15ml Conical Tube Rack

Epoxy-coated steel wire rack holds 15 conical bottom 15mL centrifuge tubes. Top and middle sections have 18mm square holes and are centered over rails in the base that hold the tips of the tubes. Generously spaced for easy handling Heat-cured epoxy coating is unaffected by organic…

Translucent, polypropylene, graduated, in styrofoam racks. Screw-on caps provide firm, leak-resistant fit.

…to break, no sharp edges. Endplates accept large labels. Rack withstands most lab chemicals and temperatures up to 121°C for a variety of lab procedures. 15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required. Organize and store samples with…

…Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable Chemically resistant to drips Design of bottom prevents racks from sticking/freezing to surfaces Widely spaced design catches drips and allows tubes to be retrieved more easily Size: 15mL Cap…

…of standard 15mL conical tubes and scales them down for space efficiency and decreased natural resource consumption. Useful from -86°C to 110°C, these tubes are a valuable resource for boiling and for sample preservation at very low temperatures. Choose from gamma sterilized racked packaging…

Blue anodized aluminum blocks hold tubes upright and promote conduction of heat or cold from the Temp-Zone area on selected models of Purifier Cell Logic Biosafety Cabinets to help maintain sample temperature. Rack holds 12 conical 15 mL tubes

…than one rack to create a handy work station. Autoclavable (122°C) and freezable (-80°C). These racks are designed for Labcon centrifuge tubes, other tube brands may not fit correctly. 25 Place Holds 15 mL conical centrifuge tubes Includes numbered wells Racks lock together…

…15mL conical tubes fit 20mm racks; 50mL conical fit 30mm racks. No assembly is required; rack is ready to use. Securely hold a full load of test tubes or centrifuge tubes for 13, 16, 20, 25 and 30mm diameter sizes with Thermo Scientific™ Nalgene™ Unwire™ Test Tube Racks.…

15mL & 50mL Conical Tubes High-clarity, medical-grade polymer Graduations every 1 mL (15 mL tube) or 5 mL (50 mL tube) increments Rated to 15,000 x G Temperature range: -80° to 40°C Tube racks are recyclable Both 50mL and 15mL tubes are BQ215 presented 25 tubes per…

…bagged and racked tubes, the individually wrapped concial tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force for the 15mL tubes is 12,000xg, while the 50mL tubes can reach…

…Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable Chemically resistant to drips Design of bottom prevents racks from sticking/freezing to surfaces Widely spaced design catches drips and allows tubes to be retrieved more easily Size: 15mL Cap…

…Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable Chemically resistant to drips Design of bottom prevents racks from sticking/freezing to surfaces Widely spaced design catches drips and allows tubes to be retrieved more easily Size: 15mL Cap…

…Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable Chemically resistant to drips Design of bottom prevents racks from sticking/freezing to surfaces Widely spaced design catches drips and allows tubes to be retrieved more easily Size: 15mL Cap…

…Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable Chemically resistant to drips Design of bottom prevents racks from sticking/freezing to surfaces Widely spaced design catches drips and allows tubes to be retrieved more easily Size: 15mL Cap…

…Plastic rack is manufactured from polypropylene and is autoclavable, reusable, and recyclable Chemically resistant to drips Design of bottom prevents racks from sticking/freezing to surfaces Widely spaced design catches drips and allows tubes to be retrieved more easily Size: 15mL Cap…

Centrifuge Tube and Rack sets are a convenient solution for organizing and storing Conical Bottom tubes. Racks are made of expanded polystyrene (EPS) and include holes arranged in a zigzag format for easy dispensing. Racks contain 50 of the 15ml tubes or 25 of the 50ml tubes. Sterile tubes are…

…RCF is 12,000g for 15mL conical bottom tubes, 16,000g for 50mL conical bottom tubes, and 6,000g for self-standing tubes Polystyrene tubes Max Force (RCF) is 3,000g Temperature range of -80°C to 120°C 15 and 50mL clear tubes are available in recyclable racks or bulk packaged in…

…racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit 30mm racks …

Conical 15mL and 50mL centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a flat top…

…  All Oxford Lab Products 50 and 15mL conical tubes are: Graduated with high-contrast black graduations for easily volume determination Made of ultra-clear premium polypropylene for easy sample visualization Available Racked or Bulk/Reclosable bags Pre-sterile Rated…

… These Racks are designed to hold Conical Bottom Centrifuge tubes. These paper racks hold 25 (15ml and 50ml) Conical Bottom Centrifuge Tubes. Available in Red/ Blue Color Cap. These Racks are designed to hold Conical Bottom Centrifuge tubes. These paper racks hold 25 (15ml and 50ml) Conical Bottom…

…stable racking of tubes Good temperature and chemical resistance to withstand a variety of lab procedures Large, flat endplates for labeling and easy sample identification  Dense nylon material will not float in water bath 15mL conical tubes fit 20mm racks and 50mL conical tubes fit…

…polypropylene 15ml and 50ml conical tubes available; large white writing area for easy marking Double threaded design reduces cross-threading; caps are easily opened and closed Flat-top caps can be written on Gamma radiation sterilized, non-pyrogenic Available in racked package…

…dry bath block heaters, tube racks and thermal shakers/vortexers. The 16mm tube diameter is identical to the diameter of standard 15ml tubes, which nsures further compatibility with centrifuge rotors, etc. In many applications, these tubes have replaced 15ml tubes, dramatically reducing plastic…

…hydrophobic membrane to allow gas exchange Maximum RCF is 12,000g for 15mL tubes, 16,000 for 50mL conical bottom tubes, and 6,000g for self-standing tubes Packaged sterile (gamma irradiated) in zip-closure bags or foam racks NEW - Vent Control Labels. Labels configured to cover 1-5 of the…

…conical 15mL and 50mL centrifuge tubes are made of premium polypropylene, with exceptionally uniform wall thickness for clarity and centrifugal strength. Tubes and caps may be used for sample storage at temperatures as low as -45°C. The maximum centrifugal forces are 12,000xg for the 15mL tubes…

Conical 10ml, 15ml, and 50ml centrifuge tubes are made of premium polypropylene for clarity and centrifugal strength. Tubes and caps may be frozen at temperatures as low as -86°C. The maximum centrifugal force is 12,000xg for the 10ml or 15ml tubes and 15,000xg for the 50 ml tubes*. Caps have a…

MTC Bio's 25mL tube is the newest addition to our family of screw cap conical tubes. Closing the obvious gap between 15mL and 50mL tubes, they are ideal for any application that requires more than 15mL and less than 50mL, including midipreps, general sample prep, centrifugation, mixing and…

… With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination…

… With the same diameter and conical shape as 15mL tubes, these shorter 5.0mL Midi centrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination…

… With the same diameter and conical shape as a 15mL tube, the shorter 5.0mL macrocentrifuge tubes: Reduce total cost to the lab for purchase and use Reduce environmental impact during production and disposal Require no special equipment or racks Reduce pipet shaft contamination…

…quality Ease of Use – Exceptionally clear tubes have black printed graduation marks to full volume of 15mL or 50mL, a bright white marking space, and are packaged in heavy duty, zip, re-closable bags. Eco Friendly – Paperboard racks are readily recyclable in the well-established…