15ml Conical Tubes

Compare Tool

Select up to 3 products

15ml Conical Tubes
1 - 32 of 60
Sort
View
Show
  • 15 & 50mL Centrifuge Tubes

    Argos Technologies

    …black graduations area accurate to ±2%, 1mL increments (15mL) or 2.5mL increments (50mL) Available in cardboard racks or in resealable zip closure bags Can be spun up to 12,000g (15mL) & 15,000g (50mL) Conical Bottom Sterilized with gamma irradiation, RNase & DNase…

  • 15mL & 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes per…

  • …Efficient automated production reduces cost and assures high quality Ease of Use – Exceptionally clear tubes have black printed graduation marks to full volume of 15mL or 50mL, a bright white marking space, and are packaged in heavy duty, zip, re-closable bags. Eco Friendly –…

  • Rated to 12,000 RCFPrinted graduations and writing area for sample identificationScrew caps can be closed with one hand. Sterile options are also available. RNase-/DNase-freeNonpyrogenic.

  • …accommodate tube sizes of 15mL, 50mL, and 1.5/2.0mL microcentrifuge tubes. In addition the LSE Compact Centrifuge will accommodate a swing-out rotor for 6 x 5mL tubes. Optional adapters accommodate other various tube sizes including standard conical tubes and round bottom blood tubes. The LSE…

  • 15 & 50mL Centrifuge Tubes

    Celltreat Scientific

    …identification All tubes are manufactured from high quality polypropylene and have smooth, flat surface polyethylene (HDPE) caps Maximum RCF is 12,000g for 15mL conical bottom tubes, 16,000g for 50mL conical bottom tubes, and 6,000g for self-standing tubes Polystyrene tubes Max Force (RCF)…

  • 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube

  • Screw Cap Centrifuge Tubes

    Stockwell Scientific

    Our 15mL and 50mL conical centrifuge tubes are designed for the demanding and stressful conditions encountered in today’s laboratories. Our engineers are continually seeking to improve these products to perform at levels beyond your expectations. Our 50mL tubes are rated at 10,000 RCF. Printed…

  • Racked Centrifuge Tubes

    United Scientific Supplies

    Centrifuge Tube and Rack sets are a convenient solution for organizing and storing Conical Bottom tubes. Racks are made of expanded polystyrene (EPS) and include holes arranged in a zigzag format for easy dispensing. Racks contain 50 of the 15ml tubes or 25 of the 50ml tubes. Sterile tubes are…

  • 15 mL Centrifuge Test Tubes

    Globe Scientific

    …solvents. Polystyrene tubes can withstand 1500 RPM during centrifugation. Polypropylene tubes can withstand 3000 RPM and are autoclavable and freezable. Globe's broad range of sizes are sure to fit most laboratory applications. 17 x 120mm (15mL capacity) test tube with conical bottom, graduated. …

  • …racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks…

  • 15mL Conical Tubes

    MP Biomedicals

    15mL graduated conical tube. Great for use as a general purpose tube.

  • An efficient and economic alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce…

  • Test Parameters PeroxySafe MSA; PeroxySafe STD; AciSafe MSA; FaSafe STD; AldeSafe STD; AldeSafe MSA; AlkalSafe STD

  • Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…

  • An efficient and economic alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce…

  • These 15mL PYREX® conical centrifuge tubes have white enamel graduations. The 15mL sizes are graduated upward from tip in 0.1mL divisions.

  • …racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification  Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm…

  • conical 15mL and 50mL centrifuge tubes are made of premium polypropylene, with exceptionally uniform wall thickness for clarity and centrifugal strength. Tubes and caps may be used for sample storage at temperatures as low as -45°C. The maximum centrifugal forces are 12,000xg for the 15mL tubes

  • 15ml tubes, dramatically reducing plastic waste, storage space and shipping costs. The potential contamination of pipettor shafts is greatly reduced because the 56mm total tube length (vs. 120mm for standard 15ml tubes) is short enough for standard 1ml or 5ml tips to reach the tube's conical

  • Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

  • An efficient and economical alternative to 15mL conical tubes when working with sample volumes between 2.0mL and 5.0mL. With the same diameter and conical shape as 15mL tubes, these shorter 5.0mL Midi centrifuge tubes: Reduce total cost to the lab for purchase and use Reduce…

  • Magic Touch™ Round Floating Tube Racks

    Bel-Art - SP Scienceware

    …Magic Touch™ Round Floating Tube Racks float in water baths, melted ice, dry ice alcohol slurries or liquid nitrogen. Available to fit 1.5ml microcentrifuge tubes or 15ml conical tubes, they come in blue, black, red and green.   Test tubes are gripped firmly, yet are easy to…

  • …Touch™ Rectangular Floating Tube Racks float in water baths, melted ice, dry ice alcohol slurries or liquid nitrogen.. Available to fit 1.5ml microcentrifuge tubes or 15ml conical tubes, they come in blue, black, red and green.   Test tubes are gripped firmly, yet are easy to…

  • …Five-O™ MacroTubes™ take all of the conveniences of standard 15mL conical tubes and scales them down for space efficiency and decreased natural resource consumption. Useful from -86°C to 110°C, these tubes are a valuable resource for boiling and for sample preservation at very…

  • …accept large labels. Rack withstands most lab chemicals and temperatures up to 121°C for a variety of lab procedures. 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required. Organize and store samples with space-efficient Thermo Scientific™…

  • 15mL Centrifuge Tubes

    Evergreen Scientific

    15 ml centrifuge tubes are precision molded from premium-grade, chemically-inert thermoplastics. Polystyrene tubes are glass-clear and our new formulation of polypropylene is nearly transparent. Accurate, easy-to-read graduations are molded-in at 0.1 ml intervals from 0-1 ml and at 0.5 ml…

  • Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes

  • …conditions +4 to 65°C, up to 85% RH non-condensing Speed 24 rpm Motion Rotating, rocking & tumbling Tube capacity H5500 36 x 1.5/2.0ml micro tubes Tube capacity H5500-15 10x15ml conical (15-17mm); 12 x 5ml (12-13mm diameter) tubes Tube capacity H5500-50 6 x 50ml conical tubes

  • Conical Bottom Centrifuge Tubes

    Bel-Art - SP Scienceware

    Chemical and corrosion resistant Conical bottom 15ml polyethylene tubes with rim  Molded in graduations Useful for refrigerated use and continuous temperatures up to 52°C (125°F) Capacity: 15ml O.D.: 17mm Length: 117mm

  • …rotor is included and designed to directly accept 10mL and 15mL test-tubes (conical or round bottom), while optional adapters are also available for use with all popular sizes of blood collection and culture tubes. Unlike most compact centrifuges in this class, the rotor can be easily…

Compare Tool

Select up to 3 products

Please Log In

Don't have a web profile? Create one now.