2 Ml Vial Rack

Compare Tool

Select up to 3 products

2 Ml Vial Rack
1 - 32 of 53
  • Diameter: 14 mm

  • vials (fits 6, 10, or 20 mL vials). Vials lock in rack for convenient one-handed cap removal. Openings in the bottom of each well facilitate drainage. Alphanumeric indexing on rack simplifies sample identification. Easy to clean and fully autoclavable.* Stackable—even with vials

  • Racks feature alphanumeric indexing for easier vial identification. Racks can be stacked for efficient storage. Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).

  • Fits in all standard 5.25 inch freezer racks Alpha-numerically indexed - right on the box itself Frosted marking panel on 2 sides These new boxes are designed to hold 81 cryogenic vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of…

  • …Cryogenic Vial Racks are specially designed for Cryogenic vials and are available in four models with 15 to 45 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.0 ml to 2.0 ml inner and outer threaded Cryogenic vials. They…

  • The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

  • White Polycarbonate Cryogenic Vial Holders

    Thermo Scientific Nalgene

    …with base of Nalgene cryogenic vial so that vial will not turn during opening and closing For positive vial identification numbers and letters are molded into each holder's upper surface. Designed to hold 1.2, 2.0 and 5.0 mL sizes of Nalgene cryogenic vials. Autoclavable; solid construction…

  • vials up to 2.0 mL Stackable, autoclavable and with alphanumeric well identification standard cryogenic vials up to 2.0 mL Will fit into standard 2" (52 mm) freezer racking standard cryogenic vials up to 2.0 mL Open dimensions 310 x 128 x 33.5 mm standard cryogenic vials up to 2.0 mL

  • …eight 80-well microtube racks filled with either 1.5 or 2.0 mL microtubes. These racks help you keep large numbers of microtubes organized on your benchtop. Plenty of room to slide the racks in and out. Vertical rack measures 236 x 157 x 234 mm; horizontal rack measures 310 x 236 x 122 mm.

  • Rack cover for 1 mL & 2 mL vials (4" x 10.5" x 1.5")

  • GeNunc Storage Boxes and Racks

    Thermo Scientific Nunc

    … Storage Vial Racks For use with 6830A40 and 6830A42 storage vials Stores twenty-four 0.5 mL and/or 2.0 mL vials in four-by-six array Polyketone racks are chemically-resistant to most laboratory chemicals and autoclavable at 121°C for 20 minutes. The rack enables single-handed vial

  • Cryogenic Vial Storage Boxes

    Thermo Scientific Nalgene

    …of 1.2 and 2.0 mL cryogenic vials Usable in a wide range of environments and temperatures (-196 to +121°C) Numerical grid system, which is molded into box with corresponding numbers printed on lid 25-place boxes are arranged in a 5 x 5 array and measure 3” x 3” x 2”. 81-place…

  • CryoELITE™ Cryogenic Storage Vials

    DWK Life Sciences (Wheaton)

    1.2, 2.0, 3.0, 4.0 and 5.0 mL volumes Free-standing or round bottom configuration Seven different cap colors, blue, pink, green, yellow, red, white and natural are standard on the 2.0 mL sizes. All vials are batch certified DNase and RNase free, non-pyrogenic and endotoxin free and are…

  • Box Rack Storage Tanks

    Horizon Scientific

    ABS CryoMax System Vial Capacity: 750 (2ml) Total Box Capacity: 30 Rack Capacity: 6 Boxes per rack: 5 Vials per box: 25 Liquid Nitrogen Capacity: 47.4 liters Static Evaporation Rate: .39 liters/day Static Holding Time: 76 days Neck Diameter (mm): 127 Exterior Height…

  • …-90°C Reusable Hinged lid Racks are available in 50-place or 100-place versions. Both accommodate all 1.5/2.0 mL microtubes and standard 2.0 mL cryo vials. Lids have raised edges to allow safe, non-slip storage of multiple racks. The racks are alphanumerically matrixed with the…

  • …and 2.0mL tubes. These racks fit into Labcon pipet tip boxes and are made of recycled plastic. Fully autoclavable (122°C) and freezable (-190°C). Stackable racks float in your water bath and can in corpo rate dry ice for use with frozen samples on the bench. Holds 1.5, 1.7, 2.0 mL

  • Large Grinding Vial Set

    SPEX SamplePrep

    …cylinders (6801C4). Makes one complete vial plus three spare center sections. Transparent plastic allows visual check of grinding progress. Sample capacity up to 50 mL. Vial Rack for Large Grinding Vials: Epoxy-coated steel rack holds six 6801 or 6871 Vial Sets for storage and handling. One…

  • …Grinding load per vial 1.5 mL. Vials can also be used with 2662 Cryo-Block or 2190 Vial Rack. Case of 10 sets, each set containing 24 vials pre-loaded with steel balls. 2241-PC Polycarbonate Vial : 5 mL polycarbonate vial with screw-on polyethylene cap. 1/2 in. diameter x 2 in. long (12.7 mm x…

  • …Alpha-numeric sample identification 100 x 1.5 to 2.0 mL tube capacity Axygen Microcentrifuge Tube Rack Axygen Microcentrifuge Tube Rack is molded from durable, autoclavable polypropylene, and features non-skid rubber feet. The rack has two levels and exhibits wide spacing to provide…

  • 81-Well Microtube Storage Boxes

    Heathrow Scientific

    Compact footprint for microtube and cryogenic vial storage. Made from polypropylene Store microtubes or cryogenic vials Easy open, friction fit lid Safe for low temperature storage Tubes: 1.5/2.0 mL Wells: 81 Well Dia: 12.3 mm Dimensions: 5.1 x 5.1 x 1.9 in (13 x 13 x…

  • 100 Place Cryo Storage Boxes

    Argos Technologies

    …alpha-numeric grid Manufactured in translucent polypropylene, these freezer boxes can accommodate 0.5, 1.5 and 2.0 mL microtubes as well as most manufactured brands of cryogenic vials. The boxes are slightly taller than most competitive freezer boxes and can store tubes up to 53.5 mm in height. …

  • Sterile, Polypropylene Cryogenic Vials

    Thermo Scientific Nalgene

    …has a sealing ring in conjunction with specially designed threads which allows the best possible seal. Dimensions: 1.2 mL vials measure 13.5 mm o.d. x 38 mm; 2.0 mL vials measure 13.5 mm o.d. x 48.3 mm; 5.0 mL vials measure 13.5 mm o.d. x 92 mm. For bulk- packaging, see Thomas series 5150G34.

  • Nominal capacity of 5 ml, accepts bar codes and fits into most racks for high-volume analyzers. In addition to being used as a serum tube, it can also be used as a transport vial and a storage vial

  • Trays for Vials


    High pressure for 96 well inserts, microliter has a full line of lc and gc chromatography consumables and can help you determine the best products for your application.

  • Novarack Tube Storage Racks

    Diversified Biotech

    …storage racks for 0.5 mL to 50 mL tubes Saves space Durable Stores a wide range of tube sizes Uniquely designed to provide versatility and flexibility needed in today’s laboratory. The ergonomic design provides universal housing for test tubes and vials of different…

  • …and 384 ANSI/SLAS format tube racks Honeycomb style racks 4 mL glass vials with 2D barcodes Cryovials with 2D barcodes Custom racks Single tubes Detailed Feature List Scans and decodes a rack in 96 well rack in 8 seconds; 384 well rack in 9 seconds Single tube…

  • racks 4 mL glass vials with 2D barcodes Cryovials with 2D barcodes Custom racks *384 racks pending labware review—please inquire. Detailed Feature List Scans and decodes an 81/100 format cryobox in less than 3 seconds Scans and decodes a rack in 96 well rack

  • …tubes and 2.0mL cryo- vials. These double-sided racks hold 1.7mL and 2.0mL tubes on one side and 0.5mL on the reverse side. Rack and clear lid are fully autoclavable (122°C) and freezable(-80°C). Made of polypropylene. 96 Place Holds 0.5 mL microtubes on one side or 1.5, 1.7, 2.0 mL

  • … 5mL x 0. 63mm outer diameter syringe 2mL clear sample vials (144) 2mL amber sample vials (100) blue crimp caps with septa (100) green crimp caps with septa (100) red crimp caps with septa (100) septa for waste/wash vials (100) crimper - 11mm decapper - 11 mm 2 mL vial rack

  • …ANSI/SLAS format tube racks Honeycomb style racks 4 mL glass vials with 2D barcodes Cryovials with 2D barcodes Custom racks *384 racks pending labware review—please inquire. Detailed Feature List Scans and decodes a rack in 96 well rack in 1 second …

  • Auto JR

    Horizon Scientific

    … - (6) 10-2 Racks - (1) Pair CryoGloves - (1) LN2 Measuring Ruler ABS Auto Jr. with Polycarbonate Package System Total Vial Capacity (2 mL vials): 6000 Total Box Capacity: 60 Rack Capacity: 6 Boxes per rack: 10 Vial per box (2 mL): 81/100 LN2…

  • …and white. *Evergreen does not recommend the use of screwcap vials, including CryoSure® vials, for immersion in liquid nitrogen or other liquified gases. Immersion in liquid nitrogen may cause leakage in CryoSure® vials and also presents the potential danger of rapid pressure buildup…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.