24 Well Insert

Compare Tool

Select up to 3 products

24 Well Insert
1 - 32 of 42
Sort
View
Show
  • … Two versions available HTS Transwell 24 well microplates feature a 0.4 µm pore polyester membrane and 6.5 mm inserts. 8600A44 is 12 HTS Transwell-24 units loaded trays. 8600A45 is two HTS Transwell-24 units loaded into two open reservoir trays and two individually wrapped 24 well plates.

  • Falcon® Permeable Support for 24 well plates features transparent PET membrane with 1.0μm pores. Sterile, 1/blister pack, 48/case Storage: Store at room temperature, away from direct sunlight.

  • Falcon® Permeable Support for 24 well plates features transparent PET membrane with 0.4μm pores. Sterile, 1/blister pack, 48/case. Storage: Store at room temperature, away from direct sunlight

  • These specially designed Netwell carriers and handles allow simultaneous processing of up to 6 Netwell inserts per carrier Each carrier kit contains eight carriers and eight handles.

  • Falcon® Permeable Support for 6 well plates features transparent PET membrane with 3.0μm pores. Sterile, 1/blister pack, 48/case. Storage: Store at room temperature, away from direct sunlight.

  • …phase contrast microscopy. Growth surface area is 4.5 cm 2 . Its patented self-centered hanging design prevents medium wicking between the insert and the outer well. Design permits access to lower compartment through window in the insert wall. Packaged 6 inserts in a 6 well plate, 4 plates per case.

  • 24 Well ComboPlate™

    Greiner Bio-One

    …CrystalBridge™ inserts, necessary for sitting drop crystallisation, fit neatly into the wells of ComboPlate™. Each CrystalBridge™ features a round bottom indentation to accommodate 45 μl of sample. A CrystalBridge™ can easily be transferred to another well during or after…

  • … Two models are available: 8600A51 24 mm Transwell inserts have a 0.4 µm pore polycarbonate insert while the 8600A53 Transwell inserts have a 3.0 µm pore polycarbonate insert. 8600A62 microplates also have a 3.0 µm pore polycarbonate insert and offer excellent visibility under…

  • Corning® Falcon™ Multiwell 24 well insert system. 1 µm pores,High Density PET Membrane. 5/blister pack.

  • …and two individually wrapped 24 well plates. 8600B36 is for use as a reservoir tray with Transwell permeable supports. Reservoir is not treated for cell attachment but is sterilized by gamma radiation. Unit has the same footprint as a standard 24 well plate but with a single rectangular well.

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Four 6 well plates included in each case.

  • insert allows set up to be completed without inclusion of an upper buffer chamber. CASTING ADVANTAGES Dual purpose PAGE insert eliminates time consuming transfer of glass plates between separate casting and gel running components Glass plates with bonded spacers assure clean well

  • …dispenses one 5/32 in. (4 mm) steel grinding ball (2150) into each well of a standard 96-well titer plate, including 2200 and 2210 titer plates. 2110M 24-Pin Magnet: 24 magnet-tipped pins on plate with handle. Inserts or removes 3/8 in. (9.5 mm) steel grinding balls (2155) from titer plates…

  • Corning® FluoroBlok™ HTS colored PET Membrane Inserts for 24 well plates with either 3.0µm or 8.0µm pores. Corning FluoroBlok Inserts block light transmission, simplifying detection of migrating, fluorescently labeled cells. Inserts are Sterile. Store at room temperature, away…

  • …at 24 rpm. Interchangeable rotisseries hold numerous tube sizes. The Mini LabRoller Rotator is supplied with a rotisserie for 36 x 1.5 or 2.0 ml tubes. Two additional rotisseries are available separately. The first accommodates ten conical 15 ml or other tubes with a 15-17 mm diameter as well

  • inserts are easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines. 6.5 mm microplates have either a 0.1, 0.4, 3.0 or 5.0 µm pore polycarbonate insert and are packaged 12 inserts in a 24 well plate with 4 plates per case. Inserts

  • …24-well microplates with polyester membrane inserts are available with 0.4 µm or 3.0 µm pore sizes. Features include 10 µm thick transparent polyester membrane that has been sterilized by gamma radiation. There are 12 inserts in a 24 well plate with 4 plates per case.

  • … Hi/Lo Alarms and Time/Date Stamps Alarm tracking feature stores in memory each alarm event detailing when the alarm state occurred, as well as when the unit returned back to within range. Alarm state indicators include visual LEDs, audio alerts, and flashing LCD segments. Data for up to…

  • …bovine placentae. Unlike traditional coating techniques that result in occluding film layers, our proprietary coating process results in a biologically stable collagen that covers every fibril of the filter matrix, retaining the porosity of the membrane. Two 24 well plates included in each case.

  • …Cell Culture Inserts’ innovative hanging design facilitates pipetting and reduces risk of medium wicking Corning® Falcon™ Companion Plates’ labyrinth lid design and condensation rings reduce evaporation and risk of contamination Choice of 6, 12, and 24 well plate sizes An…

  • …AeraSeal™ The SealMate dispenser provides a protective enclosure for films on the roll prior to dispensing. It can be opened, permitting insertion of a new roll, then closed and latched securely by means of clasps at each side of its film-dispensing “bill.” Individual films…

  • …Falcon® Cell Culture Inserts’ innovative hanging design facilitates pipetting and reduces risk of medium wicking Corning® Falcon® Companion Plates’ labyrinth lid design and condensation rings reduce evaporation and risk of contamination Choice of 6, 12, and 24 well plate sizes An…

  • …electron microscopy Membranes will not tear or curl and remain easy to handle when removed from insert housing Corning® BioCoat™ Cell Culture Inserts offer: Corning® Falcon® Cell Culture Inserts’ innovative hanging design facilitates pipetting and reduces risk of medium wicking Corning®…

  • 10µm thick transparent polyester membrane Treated for optimal cell attachment Packaged 12 inserts in a 24 well plate, 4 plates per case Membrane must be stained for cell visibility Sterilized by gamma radiation

  • 10µm thick translucent polycarbonate membrane Treated for optimal cell attachmentPackaged 6 inserts in a 6 well plate, 4 plates per caseMembrane must be stained for cell visibilitySterilized by gamma radiation

  • Sterile cell culture insert. Falcon® Permeable Support for 6 well plates. Track-etched polyethylene terephthalate membranes have a smooth surface and defined cylindrical pores that traverse the membrane Low-protein binding Sterilized by gamma irradiation Membranes are easily…

  • These 24mm diameter Netwell inserts have 440µm polyester mesh bottoms attached to polystyrene inserts They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Provides coarse filtration of tissue…

  • …In use, the unique media Feeder Tray enhances well-to-well uniformity by bathing all 24 inserts in the same medium. The system is designed for use with most robotics that accept Corning® Falcon™ 24 well plates. The system may also be used manually with individual or multi-channel pipetters.…

  • …environment. The Invasion Chambers consist of a Corning® Falcon™ Cell Culture Insert with an 8 µm pore size PET membrane, uniformly coated with Corning® Matrigel®™ Matrix, packaged ready-to-use in 24 well formats. The Corning® Matrigel®™ Matrix/GFR Matrigel® Matrix serves as a…

  • …Plate, Round Wells : Round 2.0 mL wells, rugged polypropylene, alphanumeric marks for well identification. For use with the 2650 Cryo-Block, which is inserted in gaps between wells to keep plates and samples chilled to preserve RNA for extraction. 2210 96-Well Titer Plate, Round Wells : Same…

  • The heating thermostats A 6, A 12 and A 24 operate in the temperature range between 25 and 85 °C. As in the case of the immersion thermostats, a cooling coil and pump circulation set as well as a bath cover set are available as optional accessories. 3-button operation with large, clearly…

  • …Featuring a new 24 x 2 mL rotor with a ClickSeal™ bio-containment lid certified by CAMR. High Productivity The extensive rotor selection and 17,000 and 21,000 x g options give the Heraeus Pico & Fresco series the speed and versatility to carry out complex as well as simple…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.