16 Gauge Needles

Compare Tool

Select up to 3 products

16 Gauge Needles
1 - 25 of 25
Sort
View
Show
  • Metal hub (nickel plated brass) needles can be used with TLL syringes and LT or TLL connectors. The needles are 304 stainless steel (sst.). Standard needle length is 2" / 51 mm. Metal hub (N) needles are available in convenient six packs. Custom needle lengths and point styles are available.

  • …removed until actual use. Color-coded hub identifies gauge, as follows: 30 gauge needle is beige; 27 gauge, grey; 26 gauge, tan; 25 gauge, blue; 23 gauge, turquoise; 22 gauge, black; 21 gauge, green; 20 gauge, yellow; 18 gauge, pink; and 16 gauge, purple. Gage x length are indicated in listings.…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • PTFE syringe tubing gauge

    MilliporeSigma

    …with these PTFE needles must be punctured with a hollow SS needle. The PTFE needle is then threaded through. After threading, the SS needle is withdrawn, allowing the septum to seal around the PTFE needle.For 20 ga PTFE use Z126756 (14 ga SS); 18 ga PTFE use Z126764 (13 ga SS); 16 ga PTFE use…

  • Blunt end (90° cut) stainless steel needles with a luer lock fitting, used for nitrogen gas blowdown. Available with chrome plated or polypropylene hubs. Optional FEP coating protects against corrosive solvents. 4 inches long 16 or 19 gauge

  • The Dynarex Syringes with Needle are designed for comfortable injections. The thin wall needles have a double bevel, allowing for ease of penetration and a greater volume of fluid to pass. All needles are color coded to represent the gauge of the needle and attach to the syringe by either luer lock…

  • Lavender Threaded Luer Lock Hub; 30 gauge 516 inch - id inch:0.006(0.1524mm) od inch:0.012(0.3048mm). Polypropylene plastic threaded hub, with a UV bonded stainless steel canula.

  • …unique plunger design minimizes bending and seizing, and the cone tip needle point style has been developed specifically to withstand multiple fast septum injections. Select from a wide range of fixed needle and removable needle options. PTFE tipped replaceable plunger versions are available for…

  • 3 Layer Septa

    Hamilton

    …life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick Average life: 100 injections with a 26s gauge needle Maximum operating temperature: 400°C 12 per package

  • …7 mm open end wrench 8 mm x 10 mm open end wrench 16 mm x 17 mm open end wrench Rubber-tipped slide-lock tweezers Scoring wafers Inlet liner removal tool Septum puller Mini wool puller/inserter tool 4-inch tapered needle file Swivel head flashlight Mini hand drill set …

  • …7 mm open end wrench 8 mm x 10 mm open end wrench 16 mm x 17 mm open end wrench Rubber-tipped slide-lock tweezers Scoring wafers Inlet liner removal tool Septum puller Mini wool puller/inserter tool 4-inch tapered needle file Swivel head flashlight Mini hand drill set …

  • …adjustable needle exposure of 0 to 20 mm and offer compatibility with most infusion pumps and stereotaxic holders. Needle rigidity improves insertion path accuracy Minimal tissue damage reduces injection variability Reduced sample loss saves money and materials Fine gauge needle

  • Includes: Capillary installation gauge for Bruker/Varian GCs 1/8", 3/16", and 1/4" nylon brushes 1/4", 3/8", and 3/16" stainless steel wire tube brushes Stainless steel surface brush 6 stainless steel jet reamers (0.25–0.65 mm OD) 1/4" x…

  • Includes: Capillary installation gauge for Agilent GCs Inlet wrench for Agilent GCs Septum nut removal tool 1/8", 3/16", and 1/4" nylon brushes 1/4", 3/8", and 3/16" stainless steel wire tube brushes Stainless steel surface brush 6 stainless…

  • …each sample position via needle valves Standard Features: Adjustable flow meter, 0-10 L/min High temperature limit switch for safety Dual band spring hoist assembly (except in dry bath model) Precision needle valve tube assembly Needles, 4 inch x 19 gauge with chrome plated brass…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.