2 Ml Microcentrifuge Tubes

2.0mL Posi-Lock™ Graduated Microcentrifuge tubes feature a small, easy-to-open/close cap with the assurance of an audible "click" to know that your sample is secure. Boilproof Fits all standard 2.0mL centrifuge rotors, racks, and storage boxes Graduated every 100µL for…

…tubes and caps Freezable to -80°C Thomas microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 1.5 mL tubes are graduated at 0.1, 0.5, 1.0 and 1.5 mL. 2.0 mL…

Electronic locks. Centrifugation only when the lid is locked. The lid opens automatically after centrifugation. Fast Lifting Speed, The electronic brake Low Noise Capacitive touchpad, responsive. LCD display. Real-time display of speed, time and operating status. Centrifugal time and…

Electronic locks. Centrifugation only when the lid is locked. The lid opens automatically after centrifugation. Fast Lifting Speed, The electronic brake Low Noise Capacitive touchpad, responsive. LCD display. Real-time display of speed, time and operating status. Centrifugal time and…

Manual mode & automatic mode. Fast heating, with overheat protection switch to prevent overheating. Display setting parameters and real-time parameters simultaneously, easy to observe and use.

BRAND microcentrifuge tubes fit most common rotors and may be spun up to 30,000 RCF (g) (10,000 x g for 0.5mL; 20,000 x g for 1.5mL; 30,000 x g for 1.5mL and 2.0mL with lid closure at 20°C for 20 min). Manufactured from virgin polypropylene, these highly translucent tubes are free from flash,…

…Centrifuge tubes have a maximum (RCF) of 16,000g and are packaged in easy opening plastic bags. Conical bottom available in three sizes: 0.5, 1.5 and 2.0mL Self-standing available in 2.0mL Also available in a 1.5mL opaque black tube to protect light sensitive compounds All tubes…

1.5 and 2.0 ml microcentrifuge tubes, graduated, with frosted window and flat, safe-lock cap These microcentrifuge tubes are moulded from virgin polypropylene. Their safe-lock mechanism guarantees closed tubes even during boiling or autoclaving. The innovative cap design includes an additional…

… External graduations and frosted writing spot for easy sample identification Flat cap surface for convenient labeling Withstands maximum RCF of 17,000 x g Costar microcentrifuge tubes are certified RNase-/DNase-free and are autoclavable. The tubes are made of polypropylene.

… The 300D is supplied with s 24 place angle easy access rotor that can accommodate tube sizes of 1.5ml and 2.0ml microcentrifuge tubes. Additional adapters are available for 0.5ml, 0.4ml, and 0.2ml tubes. The rotor is equipped with a cover that easily "snaps" on and off. The 300D is…

…area on tubes and caps Freezable to -80°C Microcentrifuge tubes are designed to provide secure, leakproof seals while remaining easy to open. Polypropylene tubes are autoclavable to 120°C at 15 psi for 15 minutes. 0.6 mL tubes are graduated at 0.2, 0.4 and 0.6 mL. 2.0 mL are…

…target in the center. The 1.5 mL and 2.0 mL tubes have an additional textured writing surface on the side of the tube. G-Tubes are made of a tough, transparent and specially formulated polypropylene for better sample viewing and overall strength. These tubes are designed with thicker walls…

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable.…

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable.…

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable.…

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable.…

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable.…

Polypropylene (PP) Reversible 96-well rack in an 8 x 12 format One side holds 1.5 mL, 1.8 mL, or 2.0 mL microcentrifuge tubes; the other side holds 0.5 mL tubes Alpha-numerically labeled, stackable, autoclavable

Premium quality, 1.5 mL tubes Leak tested to 20,000 RCF Attached lid Uniform lid membrane thickness Frosted writing area Attached lids provide a tight leakproof seal, can be easily opened and allow trouble-free piercing. Tubes are leak tested to 20,000 RCF for 20 minutes at…

For medium-sized sample volumes. The 16mm tube is compatible with 15 ml centrifuge rotors. Polypropylene. RNase, DNase, Pyrogen and DNA free. Centrifugation up to 25,000 g. Autoclavable. Temp range +121 °C to -196 °C.

…Tube is made of inert virgin-polypropylene copolymer, to minimize the risk of altering samples Universal use - Accommodates all fixed angle head microcentrifuges (0.5ml and 2.0ml upright models require adapter Cat. No. 4212). Will withstand maximum G-forces of all current microcentrifuge…

…Microcentrifuge Tube Racks are available in five models with 6 to 96 wells. An alphanumeric grid allows for indexing rows and columns, therefore facilitating tube location. These racks will hold 1.5 ml and 2.0 ml snap cap Microcentrifuge tubes. They will also accommodate the popular 0.5 ml to 2.0 ml…

Polypropylene rack is a reversible 96-well rack in an 8 x 12 format. One side holds 1.5 ml, 1.8 ml, or 2.0 ml micro-centrifuge tubes (11.3 mm hole diameter) ; the other side holds 0.5 ml tubes (7.9 mm hole diameter). Both sides are alpha-numerically labeled. The racks are stackable and autoclavable.…

Posi-Lock™ capless tubes are ideal for customers not needing to seal their samples.  With no cap to interfere, collecting from spin columns is easy and mess-free with no caps to break off during centrifugation. Graduated every 100µL for easy volume identification Ultra-clear…

…Packed 500 in a bag and 10 bags in a pack. All style of tubes and caps are autoclavable. Tubes can be centrifuged to 20,000 RCF. Available in 0.5mL, 1.5mL, and 2.0ml sizes in both conical and freestanding versions. 2.0ml and 1.5ml Tubes have a side writing surface and graduations on some versions.…

Made of high impact polystyrene This microcentrifuge tube storage box with a polyurethane foam insert is ideal for holding up to 64 tubes from 0.5 ml to 2 ml. It should be used within a temperature range of -90 °C to 80 °C. A transparent cover allows you to see the contents of the box, and…

…enables you to see how cold your samples are at a glance. IsoFreeze® color change racks undergo a dramatic change to a contrasting color at 7ºC. Dimensions: 146 × 105 × 70 mm. Tube capacity: 24 x 0.5, 1.5, 2.0 mL snap or screw-cap style tubes. Rack comes with lid.