membrane pore sizes, 0.4, 1.0, 3.0, and 8.0 µm diameter     Packed in individual blister packs, 48 inserts/case      Non-Tissue Culture-treated insert housings prevent promiscuous…

  • … Two versions available HTS Transwell 24 well microplates feature a 0.4 µm pore polyester membrane and 6.5 mm inserts. 8600A44 is 12 HTS Transwell-24 units loaded trays. 8600A45 is two HTS Transwell-24 units loaded into two open reservoir trays and two individually wrapped 24 well plates.

  • These specially designed Netwell carriers and handles allow simultaneous processing of up to 6 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.

  • …assays. These insert systems offer all the benefits of Falcon Individual Cell Culture Inserts in an automation-friendly format that is compatible with most robots and fluid handlers. The Falcon 24 Multiwell Insert Plate is a single unit that is compatible with all Falcon 24 well plates and…

  • 24 Well ComboPlate™

    Greiner Bio-One

    …CrystalBridge™ inserts, necessary for sitting drop crystallisation, fit neatly into the wells of ComboPlate™. Each CrystalBridge™ features a round bottom indentation to accommodate 45 μl of sample. A CrystalBridge™ can easily be transferred to another well during or after…

  • …phase contrast microscopy. Growth surface area is 4.5 cm 2 . Its patented self-centered hanging design prevents medium wicking between the insert and the outer well. Design permits access to lower compartment through window in the insert wall. Packaged 6 inserts in a 6 well plate, 4 plates per case.

  • These 24mm diameter Netwell inserts have 440µm polyester mesh bottoms attached to polystyrene inserts They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Provides coarse filtration of tissue…

  • 10µm thick transparent polyester membrane Treated for optimal cell attachment Packaged 12 inserts in a 24 well plate, 4 plates per case Membrane must be stained for cell visibility Sterilized by gamma radiation

  • 10µm thick translucent polycarbonate membrane Treated for optimal cell attachmentPackaged 6 inserts in a 6 well plate, 4 plates per caseMembrane must be stained for cell visibilitySterilized by gamma radiation

  • …and two individually wrapped 24 well plates. 8600B36 is for use as a reservoir tray with Transwell permeable supports. Reservoir is not treated for cell attachment but is sterilized by gamma radiation. Unit has the same footprint as a standard 24 well plate but with a single rectangular well.

  • …drug discovery process Handle 24 inserts simultaneously—all 24 wells are part of a single unit that is compatible with Falcon 24 well Plates and Feeder Tray Each insert has a generous, automation-compatible sampling port. When used with Falcon 24 well plates, users can sample above and…

  • inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. 6.5 mm microplates have either a 0.1, 0.4, 3.0 or 5.0 µm pore polycarbonate insert and are packaged 12 inserts in a 24 well plate with 4 plates per case. Inserts

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Two 24 well plates included in each case.

  • … Two models are available: 8600A51 24 mm Transwell inserts have a 0.4 µm pore polycarbonate insert while the 8600A53 Transwell inserts have a 3.0 µm pore polycarbonate insert. 8600A62 microplates also have a 3.0 µm pore polycarbonate insert and offer excellent visibility under…

  • …with all FluidX sample storage tubes as well as any 2D data matrix barcoded tubes, including those supplied by Greiner, Matrix,Nunc and Micronic Any tube size can be read. Orbit will quickly scan tubes in 24, 48, 96, 240 and 384-well rack formats, as well as larger capacity tubes including glass…

  • HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly  holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies.…

  • …Featuring a new 24 x 2 mL rotor with a ClickSeal™ bio-containment lid certified by CAMR. High Productivity The extensive rotor selection and 17,000 and 21,000 x g options give the Heraeus Pico & Fresco series the speed and versatility to carry out complex as well as simple…

  • …24-well microplates with polyester membrane inserts are available with 0.4 µm or 3.0 µm pore sizes. Features include 10 µm thick transparent polyester membrane that has been sterilized by gamma radiation. There are 12 inserts in a 24 well plate with 4 plates per case.

  • …electron microscopy Membranes will not tear or curl and remain easy to handle when removed from insert housing Corning® BioCoat™ Cell Culture Inserts offer: Corning® Falcon® Cell Culture Inserts’ innovative hanging design facilitates pipetting and reduces risk of medium wicking Corning®…

  • insert allows set up to be completed without inclusion of an upper buffer chamber. CASTING ADVANTAGES Dual purpose PAGE insert eliminates time consuming transfer of glass plates between separate casting and gel running components Glass plates with bonded spacers assure clean well

  • …readable without removing tubes from racks Manufactured from chemically-inert glass with low binding and low static properties, customized PTFE inserts available as an option for aggressive chemical Securely sealed using screw caps Overview Developed to exceed the demands of sample…

  • …Cell Culture Inserts’ innovative hanging design facilitates pipetting and reduces risk of medium wicking Corning® Falcon™ Companion Plates’ labyrinth lid design and condensation rings reduce evaporation and risk of contamination Choice of 6, 12, and 24 well plate sizes An…

  • …at 24 rpm. Interchangeable rotisseries hold numerous tube sizes. The Mini LabRoller Rotator is supplied with a rotisserie for 36 x 1.5 or 2.0 ml tubes. Two additional rotisseries are available separately. The first accommodates ten conical 15 ml or other tubes with a 15-17 mm diameter as well

  • HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies. …

  • HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly  holder. This single-unit design makes insert plates ideal for running automated, high throughput  drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion…

  • HTS insert plates are arrays of individual cell culture inserts connected by a rigid, robotics-friendly holder. This single-unit design makes insert plates ideal for running automated, high throughput drug transport (Caco-2 cells) cell toxicity studies or cell migration and invasion studies. …

  • …dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm) steel grinding balls (2155) from titer plates…

  • …Plate, Round Wells : Round 2.0 mL wells, rugged polypropylene, alphanumeric marks for well identification. For use with the 2650 Cryo-Block, which is inserted in gaps between wells to keep plates and samples chilled to preserve RNA for extraction. 2210 96-Well Titer Plate, Round Wells : Same…

  • Human Spinal Models

    Walter Products

    …B10237) This 50cm mini spinal column consists of 24 vertebrae with soft vinyl discs, sacrum, coccyx, and pelvic bones with femur heads. Nerve endings are exposed. Comes with a hanging stand and labeled diagram. Dimensions: 3 x 6 x 24". This replica of the cervical spinal column consists of…

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Four 6 well plates included in each case.

  • …AeraSeal™ The SealMate dispenser provides a protective enclosure for films on the roll prior to dispensing. It can be opened, permitting insertion of a new roll, then closed and latched securely by means of clasps at each side of its film-dispensing “bill.” Individual films…

  • inserts, attachment or suspension cells can access media from both their apical and basolateral sides. Cell growth, structure, and function more closely mimic what occurs in vivo. In addition, Millicell® inserts make it possible to study both sides of the cell monolayer.Millicell® Standing Inserts:-

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.