2 Ml Tube Rack

Compare Tool

Select up to 3 products

2 Ml Tube Rack
1 - 32 of 175
Sort
View
Show
  • 80-Place Tube Racks

    labForce (a Thomas Scientific Brand)

    80-Place Tube Racks. Fraction collector plate style. Versatile & efficient storage in bright, fluorescent colors. Holds tubes up to 2 mL, 11 x 26mm maximum. Rack dimensions: 226 x 67 x 28mm. Container dimensions: 236 x 85 x 52mm.

  • …at a glance Numeric markings for sample identification Versatile design accommodates different tube sizes on each side The four sides hold the following tubes: Four – 50mL tubes Twelve – 15 mL tubes Thirty two – 1.5mL tubes Thirty two – 0.5mL tubes

  • Reinforced polypropylene (PP) is autoclavable Shipped flat to save shelf space and quickly assembled when needed Dimensions (L x W x H): 270 x 130 x 30 (10.6" x 5" x 1.2")

  • 96-Well Reversible Rack

    Heathrow Scientific

    mL tubes on one side to 96 wells for 1.5/2.0 mL tubes on the other side. Wells are arranged in standard 8 x 12 array. Handy lid snaps into place via tabs on each end of rack. 0.5 mL wells are separated by molded-in grid lines, making them easier to see, and raised rings are around the 1.5 to 2.0 mL

  • The standard for cryogenic storage, this 81-well rack works with all 0.5, 1.5 and 2.0 mL cryovials. The 9 x 9 matrix rack is designed to replace 5 1/4” x 5 1/4” cardboard freezer storage boxes. The storage rack holds up to 81 tubes and comes complete with a clear polypropylene lid and…

  • …close. Posts next to tubes are numbered letting you locate the sample you need quickly. Stackable, autoclavable (122°C) and freezable (-190°C). Made of polycarbonate. 100 Place With separate lid Holds 0.5 mL screw cap microtubes on one side or 1.5 and 2.0 mL microtubes Made of…

  • Posi-Click™ 2.0 mL Microcentrifuge Tubes

    labForce (a Thomas Scientific Brand)

    2.0mL Posi-Click™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

  • …0.5, 1.5, 1.7, 2.0 mL microtubes, culture tubes, 50 or 15 mL centrifuge tubes, PCR strips, PCR plates, PCR tubes Can be configured to users needs 4 colored sections Additional rack sections can be added Made of polypropylene Freezable to -80C Autoclavable 4 part rack per case …

  • …cone and improved access to a wider variety of tubes and wells. The epT.I.P.S. are available in three purity levels (Eppendorf Quality, PCR Clean, and Eppendorf Biopur®) and a variety of packaging forms, including bulk, boxes, refill trays, racks and individually wrapped tips. Packaging…

  • Cardboard Microtube Boxes

    Heathrow Scientific

    … Will fit into most standard freezer racking 0.2 mL tube (9.5 mm max) version has 169 wells in a 13 x 13 format 0.5 mL tube (12 mm max) version has 100 wells in a 10 x 10 format Complete with well dividers in packs of 10 *Must use tubes capable of being stored at low temperatures.

  • Round Floating Microtube Racks

    Thermo Scientific Nalgene

    …reduced temperatures (-70° to +100°C) White, polypropylene racks that float, but suspend entire microtube in liquid Built-in handle and legs for easy handling in bath or on bench Autoclavable racks take 1.0, 1.2, 1.5 and 2.0 mL tubes. 2591C36 has 20 places and are 3 3/4" in diameter.…

  • …8 or 12 tube strips or large quantities of individual 0.2 mL PCR tubes Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack

  • Amplifyt™ PCR Rigid-Strip Tubes With Attached Caps

    labForce (a Thomas Scientific Brand)

    …white.  All caps are flat and optically-clear for realtime PCR assays Rigid design is easy to work with minimizing the need to work with a PCR rack Conveniently stacked in bags of 12 strips per bag (10 bags per unit) minimizes the risk of contamination Certified free of detectable…

  • …Eppendorf Tube Racks and Eppendorf Cuvette Rack Benchtop racks are essential laboratory accessories for efficient processing, transport, and short-term storage of sample preparation tubes, cryogenic tubes, and cuvettes. The comprehensive Eppendorf Tube Rack and Eppendorf Cuvette Rack system…

  • …and temperature resistance Racks float with full load of filled tubes Molded handle in center of rack for comfort and support during transport Legs allow rack to stand upright for use on benchtopUse in ice, waterbaths or on the benchtop 65mm round rack fits most 400mL beakers Commonly…

  • Fits in all standard 5.25 inch freezer racks Alpha-numerically indexed - right on the box itself Frosted marking panel on 2 sides These new boxes are designed to hold 81 cryogenic vials (1.2 to 2.0ml) or microcentrifuge tubes (1.5 to 2.0ml). Translucent lid provides a clear view of…

  • …the side of the tube). The 1.7ml and 0.5ml sizes do not have injection nubs at the bottom and, therefore, have extremely smooth round bottoms for improved visibility and pellet formation. Tube rims and caps are small enough to fit side by side, in almost any rack. Caps make a "clicking"…

  • …each and every type of test tube mixing with brilliant efficiency. This versatile unit comes standard with a mixed test tube rack, supporting 0.5 to 50 ml test tubes. Additionally 8 optional racks are available, to satisfy your specific laboratory needs. Outfitted with 2 vortex frequencies, this…

  • tubes and 2.0mL cryo- vials. These double-sided racks hold 1.7mL and 2.0mL tubes on one side and 0.5mL on the reverse side. Rack and clear lid are fully autoclavable (122°C) and freezable(-80°C). Made of polypropylene. 96 Place Holds 0.5 mL microtubes on one side or 1.5, 1.7, 2.0 mL

  • …individual 0.2 mL PCR tubes   Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack securely in…

  • …individual 0.2 mL PCR tubes   Removable strip tube rack Tube wells are alphanumerically matrixed Fluorescent colors This rack is designed in the traditional 96 well 8 x 12 microtiter format. Four retainer clips hold a removable 8 x 12 strip tube rack securely in…

  • Interlocking 20-Place Tube Racks

    Heathrow Scientific

    …several racks for large experiments Heavy polypropylene construction Glove friendly Hold 1.5/2.0 mL tubes Racks slide together on both sides. Internal ribbing make racks stable and sturdy. The “Hold-It” finger slot on the front of the racks allows racks to be held…

  • …hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Holds 18 each 1.5 ml microcentrifuge tubes, 10.5 mm in diameter Overall dimensions (w x d x h): 2.0 x 6.0…

  • Cube Rack

    Heathrow Scientific

    …colors Solidly constructed cube rack accommodates four 50 mL tubes, ten 15 mL conical tubes, twelve 12 x 75 or 12 x 100 tubes or sixteen 1.5-2.0 mL microcentrifuge tubes. Rack slides together on any side allowing the user to work with different tubes on as many connected racks as desired.

  • Chain Tube Rack

    Heathrow Scientific

    …hold multiple size tubes (5/15 mL and 15-17mm tubes) in one configurable rack Open design allows exposure to water and ice baths and helps reduce identification errors Create different shapes and rack sizes with up to 16 wells depending on the need: straight line, a circle, 2 x 8, 4 x 4, etc. …

  • Blocks Beta-Radiation on the bench. Minimum wall thickness: 5/8 inch (16mm). 4 x 6 format. Maximum tube capacity: 24 x 1.5 or 2.0 mL. Rack comes with lid.

  • tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL

  • Available for 2 mL, 15 mL, and 50 mL tubes Alphanumerical grid reference on top tier for easy identification of samples Easy to assemble; simply fold and snap together securely

  • …between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce…

  • …between 2.0mL and 5.0mL. With the same diameter and conical shape as 15mL tubes, these shorter 5.0mL Midi centrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.